Isotopic composition of dissolved inorganic carbon in subsurface sediments of gas hydrate-bearing mud volcanoes, Lake Baikal: implications for methane and carbonate origin

We report on the isotopic composition of dissolved inorganic carbon (DIC) in pore-water samples recovered by gravity coring from near-bottom sediments at gas hydrate-bearing mud volcanoes/gas flares (Malenky, Peschanka, Peschanka 2, Goloustnoe, and Irkutsk) in the Southern Basin of Lake Baikal. The δ¹³C values of DIC become heavier with increasing subbottom depth, and vary between ?9.5 and +21.4‰ PDB. Enrichment of DIC in ¹³C indicates active methane generation in anaerobic environments near the lake bottom. These data confirm our previous assumption that crystallization of carbonates (siderites) in subsurface sediments is a result of methane generation. Types of methanogenesis (microbial methyl-type fermentation versus CO₂-reduction) were revealed by determining the offset of δ¹³C between dissolved CH₄ and CO₂, and also by using δ¹³C and δD values of dissolved methane present in the pore waters. Results show that both mechanisms are most likely responsible for methane generation at the investigated locations.     

Short-term variability of Jupiter’s extended sodium nebula

Ground-based optical observations of D₁ and D₂ line emissions from Jupiter’s sodium nebula, which extend over several hundreds of jovian radii, were carried out at Mt. Haleakala, Maui, Hawaii using a wide field filter imager from May 19 to June 21, 2007. During this observation, the east-west asymmetry of the nebula with respect to the Io’s orbital motion was clearly identified. Particularly, the D₁+D₂ brightness on the western side of Jupiter is strongly controlled by the Io phase angle. The following scenario was developed to explain this phenomenon as follows: First, more ionospheric ions like NaX⁺, which are thought to produce fast neutral sodium atoms due to a dissociative recombination process, are expected to exist in Io’s dayside hemisphere rather than in the nightside one. Second, it is expected that more NaX⁺ ionospheric ions are picked up by the jovian co-rotating magnetic field when Io’s leading hemisphere is illuminated by the Sun. Third, the sodium atom ejection rate varies with respect to Io’s orbital position as a result of the first two points. Model simulations were performed using this scenario. The model results were consistent with the observation results, suggesting that Io’s ionosphere is expected to be controlled by solar radiation just like Earth.     

Near-field beam pattern measurement of qualification model of ALMA band 8 (385–500 GHz) cartridge receiver

We have developed a near-field vector beam measurement system covering the range of frequencies from 385 to 500 GHz. The measurement set-up is capable of measurements with dynamic range exceeding 50 dB and amplitude and phase stability respectively of 0.1 dB/h and 1 degree/5 min at room temperature. Beam patterns of the ALMA band 8 corrugated horns and receiver optics block were measured at room temperature and lately compared with physical optics calculations obtained in the far-field. Both co-polar and cross-polar beam patterns of a qualification model of the ALMA band 8 cartridge cooled in a cartridge-test-cryostat have also been measured in the near-field as a detector of a submillimeter vector network analyzer. The measurements presented in this work refer to the lowest, middle and upper frequencies of band 8. The comparisons between software model and experimental measurements at these frequencies show good agreement down to ?30 dB for the main polarization component. The cross-polarization level of the beam propagating through the receiver optics block was also characterized. We found that a cross-polarization level better than ?28 dB can be achieved at all measured frequencies. The measured beam pattern of this receiver corresponds to efficiency of greater than 92% at the sub reflector (diameter of 750 mm) of the ALMA 12 m optics.     

Design formulas for tuned mass dampers based on A perturbation technique

Modal properties of tuned mass damper (TMD)-structure two-degree-of-freedom (2DOF) linear systems are studied employing a perturbation technique. Using the perturbation solutions, formulas relevant to designing the TMD for various types of loading are obtained; they are expressed as a function of mass ratio, tuning ratio, damping ratio of the TMD and damping ratio of the structure. Equivalent additional dampings of the structure due to the TMD are derived for random and harmonic forces. Matched expressions of equivalent damping, which are valid for detuned, i.e. non-optimal, conditions are also presented. The stability boundary of TMD-structure systems subject to linear self-excited forces is derived in a closed form. Using the perturbation solutions, procedures for optimizing the TMD parameters for various types of loading are explained and the optimal values are derived. The formulas obtained in this study can be used with good accuracy for mass ratios less than 0.02.     

