New occurrence of potential phosphate resource in northeast Jordan

An exploration program aided by field investigation, exploration drilling, detailed sampling, lithological and petrological studies, geochemical investigation, and resource calculation leads to the discovery of a potential phosphate resource in northeast Jordan close to the international border with Saudi Arabia and Iraq. The studied phosphate is of the Middle Eocene age that belongs to the Wadi Shallala Formation. It is equivalent to the phosphate deposits recorded in the lower part of the Umm Wual Formation in the Turayf region of Saudi Arabia and the Eocene Ratga Formation in the Ethna phosphate deposit west of Iraq. The phosphorites in the region are broadly similar in mineralogical composition and geochemical affinities. X-ray diffraction indicates the presence of francolite with variable amounts of calcite and quartz. Most samples consist of phosphate clasts embedded in carbonate and silica matrix and cement. P₂O₅ content is up to 32.3 % with an average equal to 18.6 %. The impurity is caused by the presence of variable amounts of SiO₂ and CaO. The F% and F/P₂O₅ ratio in studied phosphates is lower compared with that in phosphates from Jordan and Saudi Arabia. The geological and geochemical results were integrated for resource estimation. Three high-grade phosphate layers with ≥23 % P₂O₅ were considered in the calculations. The phosphate resource is classified as an inferred resource. The total volume of the resource is about 649 million tons. The average P₂O₅ content is 24.57, and the stripping ratio is 1:5.8.     

Numerical solution and convergence analysis of steam injection in heavy oil reservoirs

In this paper, the numerical methods for solving the problem of steam injection in the heavy oil reservoirs are presented. We consider a 3-dimensional model of 3-phase flow, oil, water, and steam, with the effect of 3-phase relative permeability. Interphase mass transfer of water and steam is considered; oil is assumed nonvolatile. We apply the simultaneous solution approach to solve the corresponding nonlinear discretized partial differential equation in the fully implicit form. The convergence of finite difference scheme is proved by the Rosinger theorem. The heuristic Jacobian-Free-Newton-Krylov (HJFNK) method is proposed for solving the system of algebraic equations. The result of this proposed numerical method is well compared with some experimental results. Our numerical results show that the first iteration of the full approximation scheme (FAS) provides a good initial guess for the Newton method. Therefore, we propose a new hybrid-FAS-HJFNK method while there is no steam in the reservoir. The numerical results show that the hybrid-FAS-HJFNK method converges faster than the HJFNK method.     

Prediction of water inflow to mechanized tunnels during tunnel-boring-machine advance using numerical simulation

An accurate estimate of the groundwater inflow to a tunnel is one of the most challenging but essential tasks in tunnel design and construction. Most of the numerical or analytical solutions that have been developed ignore tunnel seepage conditions, material properties and hydraulic-head changes along the tunnel route during the excavation process, leading to inaccurate prediction of inflow rates. A method is introduced that uses MODFLOW code of GMS software to predict inflow rate as the tunnel boring machine (TBM) gradually advances. In this method, the tunnel boundary condition is conceptualized and defined using Drain package, which is simulated by dividing the drilling process into a series of successive intervals based on the tunnel excavation rates. In addition, the drain elevations are specified as the respective tunnel elevations, and the conductance parameters are assigned to intervals, depending on the TBM type and the tunnel seepage condition. The Qomroud water conveyance tunnel, located in Lorestan province of Iran, is 36 km in length. Since the Qomroud tunnel involved groundwater inrush during excavating, it is considered as a good case study to evaluate the presented method. The groundwater inflow to this tunnel during the TBM advance is simulated using the proposed method and the predicted rates are compared with observed rates. The results show that the presented method can satisfactorily predict the inflow rates as the TBM advances.     

Subduction-related mafic to felsic magmatism in the Malayer–Boroujerd plutonic complex,western Iran

