Dynamic Analysis of A Pontoon-Separated Floating Bridge Subjected to A Moving Load

1 .Introduction Since the most significant feature of a movingloadisits mobility,the interaction betweenthe ve-hicle and bridge is very complicated,which can be classified as a coupled vibration problem.There-fore ,much attention has been paid to the dyna…     

Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current

The aim of this paper is to investigate the shape and tension distribution of fishing nets in current. A numerical model is developed, based on lumped mass method to simplify the net. The motion equation is set up for each lumped mass. The Runge–Kutta–Verner fifth-order and sixth-order method is used to solve these simultaneous equations, and then the displacement and tension of each lumped mass are obtained. In order to verify the validity of the numerical method, model tests have been carried out. The results by the numerical simulation agree well with the experimental data.     

区域海洋地质数据库建设纲要

区域海洋地质数据库是中国地质调查局基础数据库的一个重要组成部分，是实现地质调查基础性与公益性战略部署的依托。根据区域海洋地质数据库建设的目标与任务，在数据结构和实施步骤等方面进行了初步研究。区域海洋地质数据库及其管理信息系统适合采取基于Web系统的三层体系结构，在数据构成上亦分为区域海洋地质调查原始资料与成果资料，其中元数据库的建设对数据库的应用非常重要，用户可以通过元数据了解数据的存在性、适宜性、有效性等，确定数据的使用方法，因此，元数据库的建设应采用国际已经普遍认可的ISO/TC211发布的ISO19115空间元数据标准。     

Variational iteration solving method for El Nio phenomenon atmospheric physics of nonlinear model

1 IntroductionThe El Ni’o atmospheric physics oscillation is anabnormal phenomenon involved in the tropical Pacificocean- atmosphere interactions. Studies on the El Ni(ophenomenon are very attractive (Lin et al., 2000; Linet al., 2001, 2002; Wang, 2001; Feng et al., 2001;Feng et al., 2002; Liu et al., 2002; Wei and Chen,2003; Xie et al., 2002; Zhu et al., 2002; Pu et al.,2003; Gu et al., 2004; Yu and Liu, 2004). Lin and Mo(2004), Mo and Lin (2004) and Mo et al. (2004) alsostudied a s…     

Resistant performance of perforation of multi-layered targets using an estimation procedure with marine application

Recently, multi-layered targets have become commonplace in both military and civilian applications, such as marine hulls, armored vehicle bodies, outside structures of bulletproof cars, and aerospace vessels. This paper studies the resistant performance of perforation in multi-layered targets. An estimation procedure is established based on the concepts of the conservation of momentum, impulse-momentum law, and conservation of energy. Experimental results of the test of Almohandes et al. are adopted to check the residual velocity of multi-layered targets. The results of the verification are good in terms of agreement for impact velocities ranging from 700 to 800 m/s, when the ratio of the projectile length to the projectile diameter (i.e. L/D) is 4.2, and the average residual velocity error of single, double- or triple-layered targets range approximately from 4.42 to 8.40%. The ballistic performance is best for the double target when the ratio of the first layer thickness to the total thickness (i.e. t₁/(t₁+t₂)) is about 0.75, and the worse performance occurs when the ratio t₁/(t₁+t₂) is 0.5. An air gap slightly influences the resistant performance of perforation in multi-layered targets. These results may serve as a useful reference for designers.     

沉积物粒度参数的无偏估计及其在长乐海岸的应用

根据数理统计方法对粒度参数进行无偏估计,使之较以往参数估计更符合无系统误差的这一估计量的评选标准,并用这一方法对长乐东部海岸的风沙进行了系统的粒度参数分析,结果表明长乐海岸风沙沉积物的主要粒级为细沙,分选好,偏度为近对称,峰态很窄等特征,说明研究区域海岸风沙的搬运风动力主要为NE向、而且动力强度较稳定。     

好氧颗粒污泥系统快速启动试验研究

采用3组圆柱型SBR反应器进行活性污泥颗粒化培养,接种浓度分别为12 500mg.L-1,4 400mg.L-1和1 800mg.L-1。由于采用逐步缩短沉降时间这一有效措施,系统启动20d后,颗粒污泥初步形成,污泥浓度可达到6 000~8 000mg.L-1,高于普通活性污泥系统,且沉降性能良好,SVI值在50mL.g-1左右。颗粒污泥的平均粒径稳定在0.2~0.25mm。在活性污泥颗粒化的启动试验中,在生物化学条件相同的条件下,逐步缩短沉淀时间可以加快好氧污泥颗粒化系统的启动。     

A Compact Explicit Difference Scheme of High Accuracy for Extended Boussinesq Equations

Presented here is a compact explicit difference scheme of high accuracy for solving the extended Boussinesq equations.For time discretization,a three-stage explicit Runge-Kutta method with TVD property is used at predicting stage,a cubic spline function is adopted at correcting stage,which made the time discretization accuracy up to fourth order;For spatial discretization,a three-point explicit compact difference scheme with arbitrary order accuracy is employed.The extended Boussinesq equations derived by Beji and Nadaoka are solved by the proposed scheme.The numerical results agree well with the experimental data.At the same time,the comparisons of the two numerical results between the present scheme and low accuracy difference method are made,which further show the necessity of using high accuracy scheme to solve the extended Boussinesq equations.As a valid sample,the wave propagation on the rectangular step is formulated by the present scheme,the modelled results are in better agreement with the experimental data than those of Kittitanasuan.     

Wave interaction with a perforated wall breakwater with a submerged horizontal porous plate

This study examines the hydrodynamic performance of a new perforated-wall breakwater. The breakwater consists of a perforated front wall, a solid back wall and a submerged horizontal porous plate installed between them. The horizontal porous plate enhances the stability and wave-absorbing capacity of the structure. An analytical solution based on linear potential theory is developed for the interaction of water waves with the new proposed breakwater. According to the division of the structure, the whole fluid domain is divided into three sub-domains, and the velocity potential in each domain is obtained using the matched eigenfunction method. Then the reflection coefficient and the wave forces and moments on the perforated front wall and the submerged horizontal porous plate are calculated. The numerical results obtained for limiting cases are exactly the same as previous predictions for a perforated-wall breakwater with a submerged horizontal solid plate [Yip, T.L., Chwang, A.T., 2000. Perforated wall breakwater with internal horiontal plate. Journal of Engineering Mechanics ASCE 126 (5), 533–538] and a vertical wall with a submerged horizontal porous plate [Wu, J.H., Wan, Z.P., Fang, Y., 1998. Wave reflection by a vertical wall with a horizontal submerged porous plate. Ocean Engineering 25 (9), 767–779]. Numerical results show that with suitable geometric porosity of the front wall and horizontal plate, the reflection coefficient will be always rather small if the relative wave absorbing chamber width (distance between the front and back walls versus incident wavelength) exceeds a certain small value. In addition, the wave force and moment on the horizontal plate decrease significantly with the increase of the plate porosity.     

2-D TIDAL FLOW BY OPERATOR-SPLITTING METHOD

In this paper, the method of operator splitte is applied to simulate the tidal flow in the Hang-zhou Bay. Different schemes of splitting have been devised and compared.Results of the study indicate that good simulation can be achieved. Besides being simpler in form, this method is flexible and allows much freedom in selecting the mode of splitting and the scheme of computation.