High-resolution seafloor mapping using the DSL-120 sonar system: Quantitative assessment of sidescan and phase-bathymetry data from the Lucky Strike segment of the Mid-Atlantic Ridge

High-resolution, side-looking sonar data collected near the seafloor (100 m altitude) provide important structural and topographic information for defining the geological history and current tectonic framework of seafloor terrains. DSL-120 kHz sonar data collected in the rift valley of the Lucky Strike segment of the Mid-Atlantic Ridge near 37° N provide the ability to quantitatively assess the effective resolution limits of both the sidescan imagery and the computed phase-bathymetry of this sonar system. While the theoretical, vertical and horizontal pixel resolutions of the DSL-120 system are <1 m, statistical analysis of DSL-120 sonar data collected from the Lucky Strike segment indicates that the effective spatial resolution of features is 1–2 m for sidescan imagery and 4 m for phase-bathymetry in the seafloor terrain of the Mid-Atlantic Ridge rift valley. Comparison of multibeam bathymetry data collected at the sea-surface with deep-tow DSL-120 bathymetry indicates that depth differences are on the order of the resolution of the multibeam system (10–30 m). Much of this residual can be accounted for by navigational mismatches and the higher resolving ability of the DSL-120 data, which has a bathymetric footprint on the seafloor that is 20 times smaller than that of hull-mounted multibeam at these seafloor depths (2000 m). Comparison of DSL-120 bathymetry with itself on crossing lines indicates that residual depth values are ±20 m, with much of that variation being accounted for by navigational errors. A DSL-120 survey conducted in 1998 on the Juan de Fuca Ridge with better navigation and less complex seafloor terrain had residual depth values half those of the Lucky Strike survey. The quality of the bathymetry data varies as a function of position within the swath, with poorer data directly beneath the tow vehicle and also towards the swath edges.Variations in sidescan amplitude observed across the rift valley and on Lucky Strike Seamount correlate well with changes in seafloor roughness caused by transitions from sedimented seafloor to bare rock outcrops. Distinct changes in sonar backscatter amplitude were also observed between areas covered with hydrothermal pavement that grade into lava flows and the collapsed surface of the lava lake in the summit depression of Lucky Strike Seamount. Small features on the seafloor, including volcanic constructional features (e.g., small cones, haystacks, fissures and collapse features) and hydrothermal vent chimneys or mounds taller than 2 m and greater than 9 m² in surface area, can easily be resolved and mapped using this system. These features at Lucky Strike have been confirmed visually using the submersible Alvin, the remotely operated vehicle Jason, and the towed optical/acoustic mapping system Argo II.     

Short-Term Benthic Recolonization after Dredging in the Harbour of Ceuta, North Africa

Abstract. The benthic recovery after dredging (area: 2625 m²) was studied in a polluted and enclosed area of the harbour of Ceuta, in which the recolonization through the water column (larvae and adult bedload transport) could be limited by the lack of renewal. The benthos was sampled at two sites (control and dredged) using a van Veen grab and adopting a BACI (Before, After, Control, Impacted) approach. Five samplings were conducted after dredging (3, 15, 30, 90, 180 days). The proportion of gravel in the sediment of the dredged site increased after dredging, while the organic matter decreased. The impact on the community was estimated at species level, using both univariate and multivariate analyses. The maximum negative effect on benthic macrofauna was a reduction by 65% for species richness (15 days after dredging) and by 75% for abundance (3 days after dredging). Between 15 and 30 days after dredging, the abundance of some species such as the molluscs Parvicardium exiguum and Retusa obtusa and the polychaete Pseudomalacoceros tridentata increased considerably in the dredged site, while typical ‘opportunistic’ species such as Capitella capitata were disfavoured by the disturbance. For this small‐scale dredging, about 6 months are required for the disturbed area to re‐establish a sediment structure and a macrobenthic community similar to the undisturbed area. Small‐patch dredging operations are proposed in harbour management whenever possible, since they allow a quick re‐adjustment of the initial sediment structure and benthic communities.     

Cloning of a chub metallothionein cDNA and development of competitive RT-PCR of chub metallothionein mRNA as a potential biomarker of heavy metal exposure

Metallothionein has been assayed in a range of aquatic animal tissues as an indicator of metal exposure. We sequenced chub (Leuciscus cephalus) metallothionein cDNA which showed over 90% homology to common carp, goldfish and stone loach and 77% homology to rainbow trout sequences for metallothionein. We then used the extended primer method to develop an accurate quantitative competitive RT-PCR assay for metallothionein mRNA. RT-PCR was used to measure metallothionein mRNA in feral chub from a range of field sites, with different levels of heavy metal pollution, in the West Midlands, UK. Measurements were complemented by analysis of liver and gill metallothionein protein by capillary electrophoresis. There was no significant difference in the metallothionein protein levels between fish of different rivers and there was no evidence of elevation of mRNA at the sites of highest metal exposure. The level of metal exposure (e.g. zinc, nickel and cadmium each ranging between 15 and 28 microg/l ) at the pH (7.5-8.5) of these rivers appears insufficient to elevate hepatic or gill metallothionein in chub. A lack of elevation of hepatic metallothionein mRNA in chub exposed to zinc, copper and manganese for 24 h and 10 days in the laboratory also suggests a non-responsiveness of this species.     