The Malayer–Boroujerd plutonic complex (MBPC) in western Iran, consists of a portion of a magmatic arc built by the northeast verging subduction of the Neo-Tethys plate beneath the Central Iranian Microcontinent (CIMC). Middle Jurassic-aged felsic magmatic activity in MBPC is manifested by I-type and S-type granites. The mafic rocks include gabbroic intrusions and dykes and intermediate rocks are dioritic dykes and minor intrusions, as well as mafic microgranular enclaves (MMEs). MBPC Jurassic-aged rocks exhibit arc-like geochemical signatures, as they are LILE- and LREE-enriched and HFSE- and HREE-depleted and display negative Nb–Ta anomalies. The gabbro dykes and intrusions originated from metasomatically enriched garnet-spinel lherzolite [Degree of melting (f_mel) ~ 15%] and exhibit negative Nd and positive to slightly negative ε_Hf(T) (+ 3.0 to ? 1.6). The data reveal that evolution of Middle Jurassic magmatism occurred in two stages: (1) deep mantle-crust interplay zone and (2) the shallow level upper crustal magma chamber. The geochemical and isotopic data, as well as trace element modeling, indicate the parent magma for the MBPC S-type granites are products of upper crustal greywacke (f_mel: 0.2), while I-type granites formed by partial melting of amphibolitic lower crust (f_mel: 0.25) and mixing with upper crustal greywacke melt in a shallow level magma chamber [Degree of mixing (f_mix): 0.3]. Mixing between andesitic melt leaving behind a refractory dense cumulates during partial crystallization of mantle-derived magma and lower crustal partial melt most likely produced MMEs (f_mix: 0.2). However, enriched and moderately variable ε_Nd(T) (? 3.21 to ? 4.33) and high (⁸⁷Sr/⁸⁶Sr)_i (0.7085–0.7092) in dioritic intrusions indicate that these magmas are likely experienced assimilation of upper crustal materials. The interpretations of magmatic activity in the MBPC is consistent with the role considered for mantle-derived magma as heat and mass supplier for initiation and evolution of magmatism in continental arc setting, elsewhere.     

Health risk of heavy metals from vegetables irrigated with sewage water in peri-urban of Dera Ismail Khan,Pakistan

Health risks of heavy metals in vegetables irrigated with sewage water were investigated in the present study. The findings indicated a massive accumulation of heavy metals in soil and vegetables collected from Dera Ismail khan, Pakistan. The concentration levels of heavy metal in vegetables grown on soil irrigated with untreated sewage water were significantly higher at (P ≤ 0.001) than in vegetables grown on fresh-water-irrigated soil and proceeded the recommended limits of World health organization. Moreover, the findings also indicated that the adults and children consuming such vegetables ingested a large proportion of the selected toxic metals. Health risk index was greater than one for Pb and Cd in all the selected vegetables and was greater than one for Ni in three vegetables like Spinacia oleracea, Benincasa fistulosa and Lactuca sativa. Health risk assessment would be a useful tool for information regarding any threats of heavy metals contamination in vegetables.     

Isolation of <Emphasis Type="Italic">Bacillus cereus</Emphasis> from botanical soil and subsequent biodegradation of waste engine oil

Waste engine oil causes a vital environmental pollution when it spill during change and transportation and products of waste engine oil causes lethal effects to the living systems. Thus, abiotic and biotic approaches are being extensively used for removal of waste engine oil pollution. Therefore in present study, waste engine oil degradation was accomplished by a new bacterial culture, isolated from the soil by an enrichment technique. Morphological, biochemical and gene sequence analysis revealed that isolate was Bacillus cereus. Subsequently, biodegradation potential of B. cereus for waste engine oil was studied. Experimental variables, such as pH, substrate concentration, inoculum size, temperature and time on the biodegradation, were checked in mineral salt medium. The biodegradation efficiency of B. cereus was determined by gravimetry, UV–visible spectrophotometry and gas chromatography. In addition, waste engine oil was also characterized by GC–MS and FTIR for its major constituents, which showed total 38 components in waste engine oil, including hopanes, benzopyrene, long-chain aliphatic hydrocarbons, dibenzothiophenes, biphenyl and their derivatives. Results of successive biodegradation indicated that B. cereus was capable to degrade 1% of waste engine oil with 98.6% degradation potential at pH 7 within 20 days. Hence, B. cereus presents an innovative tool for removing the engine oil from the contaminated area.     

Air pollution forecasting from sky images with shallow and deep classifiers

Air pollution is one of the most important problems in the new era. Detecting the level of air pollution from an image taken by a camera can be informative for the people who are not aware of exact air pollution level be declared daily by some organizations like municipalities. In this paper, we propose a method to predict the level of the air pollution of a location by taking an image by a camera of a smart phone then processing it. We collected an image dataset from city of Tehran. Afterward, we proposed two methods for estimation of level of air pollution. In the first method, the images are preprocessed and then Gabor transform is used to extract features from the images. At the end, two shallow classification methods are employed to model and predict the level of air pollution. In the second proposed method, a Convolutional Neural Network(CNN) is designed to receive a sky image as an input and result a level of air pollution. Some experiments have been done to evaluate the proposed method. The results show that the proposed 9 method has an acceptable accuracy in detection of the air pollution level. Our deep classifier achieved accuracy about 59.38% which is 10 about 6% higher than traditional combination of feature extraction and classification methods.     

