Contributions of multiple climate hazards and overgrazing to the 2009/2010 winter disaster in Mongolia

Mongolian pastoral husbandry is subject to various climate hazards such as dzud (Mongolian for “severe winter conditions”). Dzud in the 2009/2010 winter affected 80.9% of the country and killed more than 10 million livestock (23.4% of the total). To understand the natural and man-made mechanisms of this dzud, we examined the contributions of dzud-causing factors such as climate hazards (cold temperatures and heavy snow) and winter–spring livestock grazing (measured as overgrazing rate), which created a distinct regional pattern of high livestock mortality using a regression tree method. The regression tree model accounted for 58% of the total spatial variation of the mortality and identified various types of dzud in each region. Results showed that during the 2009/2010 winter, almost all of Mongolia experienced extreme cold temperatures, with abnormally large amounts of snow. In addition, more than half of the territory was overgrazed because of the lower pasture biomass resulting from summer drought and livestock overpopulation. At the regional scale, high livestock mortalities occurred in moderately to heavily overgrazed regions in south-central and western Mongolia, resulting from the combination of these factors. Conversely, areas with lower livestock mortalities (or non-dzud) coincided with sufficient pasture capacity in the north and east, even under extreme cold and snow. This indicates the importance of controlling the number of livestock to below the pasture carrying capacity regardless of an inter-annually varying climate. Moreover, we identified critical thresholds of each factor across which serious disasters occurred. These thresholds are practically useful for future livestock management of pasture land.     

Characteristics of ChgH-GFP transgenic medaka lines, an in vivo estrogenic compound detection system

We previously reported the characteristics of a ChgH-GFP transgenic medaka line that indicates estrogenic compound pollution in environmental water by the green fluorescence of their liver. Recently, we established four more lines. In this study, the characteristics of the five transgenic medaka lines were investigated. The intensity of reporter gene expression varied among transgenic lines and generally correlated well with the amount of integrated transgene in each line. Line-specific ectopic expression was also observed. However, the sensitivity to 17-beta estradiol did not differ among transgenic lines. Three transgenic lines are considered to be suitable as bio-indicators of estrogenic activity, due to the ease of observing green fluorescence in their livers. The transgenic lines can also detect the estrogenic activity of testosterone and 17-beta trenbolone at the nominal concentration of 30 and 100 microg/l, respectively.     

Optimum delay interval design in delay blasting

The major concern of this research is the reduction of blast vibrations at certain points of foremost importance. A procedure for optimum delay interval design, considering detonation time errors of the electric detonators, was proposed. Using the relationship between the peak particle velocity (PPV) and the delay at certain points of interest which was calculated by means of a computer program by simulating the superposition of the vibration waves emitted from each borehole, one can usually select the optimal delay interval in order to minimize the PPV. But due to the variations in the actual delay caused by the detonation time errors, the expected PPV usually not only depends on the nominal delay but also on the sensitivity of the PPV. Therefore, the selection of the optimum time interval for a delay blast should be based on both the optimum as well as several sub-optimal time intervals as candidates. In addition, the detonation time errors should be taken into consideration. Also, a new design concept, called 'combined delay blasting', which uses electronic detonators, is proposed to further reduce the PPV at the points of interest. Estimated vibration time histories based on this concept and their PPVs indicated considerably favorable results.     

Improving the performance of conventional base isolation systems by an external variable negative stiffness device under near-fault and long-period ground motions

Recent studies have shown that base-isolated objects with long fundamental natural periods are highly influenced by long-period earthquakes. These long-period waves result in large displacements for isolators, possibly leading to exceedance of the allowable displacement limits. Conventional isolation systems, in general, fail to resist such large displacements. This has prompted the need to modify conventional base isolation systems. The current work focuses on the development of an external device, comprising a unit of negative and positive springs, for improving the performance of conventional base isolation systems. This unit accelerates the change in the stiffness of the isolation system where the stiffness of the positive spring varies linearly in terms of the displacement response of the isolated objects. The target objects of the present study are small structures such as computer servers, sensitive instruments and machinery. Numerical studies show that the increase in the damping of the system and the slope of the linear function is effective in reducing the displacement response. An optimal range of damping values and slope, satisfying the stability condition and the allowable limits of both displacement and acceleration responses when the system is subjected to near-fault and long-period ground motions simultaneously, is proposed.

