Effects of Mesoscale Surface Thermal Heterogeneity on Low-Level Horizontal Wind Speeds

Using large-eddy simulation, we investigate characteristics of horizontal wind speed at 100 m above the ground, with surface heat-flux variations that are sinusoidal with amplitudes of 0, 50, and 200 W m⁻² and wavelengths of 16, 32, and 128 km, and no background flow. When the amplitude is 200 W m⁻², wind speeds induced by the surface-flux variations on scales of 16 and/or 32 km have multiple temporal oscillations from 0600 to 1800 local standard time. The positive peaks first appear before noon. In contrast, for wind speeds induced by the 128-km surface heterogeneity, a single oscillation occurs in the late afternoon, which is much larger than those generated by the 16- and 32-km surface heterogeneity. In addition, at the oscillation onset the kurtosis of the velocity increment over a distance of 1 km significantly increases, which implies intermittency in the generation of 1-km scale eddies. The spatially intermittent energy cascade generated by surface heterogeneity scaled down to 1-km eddies is analogous to the well-known intermittent energy cascade in the inertial subrange. The kurtosis of the 1-km eddies is much larger with the 128-km surface heterogeneity than with the 16- and 32-km heterogeneities. Thus we conclude that localized rapid changes of low-level horizontal wind speed may be caused by significant local surface heterogeneity on scales between a few tens and a few hundreds of kilometres.     

Experimental Measurements of Expected Mass Fraction in a Contaminant Plume

The sudden release of a quantity of gas into the atmospheric boundary layer produces a contaminant cloud. The expected mass fraction function provides a relatively simple measure of the contaminant concentration values found within the cloud and represents the ensemble-averaged fraction of the conserved release mass found at the different contaminant concentration intervals as the cloud evolves. The plume generated by a line source in grid turbulence is used to investigate the expected mass fraction function as it applies to scalar concentration values found on a typical line normal to the plume axis. Simultaneous particle image velocimetry and planar laser induced fluorescence are used to measure velocity and concentration fields, respectively. The measured expected mass fraction functions are observed to be approximately self-similar when concentration values are normalized by the centreline mean concentration. The moments of the expected mass fraction function are observed to be simply related to the centreline moments of the probability density function of scalar concentration. Arguments based on a source fluid, non-source fluid decomposition of the scalar probability density function are used to explain these observations. The results are compared with the theoretical and experimental results established for a line source of scalar in grid turbulence.     

Public policy, institutional investors and climate change: a UK case-study

Institutional investors have two important roles to play in encouraging companies to address the risks and take advantage of the opportunities presented by climate change. The first is through using their influence as shareholders to encourage companies to adopt more proactive approaches to managing the risks and opportunities presented by climate change. The second is through explicitly factoring climate change risks and opportunities into ‘mainstream’ investment analysis processes. While there is growing investor activity on the former, the integration of climate change into investment analysis remains confined to sectors where there are strong government incentives (e.g. for renewable energy) or where greenhouse gas emissions have a market price. This article reviews the evolution of UK institutional investor interest in climate change from 1990 to 2005, focusing in particular on the relative contributions of ‘soft’ policy measures such as information-disclosure and awareness raising, and ‘hard’ policy measures such as regulation and market-based instruments. The article concludes that, over this period, soft policy measures played an important role in encouraging investors to discuss climate change issues with companies, but had minimal influence on investment decisions. It was only with the introduction of hard policy measures that climate change started to be systematically factored into investment analysis. The article canvasses the implications of these findings for government efforts in the UK and elsewhere to encourage investors to play a more proactive role in the climate change debate. It also considers the role that institutional investors themselves can play in strengthening public policy measures to reduce greenhouse gas emissions.     

