Application of integrated methods in mapping waste disposal areas

An integrated suite of environmental methods was used to characterize the hydrogeological, geological and tectonic regime of the largest waste disposal landfill of Crete Island, the Fodele municipal solid waste site (MSW), to determine the geometry of the landfill (depth and spatial extent of electrically conductive anomalies), to define the anisotropy caused by bedrock fabric fractures and to locate potential zones of electrically conductive contamination. A combination of geophysical methods and chemical analysis was implemented for the characterization and management of the landfill. Five different types of geophysical surveys were performed: (1) 2D electrical resistance tomography (ERT), (2) electromagnetic measurements using very low frequencies (VLF), (3) electromagnetic conductivity (EM31), (4) seismic refraction measurements (SR), and (5) ambient noise measurements (HVSR). The above geophysical methods were used with the aim of studying the subsurface properties of the landfill and to define the exact geometrical characteristics of the site under investigation.     

Aquifer development planning to supply a seaside resort: a case study in Goa,India

Using the hydrogeological and socio-economic data derived from a European Commission research project on the measurement, monitoring and sustainability of the coastal environment, two optimization models have been applied to satisfy the future water resources needs of the coastal zone of Bardez in Goa, India. The number of tourists visiting Goa since the 1970s has risen considerably, and roughly a third of them go to Bardez taluka, prompting growth in the tourist-related infrastructure in the region. The optimization models are non-linear mixed integer models that have been solved using GAMS/DICOPT++ commercial software. Optimization models were used, firstly, to indicate the most suitable zones for building seaside resorts and wells to supply the tourist industry with an adequate amount of water, and secondly, to indicate the best location for wells to adequately supply pre-existing hotels. The models presented will help to define the optimal locations for the wells and the hydraulic infrastructures needed to satisfy demand at minimum cost, taking into account environmental constraints such as the risk of saline intrusion.

---

Résumé A l’aide de données hydrogéologiques et socio-économiques, dérivées d’un projet de recherche de la Commission Européenne sur l’étude, la surveillance et la durabilité de l’environnement c?tier, deux modèles d’optimisation ont été appliqués en vue de satisfaire les besoins futurs en ressources en eau de la zone c?tière de Bardez au Goa en Inde. Le nombre de touristes qui visitent le Goa depuis les années 70 a considérablement augmenté et environ un tiers d’entre eux se rend à Bardez taluka, ce qui encourage la croissance des infrastructures liées au tourisme dans la région. Les modèles d’optimisation sont des modèles non linéaires mixtes en nombres entiers qui ont été résolus en utilisant le logiciel commercial GAMS/DICOPT++. Les modèles d’optimisation ont été utilisés pour indiquer premièrement les zones les plus appropriées pour construire des stations balnéaires et des puits pour approvisionner en quantité d’eau suffisante l’industrie touristique, et deuxièmement pour indiquer la meilleure localisation de puits pour l’alimentation des h?tels préexistants. Les modèles présentés aideront à définir les localisations optimales des puits et des infrastructures hydrauliques nécessaires à la satisfaction de la demande à un co?t minimum, tout en prenant en compte les contraintes environnementales, tel que le risque d’intrusion saline.

---

Resumen Se han aplicado dos modelos de optimización en base a datos socio-económicos e hidrogeológicos derivados de un proyecto de investigación de la Comisión Europea sobre medición, monitoreo y sostenibilidad del ambiente costero para satisfacer las necesidades futuras de recursos hídricos de la zona costera de Bardez en Goa, India. El número de turistas que visita Goa desde la década de 1970′s ha subido considerablemente y cerca de un tercio de ellos van a Bardez taluka impulsando el crecimiento en la infraestructura turística de la región. Los modelos de optimización son modelos de números enteros mixtos no-lineales que se han resuelto usando el programa comercial GAMS/DICOPT++. Los modelos de optimización se usaron, primero para indicar las zonas más adecuadas para la construcción de centros de diversión en las márgenes del océano y pozos para abastecer la industria turística con una adecuada cantidad de agua, y segundo, para indicar la mejor localización de pozos para el abastecimiento de hoteles pre-existentes. Los modelos que se presentan ayudarán a definir las localizaciones óptimas para los pozos y las infraestructuras hidráulicas necesarias para satisfacer la demanda al mínimo costo, tomando en consideración restricciones ambientales tal como el riesgo de intrusión salina.