     

Magnetotelluric survey for exploration of a volcanic-rock reservoir in the Yurihara oil and gas field,Japan*

The Yurihara oil and gas field is located on the southern edge of Akita Prefecture, northeastern Japan. In this area, drilling, surface geological surveys and many seismic surveys have been used to investigate the geological structure. Wells drilled into the Nishikurosawa Basalt Group (NBG) of Miocene age found oil and gas reservoirs at depths of 1.5–2 km. Oil and gas are now being produced commercially and further exploration is required in the surrounding areas. However, since the neighbouring areas are covered with young volcanic products from the Chokai volcano, and have a rough topography, the subsurface distribution of the NBG must be investigated using other methods in addition to seismic reflection. According to the well data, the resistivity of the NBG is comparatively higher than that of the overlying sedimentary formations, and therefore the magnetotelluric (MT) method is expected to be useful for the estimation of the distribution of the NBG. An MT survey was conducted along three survey lines in this area. Each line trended east–west, perpendicular to the regional geological strike, and was composed of about 25 measurement sites. Induction vectors evaluated from the magnetic field show that this area has a two-dimensional structure. The evaluated resistivity sections are in agreement with the log data. In conclusion, we were able to detect resistive layers (the NBG) below conductive layers. The results indicate that the NBG becomes gradually less resistive from north to south. In the centre of the northern line, an uplifted resistive area is interpreted as corresponding to the reservoir. By comparison with a seismic section, we prove the effectiveness of the integration of seismic and MT surveys for the investigation of the morphology and internal structure of the NBG. On other survey lines, the resistive uplifted zones are interpreted as possible prospective areas.     

A Study on the Mineralization of the Woxi Au–Sb–W Deposit,Western Hunan,China

The Woxi Au–Sb–W deposit in the western Hunan Province, China, is of hydrothermal vein type characterized by a rare mineral assemblage of stibnite, scheelite and native gold, of which gold fineness ranges from 998.6 to 1000. The mineralization sequence observed in the deposit is, from early to late, coarse‐grained pyrite – scheelite – stibnite – Pb–Sb–S minerals – sphalerite (+ cubanite) – fine‐grained pyrite. Native gold may have precipitated with scheelte. Microthermometric and LA–ICP–MS analyses of fluid inclusions in scheelite, quartz associated with scheelite and stibnite and barren quartz clarified that there may be at least three types of hydrothermal fluids during the vein formation in the Woxi deposit. Scheelite and native gold precipitated from the fluid of high temperature and salinity with high concentrations of metal elements, followed by stibnite precipitation. The later fluid of the highest temperature and salinity with low concentrations of the elements yielded the sphalerite mineralization. The latest fluid of low temperature and salinity with low concentrations of the elements is observed mainly in barren quartz. The remarkably high Au/Ag concentration ratios determined in the fluid inclusions in scheelite might be the reason for the extremely high gold fineness of native gold.     

Species composition and forest structure in tropical moist deciduous forest of Bangladesh—a case study in Thakurgaon

This study was conducted in the tropical moist deciduous forest in Bangladesh to describe the species composition, diversity, and the forest structure. There were three plots established in Ranishonkoil, Ruhia, and Baliadangi forest beat in Thakurgaon. A total of 126 tree species, 1,991 stems (663 ha^?1) of ≥10-cm girth were listed. Tree communities in these forest region differed in dominance, composition, diversity, and structure; and tree stand density varied from 651 to 685 ha^?1. Species diversity (H¹) ranges from 3.11 to 3.48. Meliaceae, Myrtaceae, and Rubiaceae were the most abundant families within the three plot area. Study site 2 is more diverse at spatial scale and taxonomic levels due to high rainfall and favorable edaphic condition. This study will help the foresters as baseline information for monitoring and sustaining diversity of tropical moist deciduous forests in Bangladesh.     

Development of an automatic volcanic ash sampling apparatus for active volcanoes

We develop an automatic system for the sampling of ash fall particles, to be used for continuous monitoring of magma ascent and eruptive dynamics at active volcanoes. The system consists of a sampling apparatus and cameras to monitor surface phenomena during eruptions. The Sampling Apparatus for Time Series Unmanned Monitoring of Ash (SATSUMA-I and SATSUMA-II) is less than 10 kg in weight and works automatically for more than a month with a 10-kg lead battery to obtain a total of 30 to 36 samples in one cycle of operation. The time range covered in one cycle varies from less than an hour to several months, depending on the aims of observation, allowing researchers to target minute-scale fluctuations in a single eruptive event, as well as daily to weekly trends in persistent volcanic activity. The latest version, SATSUMA-II, also enables control of sampling parameters remotely by e-mail commands. Durability of the apparatus is high: our prototypes worked for several months, in rainy and typhoon seasons, at windy and humid locations, and under strong sunlight. We have been successful in collecting ash samples emitted from Showa crater almost everyday for more than 4 years (2008–2012) at Sakurajima volcano in southwest Japan.