Robust abnormality detection methods for spatial search of radioactive materials

Radiological dirty bombs and improvised nuclear devices pose a significant threat to both public health and national security. Growing networks of radiation sensors have been deployed by a number of offices within the U.S. and international agencies. Detecting such threats while minimizing false alarm rates presents a considerable challenge to homeland security and public health. This research aims to achieve a higher probability of detection with a lower probability of false alarms. It focuses on the local spatial instability of radiation levels in order to detect radioactive materials based on robust outlier detection methods. Our approach includes a three‐step abnormality detection method consisting of one‐dimensional robust outlier detection for all gamma‐ray counts, a density‐based clustering analysis, and a two‐dimensional robust outlier detection method using a bagplot, based on spatial associations. The effectiveness of the method proposed is demonstrated through a case study, wherein radioactive materials are detected in urban environments, and its performance is compared with alternative methods employing a k‐sigma approach, local Getis–Ord () statistic, and the goodness of fit of the Poisson distribution.     

细粒酒精模型冰的弯曲强度试验研究

基于不同制冰条件和工的细粒酒精模型冰层原位悬臂弯曲强度试验,给出细料酒精模型冰弯曲强度;分析了考虑和不考虑不浮力效应对弯曲强度的差异;利用向睡向下弯曲强度结果给出该模型冰各向同性的证据;得到该冰弯曲强度与其密度、冰内未冻液含量和制冷过程可控制因子的关系,并作为定量控制模型冰质量的基础。     

Seismic performance of steel friction connections considering direct-repair costs

This study compares seismic losses considering initial construction costs and direct-repair costs for New Zealand steel moment-resisting frame buildings with friction connections and those with extended bolted-end-plate connections. A total of 12 buildings have been designed and analysed considering both connection types, two building heights (4-storey and 12-storey), and three locations around New Zealand (Auckland, Christchurch, and Wellington). It was found that buildings with friction connections required design to a higher design ductility, yet are generally stiffer due to larger beams being required to satisfy higher connection overstrength requirements. This resulted in the frames with friction connections experiencing lower interstorey drifts on most floors but similar peak total floor accelerations, and subsequently incurring lower drift-related seismic repair losses. Frames with friction connections tended to have lower expected net-present-costs within 50 years of the building being in service for shorter buildings and/or if located in regions of high seismicity. None of the frames with friction connections in Auckland showed any benefits due to the low seismicity of the region.     

Copper Isotopic Analysis in Geological and Biological Reference Materials by MC‐ICP‐MS

The characterisation of relative copper isotope amount ratios (δ⁶⁵Cu) helps constrain a variety of geochemical processes occurring in the geosphere, biosphere and hydrosphere. The accurate and precise determination of δ⁶⁵Cu in matrix reference materials is crucial in the effort to validate measurement methods. With the goal of expanding the number and variety of available geological and biological materials, we have characterised the δ⁶⁵Cu values of ten reference materials by MC‐ICP‐MS using C‐SSBIN model for mass bias correction. SGR‐1b (Green River shale), DOLT‐5 (dogfish liver), DORM‐4 (fish protein), TORT‐3 (lobster hepatopancreas), MESS‐4 (marine sediment) and PACS‐3 (marine sediment) have for the first time been characterised for δ⁶⁵Cu. Additionally, four reference materials (with published δ⁶⁵Cu values) have been characterised: BHVO‐1 (Hawaiian basalt), BIR‐1 (Icelandic basalt), W‐2a (diabase) and Seronorm? Trace Elements Serum L‐1 (human serum). The reference materials measured in this study possess complex and varied matrices with copper mass fractions ranging from 1.2 µg g^?1 to 497 µg g^?1 and δ⁶⁵Cu values ranging from ?0.20‰ to 0.52‰ with a mean expanded uncertainty of ± 0.07‰ (U, k = 2), covering much of the natural copper isotope variability observed in the environment.     