     

Investigation of waste disposal areas using electrical methods: a case study from Chania,Crete, Greece

A geophysical investigation of a landfill area was conducted as inextricable phase of a preliminary geotechnical, geological and hydrogeological study of the area under investigation. Electrical resistivity tomography (ERT), one of the most promising prospecting techniques mainly concerning its effective contribution to resolve several environmental problems, was applied for the geophysical modeling. ERT is a robust imaging method the theory and implementation of which are well documented in geophysical research literature. The survey site is located in Akrotirion Peninsula, about 7 km east of Chania city in Crete I. The geological setting comprises Trypalion limestones, marly limestones and a clayed weathered layer. Cavities are also identified at various scales which are recent tectono-karstic voids. Due to the above-mentioned geological singularity and in the light of the requirement for an environmentally safe construction of the landfill, an ERT survey was carried out. Specifically, seven geoelectrical tomographies were conducted reaching the prospecting depth of 36 m. The resulted images conduced, to overcome geotechnical problems since the spatial distribution of karstic voids was determined, to plan the future sites for waste disposal as the geological conditions were studied in detail and to reliably estimate the thickness of the already deposited wastes. The resulted images were confirmed using available borehole logs and ambient noise measurements.     

Analysis of Physical and Chemical Parameters for Discrimination of Water Origin in a Hydroelectric Reservoir

Seventeen physical and chemical parameters were obtained from a hydroelectric reservoir located in a tropical region in the south of Brazil. Multivariate Principal Component Analysis (PCA) and Hierarchical Group Analysis (HGA) were used to identify the parameters discriminating the origin of water from the Tibagi and the Primeiro de Maio River, after it has passed the mixing region. The study was conducted during the dry and rainy seasons in July 2002 and February 2003 at three depths and three sampling sites located 0, 5, and 10 km away from the mixing region. The statistical methods showed to be appropriate for identifying the contribution of each tributary in the water mixing site of a complex water system. The most important discriminating parameter was the absorbance relation A(253 nm)/A(203 nm), followed by the concentrations of Fe(III), Mn(III), and Ni(II). An anthropogenic interference was found in the reservoir due to high Ni(II) and orthophosphate concentrations caused by a nearby town sewage discharge. The interference was more important during the dry periods due to the lower dispersion of the pollutants. Urgent initiatives should be taken from the state government to build treatment stations for the wastewater of the small cities around the Capivara hydroelectric reservoir to prevent the drinking water quality from deteriorating.     

Derivation Of Refractive Index And Temperature Gradients From Optical Scintillometry To Correct Atmospherically Induced Errors For Highly Precise Geodetic Measurements

Refraction effects of optical beams are generally caused by an inhomogeneous propagation medium and are a major source of systematic errors in the precise optical determination of angles and distances in the atmospheric surface layer. In this contribution a method for deriving vertical temperature and refractive index gradients from optical scintillation is presented. Knowledge of these gradients is required for the compensation of atmospherically induced errors for highly precise terrestrial geodetic measurements, like direct transfer and levelling. The advantage of the present optical method is, that temperature and refractive index gradients can be derived as line-averaged values over the propagation path, which is not possible by meteorological point measurements. Field observations have been carried out with a displaced-beam scintillometer over flat terrain and under different atmospheric conditions in order to verify this method. The experiments show, that this method allows to derive accurate correction values for precise terrestrial geodetic measurements.     

Emplacement at granulite facies conditions of the Sesia–Lanzo metagabbros: an early record of Permian rifting?

The evolution of the pre-Alpine Corio and Monastero metagabbros points to strong chemical and mineralogical similarities with that of other Permian gabbro bodies of the Alps, which are concentrated in the Southalpine and Austroalpine domains. The structural and metamorphic pre-Alpine evolution of these gabbros records a re-equilibration following the emplacement in the deep crust (P=0.6–0.9 GPa and T=850±70 °C), exhumation through amphibolite facies conditions (P=0.5–0.35 GPa and T=570–670 °C), followed by a greenschist facies imprint (0.25≤P≤0.35 GPa and T<550 °C). This retrograde P–T evolution suggests that the exhumation occurred in a high thermal gradient regime, such as that induced by upwelling of an asthenospheric plume during continental rifting. This would be consistent with the crustal thinning known to have occurred in both the Southalpine and Austroalpine domains during Permian times. The gabbros and their country acid granulites are spatially associated with the serpentinised subcontinental mantle of the Lanzo Massif. This lithologic association and the metamorphic evolution is similar to that of the Fedoz gabbro (Austroalpine Domain of the Central Alps) and completely different from that observed in passive margins, where no remnants of the lower crust occur and the upper granitic crust directly overlies the serpentinized lherzolites. The location of Permian gabbro bodies in the Austroalpine and Southalpine domains and their absence in the Helvetic domain is evidence for asymmetric rifting.     