An evaluation of systems for the integrated assessment of capture fisheries

Integrated fishery assessments are intended to take an integrated and wholistic view of fisheries management, to provide comprehensive systems-based evaluations of the sustainability of individual fisheries and their products. Using guidance derived from decision theory and management science, we develop 18 criteria to evaluate the likely effectiveness of nine integrated fishery assessment systems. The assessment systems do not consistently consider four key criteria: the socio-economic impacts of fisheries, the provision of food security, the local relevance of the assessment to the fishery under assessment, and the independent peer review of assessment outcomes. Other important areas of weakness include the lack of appropriate consultation processes relating to both the design of the assessment system and the outcomes of fishery assessments, and limitations in the quality of data and information used in assessments. Improvements will be needed in these areas across all the systems we evaluated if fishers, consumers, managers and other stakeholders are to be provided with consistently reliable assessment outcomes, and an assurance of the sustainability of capture fisheries.     

Paleomonsoon precipitation deduced from a sediment core from the equatorial Indian Ocean

Rapid shifts in past climate recorded in polar ice sheets have elicited various explanations relating to either thermohaline circulation changes by ice-rafting or natural greenhouse gas concentrations modulated by climatic conditions in the tropics. To compare the tropical paleoclimate record with the polar record, one must choose sediment cores from highly productive ocean regions. Necessarily, such regions reflect the wind records in the tropics, because high productivity is associated with upwelling driven by winds. Comparing tropical precipitation records with high-latitude records is, however, a more difficult task because sediments recording paleoprecipitation usually have low sedimentation rates, and offer coarser resolution relative to polar ice cores. Here, we present δ ¹⁸O data of three planktonic species of Foraminifera (a proxy for precipitation) from such a sediment core, spanning the past 35 ka for the equatorial Indian Ocean, which falls under the southwest monsoon (SWM) realm. Results show that minimum SWM precipitation occurred at the Last Glacial Maximum, with a subsequent increase at Termination IA. During the Holocene, SWM precipitation intensified uniformly up to the core top (∼2.2 ka b.p.), as revealed by generally decreasing δ ¹⁸O values. Variations in precipitation are consistent with climate changes recorded in polar ice sheets. Although the different resolutions of the two records preclude a rigorous comparison, abrupt cooling/warming events appear to be accompanied by sudden reduction/enhancement in (SWM) rainfall. Thus, mechanisms with time scales much shorter than a millennium, such as natural greenhouse warming (e.g., CH₄ concentration), controlled by emissions from the tropics, could have played a major role in high-latitude climate change.     

Effects of organic toxicants on the anoxic energy metabolism of the mussel Mytilus edulis

The anoxic rates of heat dissipation by mussels (Mytilus edulis) were enhanced after exposure to pentachlorophenol (PCP) and tributyltin (TBT), both known uncouplers of oxidative phosphorylation. The degree of metabolic activation under anoxia was dependent upon the amount of toxicant accumulated in the tissues, but the concentration-response relationship was different to that under aerobic conditions. Biochemical measurements indicated that the anaerobic metabolic pathways were significantly disturbed by PCP and TBT. There was a decline in succinate, an increase in the fumarate: succinate ratio, and an increase in the accumulation of lactate, indicating a shift from succinate to lactate anaerobic pathways. A consequence of organic toxicant exposure was a reduction in anoxic survival time of mussels.     

A polar method for obtaining wave resonating quadruplets in finite depths

A polar method for obtaining wave resonating quadruplets {K₁, K₂, K₃, K₄} in the computation of nonlinear wave–wave interaction source term of the wave model is presented with results for both deep and finite water depths. The method first determines the end radial points of the locus equation for K₂, for each set of input wave vectors (K₁, K₃) on the symmetry. The locus of K₂ (and hence K₄) is then traced in the anti-clockwise direction starting with the maximum radial point on the line of symmetry. It is shown that when k₃>k₁, the number of points on the locus varies when the orientations of the input wave vectors are changed and reduces when the difference in the magnitude of the input wave vectors is increased. A significant advantage in this method is that the angular increment on the locus for K₂ can be kept constant.