Simplified seismic performance assessment and implications for seismic design

The last decade or so has seen the development of refined performance-based earthquake engineering(PBEE) approaches that now provide a framework for estimation of a range of important decision variables,such as repair costs,repair time and number of casualties. This paper reviews current tools for PBEE,including the PACT software,and examines the possibility of extending the innovative displacement-based assessment approach as a simplified structural analysis option for performance assessment. Details of the displacement-based s+eismic assessment method are reviewed and a simple means of quickly assessing multiple hazard levels is proposed. Furthermore,proposals for a simple definition of collapse fragility and relations between equivalent single-degree-of-freedom characteristics and multi-degree-of-freedom story drift and floor acceleration demands are discussed,highlighting needs for future research. To illustrate the potential of the methodology,performance measures obtained from the simplified method are compared with those computed using the results of incremental dynamic analyses within the PEER performance-based earthquake engineering framework,applied to a benchmark building. The comparison illustrates that the simplified method could be a very effective conceptual seismic design tool. The advantages and disadvantages of the simplified approach are discussed and potential implications of advanced seismic performance assessments for conceptual seismic design are highlighted through examination of different case study scenarios including different structural configurations.     

Iron(III) accumulations in inland saline waterways,Hunter Valley,Australia: Mineralogy,micromorphology and pore-water geochemistry

Discharge of Fe(II)-rich groundwaters into surface-waters results in the accumulation of Fe(III)-minerals in salinized sand-bed waterways of the Hunter Valley, Australia. The objective of this study was to characterise the mineralogy, micromorphology and pore-water geochemistry of these Fe(III) accumulations. Pore-waters had a circumneutral pH (6.2–7.2), were sub-oxic to oxic (Eh 59–453 mV), and had dissolved Fe(II) concentrations up to 81.6 mg L⁻¹. X-ray diffraction (XRD) on natural and acid-ammonium-oxalate (AAO) extracted samples indicated a dominance of 2-line ferrihydrite in most samples, with lesser amounts of goethite, lepidocrocite, quartz, and alumino-silicate clays. The majority of Fe in the samples was bound in the AAO extractable fraction (Fe^Ox) relative to the Na-dithionite extractable fraction (Fe^Di), with generally high Fe^Ox:Fe^Di ratios (0.52–0.92). The presence of nano-crystalline 2-line ferrihydrite (Fe₅HO₃·4H₂O) with lesser amounts of goethite (α-FeOOH) was confirmed by scanning electron microscopy (SEM) coupled with energy dispersive X-ray analysis (EDX), and transmission electron microscopy (TEM) coupled with selected area electron diffraction (SAED). In addition, it was found that lepidocrocite (γ-FeOOH), which occurred as nanoparticles as little as ∼5 lattice spacings thick perpendicular to the (0 2 0) lattice plane, was also present in the studied Fe(III) deposits. Overall, the results highlight the complex variability in the crystallinity and particle-size of Fe(III)-minerals which form via oxidation of Fe(II)-rich groundwaters in sand-bed streams. This variability may be attributed to: (1) divergent precipitation conditions influencing the Fe(II) oxidation rate and the associated supply and hydrolysis of the Fe(III) ion, (2) the effect of interfering compounds, and (3) the influence of bacteria, especially Leptothrix ochracea.     

HELCOM Baltic Sea Action Plan - A regional programme of measures for the marine environment based on the Ecosystem Approach

The Helsinki Commission (HELCOM) Baltic Sea Action Plan, adopted by the coastal countries of the Baltic Sea and the European Community in November 2007, is a regional intergovernmental programme of measures for the protection and management of the marine environment explicitly based on the Ecosystem Approach. The Action Plan is structured around a set of Ecological Objectives used to define indicators and targets, including effect-based nutrient input ceilings, and to monitor implementation. The Action Plan strongly links Baltic marine environmental concerns to important socio-economic fields such as agriculture and fisheries and promotes cross-sectoral tools including marine spatial planning. Due to complementarities with the European Union (EU) Marine Strategy Framework Directive, the Action Plan is in essence a pilot for this process without neglecting the important role of the Russian Federation - the only Baltic coastal country not a member of the EU.