Concentrations of Trace Elements in Carbonate Reference Materials Coral JCp-1 and Giant Clam JCt-1 by Inductively Coupled Plasma-Mass Spectrometry

Trace elements in the Geological Survey of Japan carbonate reference materials Coral JCp-1 and Giant Clam JCt-1 were determined by inductively coupled plasma-mass spectrometry after digestion with 2% v/v HNO₃. A standard addition method was adopted in this determination in order to neutralise the Ca matrix effect. In addition, Sc, Y, In and Bi were used as internal standards to control the matrix effect and correct instrumental drift. Of the eighteen elements measured in JCp-1, precisions for fourteen elements, including Cu, Cd and Ba, were better than 10% RSD and concentrations ranged from 0.002 μg g^-1 (Cs) to 8.02 μg g^-1 (Ba). The concentrations of measured trace elements in JCt-1, except for Cu, were lower than those in JCp-1. Precisions for all elements with concentrations higher than 0.04 μg g^-1 in JCt-1 were also better than 10% RSD and concentrations were found to be between 0.001 μg g^-1 (Cs) and 4.84 μg g^-1 (Ba). The concentrations of more than fifteen trace elements in the aragonite reference materials are reported here for the first time. Both reference materials are suitable for use in geochemical studies of environmental reconstruction based upon biogenic carbonate materials.     

Exsolution textures in orthopyroxene in aluminous granulites as indicators of UHT metamorphism: New evidence from the Eastern Ghats Belt, India

Highly aluminous orthopyroxene, coexisting with sapphirine, cordierite, sillimanite, quartz and garnet in various combinations, constitute granoblastic mosaic peak metamorphic assemblages in aluminous granulites from three localities in the Eastern Ghats Belt, India. Orthopyroxene contains four types of intergrowths: (a) involving sapphirine with or without cordierite, (b) involving spinel, but without sapphirine, (c) involving cordierite, but without sapphirine and spinel, and (d) involving garnet, without sapphirine, spinel or cordierite. On the basis of textural and compositional data, origin of the intergrowths is ascribed to breakdown of Mg-Tschermak component, locally also involving Fe- and Ti-Tschermak. An attempt is made to compute the “pre-breakdown” compositions of orthopyroxene by image analysis, which shows maximum Al₂O₃ content of 13.4 wt.% in the pristine orthopyroxene. Geothermometry, phase equilibria consideration and application of existing experimental data on alumina solubility in orthopyroxene coexisting with sapphirine and quartz, collectively indicate extreme thermal conditions of metamorphism (> 1000 °C) for the studied assemblages. This re-affirms the notion that Al₂O₃ solubility in orthopyroxene is the most powerful indicator of UHT metamorphism (Harley, S.L., 2004. Extending our understanding of ultrahigh temperature crustal metamorphism. J. Mineral. Petrol. Sci. 99, 140–158). The intergrowths are considered to have formed due to cooling from the thermal peak spanning a temperature range of approximately 150 °C. Appearance of diverse types of intergrowths is probably related to subtle differences in bulk composition, particularly Fe:Mg ratios.     

Hydrothermal carbonates in altered wall rocks at the Uwamuki Kuroko deposits, Japan

Magnesite, siderite and dolomite are characteristic alteration minerals occurring in Miocene hanging wall rocks of dacitic composition which host the Kuroko orebodies. These carbonates generally occur in a more stratigraphically upper horizon than chlorite alteration zone surrounding the orebodies. The Mg/(Mg+Fe) ratios of the carbonates decrease from the central alteration zone to marginal zone. The Mg/(Mg+Fe) ratios of carbonates and chlorite positively correlate. The δ¹⁸O and δ¹³C values of magnesite, siderite and dolomite positively correlate with each other and lie between the igneous and marine carbonate values. The petrographic, isotopic and fluid inclusion characteristics and thermochemical modelling calculations indicate that magnesite and dolomite formed in the central zone close to the orebodies due to the interaction of hydrothermal solutions with the biogenic marine carbonates. Calcite formed further from the orebodies from hydrothermal fluids which did not contain a biogenic marine carbon component. The compositional and textural relationships indicate that superimposed alterations (chlorite alteration and carbonate alteration) occurred in hanging wall rocks. The mode of occurrences and the Mg/(Mg+Fe) ratios of magnesite and dolomite occurring in hanging wallrocks are useful in the exploration for concealed volcanogenic massive sulfide-sulfate deposits. Received: 9 September 1997 / Accepted: 23 September 1997     

