Tectonique transpressive en terre Adélie au Paléoprotérozoı̈que (Est Antarctique)Palaeoproterozoic transpression in Terre Adélie (East Antarctica)

The Palaeoproterozoic units of Terre Adélie show two types of structural domains associated with HT–LP metamorphic conditions: domes and NS–N340° striking vertical shear zones. Shear zones reflect dextral transpressive motions. Domes reflect sub-vertical shortening and principal stretching subparallel to shear zones. They could partly result from longitudinal flow coeval with transpression. Deformations are comparable to those described along the eastern and western boundaries of the Archean Gawler Craton (South-East Australia), which underlines the continuity between these two areas before opening of the Austral Ocean. To cite this article: A. Pelletier et al., C. R. Geoscience 334 (2002) 505–511.     

Parameter identification for lined tunnels in a viscoplastic medium

This paper is dedicated to the identification of constitutive parameters of elasto‐viscoplastic constitutive law from measurements performed on deep underground cavities (typically tunnels). This inverse problem is solved by the minimization of a cost functional of least‐squares type. The exact gradient is computed by the direct differentiation method and the descent is done using the Levenberg–Marquardt algorithm. The method is presented for lined or unlined structures and is applied for an elastoviscoplastic constitutive law of the Perzyna class. Several identification problems are presented in one and two dimensions for different tunnel geometries. The used measurements have been obtained by a preliminary numerical simulation and perturbed with a white noise. The identified responses match the measurements. We also discuss the usage of the sensitivity analysis of the system, provided by the direct differentiation method, for the optimization of in situ monitoring. The sensitivity distribution in space and time assess the location of the measurements points as well as the time of observation needed for reliable identification. Copyright © 2002 John Wiley & Sons, Ltd.     

Cenozoic stratigraphy and subsidence history of the South China Sea margin in the Taiwan region

Seismic reflection profiles and well data are used to determine the Cenozoic stratigraphic and tectonic development of the northern margin of the South China Sea. In the Taiwan region, this margin evolved from a Palaeogene rift to a latest Miocene–Recent foreland basin. This evolution is related to the opening of the South China Sea and its subsequent partial closure by the Taiwan orogeny. Seismic data, together with the subsidence analysis of deep wells, show that during rifting (～58–37 Ma), lithospheric extension occurred simultaneously in discrete rift belts. These belts form a >200 km wide rift zone and are associated with a stretching factor, β, in the range ～1.4–1.6. By ～37 Ma, the focus of rifting shifted to the present‐day continent–ocean boundary off southern Taiwan, which led to continental rupture and initial seafloor spreading of the South China Sea at ～30 Ma. Intense rifting during the rift–drift transition (～37–30 Ma) may have induced a transient, small‐scale mantle convection beneath the rift. The coeval crustal uplift (Oligocene uplift) of the previously rifted margin, which led to erosion and development of the breakup unconformity, was most likely caused by the induced convection. Oligocene uplift was followed by rapid, early post‐breakup subsidence (～30–18 Ma) possibly as the inferred induced convection abated following initial seafloor spreading. Rapid subsidence of the inner margin is interpreted as thermally controlled subsidence, whereas rapid subsidence in the outer shelf of the outer margin was accompanied by fault activity during the interval ～30–21 Ma. This extension in the outer margin (β～1.5) is manifested in the Tainan Basin, which formed on top of the deeply eroded Mesozoic basement. During the interval ～21–12.5 Ma, the entire margin experienced broad thermal subsidence. It was not until ～12.5 Ma that rifting resumed, being especially active in the Tainan Basin (β～1.1). Rifting ceased at ～6.5 Ma due to the orogeny caused by the overthrusting of the Luzon volcanic arc. The Taiwan orogeny created a foreland basin by loading and flexing the underlying rifted margin. The foreland flexure inherited the mechanical and thermal properties of the underlying rifted margin, thereby dividing the basin into north and south segments. The north segment developed on a lithosphere where the major rift/thermal event occurred ～58–30 Ma, and this segment shows minor normal faulting related to lithospheric flexure. In contrast, the south segment developed on a lithosphere, which experienced two more recent rift/thermal events during ～30–21 and ～12.5–6.5 Ma. The basal foreland surface of the south segment is highly faulted, especially along the previous northern rifted flank, thereby creating a deeper foreland flexure that trends obliquely to the strike of the orogen.     

Wind erosion from military training lands in the Mojave Desert, California, U.S.A.