Late Cretaceous planktonic foraminifera from Kerguelen Plateau (ODP Leg 183): new data to improve the Southern Ocean biozonation

An almost complete Upper Cretaceous sedimentary sequence recently recovered on the Kerguelen Plateau (southern Indian Ocean) during ODP Leg 183 was analysed for planktonic foraminifera in order to refine and integrate the zonal schemes previously proposed for the Southern Ocean area. Detailed biostratigraphic analysis carried out on holes 1135A, 1136A and 1138A (poleward of 50°S palaeolatitude during Late Cretaceous time) has allowed recognition of low and mid–high latitude bioevents, useful for correlation across latitudes, in addition to known Austral bioevents. The low latitude biozonation can be applied to Turonian sediments, because of the occurrence of Helvetoglobotruncana helvetica, which marks the boundary between Whiteinella archaeocretacea and Helvetoglobotruncana helvetica zones. The base of the Whiteinella archeocretacea Zone falls within the uppermost Cenomanian–Turonian black shale level in Hole 1138A. The stratigraphic interval from upper Turonian to uppermost Santonian can be resolved using bioevents recognized in the mid–high latitude sections. They are, in stratigraphic order: the last occurrence of Falsotruncana maslakovae in the Coniacian, the first occurrence of Heterohelix papula at the Coniacian/Santonian boundary, the extinction of the marginotruncanids in the late Santonian, and the first occurrence of Globigerinelloides impensus in the latest (?) Santonian. The remainder of the Late Cretaceous fits rather well in the Austral zonal scheme, except that Globigerinelloides impensus exhibits a stratigraphic range in agreement with its record at the mid–high latitude sections and extends further downwards than previously recorded at southern sites. Therefore, despite the poor recovery in certain intervals and the presence of several hiatuses of local and regional importance as revealed by correlation among holes, a more detailed zonal scheme has been obtained (mainly for the less resolved Turonian–Santonian interval). Remarks on some species often overlooked in literature are also provided.     

Controls on Quaternary coastal evolution of the east-northeastern coast of Brazil: roles of sea-level history, trade winds and climate

East-northeastern Brazil has a wave-dominated, micro- to meso-tidal coast, lying entirely within the southern Atlantic trade wind belt. Integration of geologic mapping, radiocarbon dating and vibracoring data shows that the Quaternary coastal evolution of this area was controlled by three major factors: (1) sea-level history; (2) trade winds; and (3) climate change.

Sea-level history. Along the east-northeastern coast of Brazil, relative sea level has fallen approximately 5 m during the last 5000 y. Correlation of this sea-level history with the evolution of beach-ridge, lagoonal and coastal plain deposits shows that: (1) sea-level rise favours the formation of barrier island—lagoonal systems and the construction of intralagoonal deltas; (2) sea-level lowering is not conductive to barrier island formation. Rather, lagoons and bays become emergent and beach-ridge plains rapidly prograde.

Trade winds. Sediment dispersal systems along the coastal zone of east-northeastern Brazil have been highly persistent since Pleistocene time, as deduced from beach-ridge orientation. This persistence results from the fact that sediment dispersal in wave-dominated settings is ultimately controlled by atmospheric circulation which, for the east-northeastern coast of Brazil is associated with the South Atlantic high-pressure cell. The remarkable stability of this cell through time, has allowed the accumulation of extensive beach-ridge plains at the longshore drift sinks located along the coast.

Climate change. Effects of Quaternary climate changes on coastal sedimentation are twofold. Climate changes may affect rainfall patterns, thus exerting an important control on coastal dune development. Along the coast of northeastern Brazil, active coastal dunes are only present in those areas in which at least four consecutive dry months occur during the year. Mapping of these areas has shown that dune development during the Holocene has been episodic, these episodes being probably controlled by variations in rainfall patterns associated with climate changes. Secondly, despite its overall stability, the position of the high-pressure cell has experienced small shifts in position during the Holocene in response to climate changes. Changes in wind direction associated with these shifts have induced modifications in the coastal dispersion system, which are recorded in the strandplains as small truncations in the beach-ridge alignments.

These results have important implications in understanding accumulation of ancient sandstone shoreline sequences.