The Machangqing copper-molybdenum deposits, Yunnan, China — an example of Himalayan porphyry-hosted Cu-Mo mineralization

Summary The Machangqing copper-molybdenum deposits occur in the Shanjian fold belt, Yunnan Province, China. Two types of ores are distinguished: (1) Cu-Mo quartz veinlets in magnetite-series granite porphyry; and (2) Cu-Mo skarns occurring at the contact between the Ordovician sedimentary sequence and the granite porphyry. With decreasing temperature and of hydrothermal fluids initially in equilibrium with K-feldspar, the following alteration patterns developed within the porphyry, from the center outwards: silicification, K-silicate, phyllic and argillic alteration. The paragenetic sequence of alteration minerals observed in the Cu-Mo skarns resulted from decreasing temperature and/or increasing of the hydrothermal fluids initially in equilibrium with grandite garnet. Fluid inclusions in quartz suggest boiling during the mineralization. The mineralization temperatures based on filling temperatures and salinities of quartz are in the following ranges: about 265° to 400 °C and 5.0 to 14.6 wt.% NaCl eq. for the Cu-Mo veinlets; and 200° to 500 °C and 10.2 to 42.0 wt.% NaCl eq. for the Cu-Mo skarns. As is evident from log fo₂-pH diagrams, ores of the early stage of mineralization in the Cu-Mo skarns, characterized by the assemblage magnetite + pyrite + rare pyrrhotite + K-feldspar + quartz, were deposited from highly alkaline and high temperature fluids. With decreasing temperature and fo₂, the pH of the ore fluids was shifted towards slightly alkaline to neutral, with the resultant formation of the main stage ores, characterized by the assemblage chalcopyrite + pyrite + molybdenite + sphalerite + K-feldspar +sericite (muscovite) + epidote + uartz. Very minor amounts of ore minerals, including matildite, bismuthinite and electrum, are associated with a late stage of ore formation.In the case of the Cu-Mo veinlets, it can be stated roughly that both fs₂ and fo₂ conditions were in the stability field of pyrite, with pH of the ore fluids buffered by the assemblage sericite + K-feldspar +quartz ± calcite. K-Ar age determinations were made on the granite porphyry, biotite phenocrysts and hydrothermal biotite in the Cu-Mo skarns, giving ages of 42.5 to 34.6 Ma, 52.3 Ma, and 39.2 to 26.4 Ma, respectively.It is concluded that the Cu-Mo mineralization at Machangqing shows a close spatial and temporal association with the Himalayan felsic magmatism of the magnetite-series type.

---

Die Machangqing Kupfer-Molybdän-Lagerstätten, Yunnan, China — Ein Beispiel für prophyrische Cu-Mo Vererzung im Himalaya

Zusammenfassung Die Kupfer-Molybdän-Lagerstätten von Machangqing treten im Shanjian Faltengürtel in der Provinz Yunnan, China, auf. Zwei Erztypen sind unterscheidbar: (1) Cu-Mo Quarzgängchen in einem porphyrischen Granit der Magnetit-Serie; (2) Cu-Mo-Skarne am Kontakt zwischen der ordovizischen Sedimentabfolge und dem porphyrischen Granit. Mit Abnahme der Temperatur und des Verhältnisses der hydrothermalen Fluide, die ursprünglich mit Alkalifeldspat im Gleichgewicht waren, entwickelten sich in diesem Porphyrstock vom Zentrum randwärts folgende Alterationszonen: Silizifizierung, K-silikatische, phyllische und argillische Alteration. Die paragenetische Abfolge der Alterationsminerale, die in den Cu-Mo Skamen zu beobachten sind, sind das Resultat abnehmender Temperatur und/oder einer Zunahme des -Verhältnisses der hydrothermalen Fluide, die ursprünglich mit Grandit-Granat im Gleichgewicht waren. Flüssigkeitseinschlüsse in Quarz weisen auf Siedeprozesse während der Mineralisation hin. Die aus den Einschlußtemperaturen und Salinitäten in Quarz bestimmten Mineralisationstemperaturen liegen für die Cu-Mo-Gängchen zwischen 265–400 °C und zwischen 5–14.6 Gew.% NaCI Äquiv. und zwischen 200–500 °C und 10.2–42 Gew.% NaCI Äquiv. für die Cu-Mo Skarne. Wie aus log fo₂-pH Diagrammen hervorgeht, ist die im Frühstadium der Cu-Mo Skamvererzung entstandene Vergesellschaftung von Magnetit +Pyrit+selten Magnetkies + Alkalifeldspat + Quarz durch Ausfällung aus sehr alkalischen und hochtemperierten Fluiden entstanden. Mit Temperatur- und fo₂-Abnahme wurde der pH der Lösungen leicht alkalisch bis neutral. Dies resultierte in der Bildung der Erze des Hauptstadiums, das durch Chalcopyrit + Pyrit + Molybdänit + Sphalerit + Alkalifeldspat + Serizit (Muscovit) + Epidot + Quarz charakterisiert ist. Sehr geringe Mengen an Erzmineralen inklusive Matildit, Bismuthinit und Elektrum sind dem Spätstadium der Vererzung zuzuordnen. Für die Cu-Mo-Gängchen läßt sich etwas verallgemeinernd feststellen, daß fo₂ und fs₂ im Stabilitätsbereich von Pyrit lagen, wobei der pH der Erzfluide durch die Paragenese Serizit+Alkalifeldspat+Quarz+Calcit gepuffert wurde. K-Ar Altersbestimmungen wurden am porphyrischen Granit, an Biotit-Phänokristallen und an hydrothermal gebildetem Biotit der Cu-Mo Skarne durchgeführt. Sie ergaben Alter von 42.5–34.6, 52.3 bzw. 39.2-26.4 Ma.Die Cu-Mo Vererzung von Machangqing zeigt eine räumliche und zeitliche Assoziation mit dem sauren Magmatismus der Magnetit-Serie im Himalaya.