Ghaleh-khargushi rhyodacite and Gorid andesite from Iran: characterization,uses, and durability

Durability of building stones is an important issue in sustainable development. Crystallization of soluble salts is recognized as one of the most destructive weathering agents of building stones. For this reason, durability of Ghaleh-khargushi rhyodacite and Gorid andesite from Iran was investigated against sodium sulfate crystallization aging test. Petrographic and physico-mechanical properties and pore size distribution of these stones were examined before and after the aging test. The characteristics of the microcracks were quantified with fluorescence-impregnated thin sections. Durability and physico-mechanical characteristics of Ghaleh-khargushi rhyodacite are mainly influenced by preferentially oriented preexisting microcracks. Stress induced by salt crystallization led to the widening of preexisting microcracks in Ghaleh-khargushi rhyodacite, as confirmed by the pore size distributions before and after the aging test. The preexisting microcracks of Gorid andesite were attributed to the mechanical stress induced by contraction of lava during cooling. The number of transcrystalline microcracks was significantly increased after the aging test. The degree of plagioclase microcracking was proportional to its size. Durability of the studied stones depends on initial physico-mechanical properties, pore size distribution, and orientation of microcracks. Initial effective porosity is found to be a good indicator of the stones’ durability. Salt crystallization resulted in an increase in the effective porosity with a parallel decrease in the wave velocities. Surface microroughness parameters increased with the development of salt crystallization-induced microcracking. Gorid andesite showed higher quality and durability than Ghaleh-khargushi rhyodacite.     

Diagenetic evolution vis-a-vis reservoir characteristics of Dhosa sandstones,Ler dome,Kachchh, western India

The detrital mineralogy as well as diagenetic characters of the Dhosa Sandstone Member of Chari Formation exposed at the Lerdome, south of Bhuj was studied. In order to assess the potential of the Dhosa Sandstone as a reservoir, it is substantial to understand the diagenetic processes that are controlled largely by post-depositional cementation and compaction in addition to framework composition and original depositional textures. The petrologic analysis of 33 thin sections was carried out to discern primary composition and diagenetic features including primary and secondary porosity patterns. Monocrystalline quartz dominates the detrital mineralogy followed by polycrystalline quartz. Among the polycrystalline variety recrystallized metamorphic quartz surpasses stretched metamorphic quartz in terms of abundance. Feldspars comprise microcline and plagioclase where the former is dominant over the latter. Orthoclase too comprises a very small percentage. Mica, chert, rock fragments, and heavies form the remaining detrital constituent in descending order of their constituent percentage. The diagenetic precipitates are mainly carbonate (8.30%) and iron (7.80%) followed by clay (0.66%) and silica (0.88%) that are minor constituent of the total cementing material. The main paragenetic events identified are early cementation, mechanical compaction, late cementation, dissolution, and authigenesis of clays. The overall reservoir quality seems to be controlled by compaction and authigenic carbonate cementation. The minus cement porosity average 29.4%. The porosity loss due to compaction is 21.92% and by cementation is 29.71%. The loss of original porosity was due to early cementation followed by moderate mechanical compaction during shallow burial. Preservation of available miniscule primary porosity was ascribed to dissolution of carbonates and quartz overgrowth which resisted chemical compaction during deep burial. The studied sandstones may have low reservoir quality owing to existing porosity of less than 9%. More carbonate dissolution and its transformation in dolomite in sub-surface condition and macro-fracture porosity may result in enhanced secondary porosity and good diagenetic traps.     

Analysis of pervasive precipitation in similar gradient areas of Iran

Precipitation is a major climatic element with high spatial variations. Temporal and spatial variations may differ in large and small scales. It is, therefore, of utmost importance to study areas with similar gradients in terms of precipitation patterns in order to shed light on the complexities of precipitation variations. In the present study, attempts were made to identify areas with similar gradients experiencing the same precipitation pattern over a 50-year period (1964–2013). To this end, data were collected from synoptic stations in Iran in two phases (i.e., 1434 stations in the first phase and 673 stations in the second one). Alexanderson’s technique was adopted to examine sudden changes in precipitation patterns. The results showed that five regions with similar gradients could be identified in terms of precipitation patterns: negative and high variations, negative and moderate variations, positive and high variations, positive and moderate variations, and little or no variations. The distribution of such regions indicated that the regions with positive trends experienced more annual variations and had further spatial distribution. Furthermore, the findings revealed that the regions with negative precipitation patterns experienced more sudden changes in comparison with those with positive precipitation patterns. Additionally, more variations were observed in the precipitation patterns in recent years.