Military training activities reduce vegetation cover, disturb crusts, and degrade soil aggregates, making the land more vulnerable to wind erosion. The objective of this study was to quantify wind erosion rates for typical conditions at the Marine Corps Air Ground Combat Center, Twentynine Palms, CA, U.S.A. Five Big Spring Number Eight (BSNE) sampler stations were installed at each of five sites. Each BSNE station consisted of five BSNE samplers with the lowest sampler at 0·05 m and the highest sampler at 1·0 m above the soil surface. Once a month, sediment was collected from the samplers for analysis. Occurrence of saltating soil aggregates was recorded every hour using Sensits, one at each site. The site with the most erosion had a sediment discharge of 311 kg m⁻¹ over a period of 17 months. Other sites eroded much less because of significant rock cover or the presence of a crust. Hourly sediment discharge was estimated combining hourly Sensit count and monthly sediment discharge measured using BSNE samplers. More simultaneously measured data are needed to better characterize the relationship between these two and reconstruct a detailed time-series of wind erosion. This measured time-series can then be used for comparison with simulation results from process-based wind erosion models such as the Wind Erosion Prediction System (WEPS), once it has been adapted to the unique aspects of military lands.     

含矿流体混合反应与成矿作用的动力平衡模拟研究

本文在约定热液体系中成矿元素成矿速率(成矿过程中单位时间内单位体积所合成矿元素重量的变化)的基础上。借助于物质-热-化学-成矿四重全耦合的研究思路，构建了均匀热液体系、层状热液体系、岩浆侵入热液体系下成矿元素的迁移、富集、溶解与沉淀作用数值模型。模拟结果表明；(1)硫化物(H2S)和硫酸盐(SO42-)流体的混合反应是成矿热液体系中铅、锌、铁成矿元素成矿的重要控制因素；(2)均匀介质、岩浆侵入或地质构造的存在，对成矿元素在成矿流体运移的速度、流线、温度分布和成矿元素的溶解与沉淀分布都有着各自的特征．不同的成矿环境或成矿背景制约了成矿元素的迁移与富集以及矿体的产出定位。暗示成矿环境及成矿速率对热液体系中成矿元素的沉淀与溶解具重要作用；成矿流体的混合反应是成矿作用发生的重要机制之一。在成矿理论研究中必须充分考虑不同地质构造因素的约束。     

长江河源区的河水主要元素与Sr同位素来源

长江源区河水化学成分来自雨雪、蒸发盐岩、碳酸盐岩和硅酸盐岩。主要支流楚玛尔河、北麓河的主要阳离子为Na 、Ca2 和Mg2 ,占阳离子总量的97%以上.Ca Na,Mg Na,K Na的比值较低,87Sr 86Sr为0 709180±20～0 710280±11,河水成分以蒸发岩类溶解为主。发源于唐古拉山北坡的长江源头,及其支流主要阳离子为Ca2 ,Mg2 ,Na 占阳离子总量的97%以上,Ca Na,Mg Na,K Na的比值较楚玛尔河等河流高,87Sr 86Sr为0 708954±20～0 710455±18,表现为以碳酸盐岩和硅酸盐岩的溶解为主。计算表明,长江河源区河水中主要化学成分来自蒸发岩中Na 和Cl-,在河流水化学成分中占比例最大,长江河水中Cl-含量从河源区向下游明显逐渐减小,反应出河源区高寒干旱环境下河流蒸发岩的化学侵蚀作用较强的特征。     

DEVELOPMENT OF A DECISION SUPPORT SYSTEM FOR MANAGING PESTICIDE LOSSES IN AGRICULTURAL WATERSHEDS

1 INTRODUCTION Agricultural use of pesticides has been recognized as one of the important non-point pollution sources in the world, and the pesticide application to agricultural lands has led to large amounts of residues discharged into surface water through runoff (Leonard, 1990). There have been growing concerns about the fate and transport of pesticides in agricultural lands, due to the associated adverse impacts on water environment and human health (Agassi et al., 1995; Ng and Clegg…     

Borehole Breakouts in Berea Sandstone Reveal a New Fracture Mechanism

— Vertical drilling experiments in high-porosity (22% and 25%) Berea sandstone subjected to critical true triaxial far-field stresses, in which σ _H (maximum horizontal stress) >σ _v (vertical stress) >σ _h (least horizontal stress), revealed a new and non-dilatant failure mechanism that results in thin and very long tabular borehole breakouts that have the appearance of fractures, and which counterintuitively develop orthogonally to σ _H . These breakouts are fundamentally different from those induced in crystalline rocks, as well as limestones and medium-porosity Berea sandstone. Breakouts in these rocks are typically dog-eared in shape, a result of dilatant multi-cracking tangential to the hole and subparallel to the maximum far-field horizontal stress σ _H , followed by progressive buckling and shearing of detached rock flakes created by the cracks. In the high-porosity sandstone a narrow layer of grains compacted normal to σ _H is observed just ahead of the breakout tip. This layer is nearly identical to “compaction bands” observed in the field. It is suggested that when a critical tangential stress concentration is reached along the σ _h spring line at the borehole wall, grain bonding breaks down and a compaction band is formed normal to σ _H . Debonded loose grains are expelled into the borehole, assisted by the circulating drilling fluid. As the breakout tip advances, the stress concentration ahead of it persists or may even increase, extending the compaction band, which in turn leads to breakout lengthening.