---

---

With 12 Figures     

Recursive evaluation of interaction forces of unbounded soil in the time domain from dynamic-stiffness coefficients in the frequency domain

The interaction forces of the linear unbounded soil in a non-linear soil-structure-interaction analysis can be calculated recursively, starting directly from the dynamic-stiffness coefficients in the frequency domain. Two possibilities of choosing a recursive equation are discussed.

• (i) The recursive equation in the frequency domain. For each frequency, the interaction force at a specific time station is expressed as a function of the corresponding interaction force at the previous time station and of the displacements at the current time station and at the two most recent past time stations. This recursive evaluation of the convolution integral. which can be derived using the z-transformation, is rigorous. By using interpolation in the frequency domain, an approximate procedure results, which leads to a significant reduction in computational effort.
• (ii) The recursive equation in the time domain. By approximating the dynamic-stiffness coefficients as the ratios of two polynomials in frequency using a curve-fitting technique based on the least-squares method and by applying the partial-fraction expansion and using the z-transformation, the recursive coefficients can be determined explicitly. Alternatively, the ratio of two polynomials can also be transformed to an ordinary differential equation together with the initial conditions.

The recursive equations using interpolation in the frequency domain and based on a ratio of two polynomials lead to a reduction in the computational effort of one and up to three orders of magnitude, respectively.     

Clearcutting and pine planting effects on nutrient concentrations and export in two mixed use headwater streams: Upper Coastal Plain,Southeastern USA

Timber harvest temporarily increases water yield; however, relationships between hydrologic and nutrient chemistry changes have not been consistent. This study quantified the effects of forest harvesting and site preparation without fertilization and with modern best management practices on nutrient concentrations and yields in small headwater streams of the Southeastern Coastal Plain. We monitored two watershed pairs for 2 years prior to and 1 year following timber harvest and for 2 more years following site preparation and planting. Treatment watersheds were clearcut, and downstream portions of streamside management zones were thinned in Fall 2003. Site preparation (herbicide application and burning) and planting followed a year later. All operations followed 1999 Georgia forestry best management practices. Previously published research revealed a large increase in water yield following harvest. Nutrient concentrations varied significantly within and between monitoring periods, even in reference watersheds. Silvicultural activities had no discernible effect on phosphorus and ammonium concentrations; however, statistically significant increases in nitrate/nitrite (67–340 µg L⁻¹) and total nitrogen concentrations (100–400 µg L⁻¹) in treatment watersheds followed stand re‐establishment. Nutrient yields increased after timber harvest largely as a result of increased water yields, although increased nutrient yields were small relative to inter‐annual and inter‐watershed variability and variability. Annual water yield largely explained the variability in annual nitrogen and phosphorus export from reference and treatment streams (r² values from 0.65 to 0.98). High NO_x concentrations coming from an upstream agricultural area decreased 1600–1800 µg L⁻¹ over several hundred metres in the treatment streams by dilution, uptake or denitrification. Copyright © 2013 John Wiley & Sons, Ltd.