In situ LA-ICP-MS U–Pb titanite dating of Na–Ca metasomatism in orogenic belts: the North Pyrenean example

In the Pyrenees, in association with the rotation of the Iberian plate around Europe during the Mid-Cretaceous, a Na–Ca metasomatism is recognized as a complementary record of the hydrothermal activity that led to Na-metasomatism (albitization) and talc–chlorite mineralization. It affected metasedimentary rocks as well as Hercynian granites. In situ laser ablation ICP-MS U–Pb analyses of titanite grains formed in albitites during metasomatism date the Na–Ca metasomatism between 110 and 92 Ma. The temperature of the Na–Ca metasomatism is estimated to be approximately 550 °C. Both the time constraints and temperature estimates suggest that the Na–Ca metasomatism is related to the low-P high-T North Pyrenean metamorphism.     

Thermo-mechanical behavior of energy piles in high plasticity clays

Energy piles make use of constant and moderate ground temperature for efficient thermal control of buildings. However, this use introduces new engineering challenges because the changes of temperature in the foundation pile and ground induce additional deformations and forces in the foundation element and coupled thermo-hydro-mechanical phenomena in the soil. Several published full-scale tests investigated this aspect of energy piles and showed thermally induced deformation and forces in the foundation element. In parallel, significant progress has been made in the understanding of thermal properties of soils and on the effect of cyclic thermal load on ground and foundation behavior. However, the effect of temperature on the creep rate of energy piles has received practically no attention in the past. This paper reports the experimental results of an in situ tension thermo-mechanical test on an energy pile performed in a very stiff high plasticity clay. During the in situ test, the pile was subjected to thermal loading by circulating hot water in fitted pipes, simulating a thermal load in a cooling-dominated climate, at different levels of mechanical loading. The axial strain and temperature in the pile, and the load–displacement of the pile were monitored during the tension test at different locations along the center of the pile and at the pile head, respectively. The data showed that as the temperature increases, the observed creep rate of the energy pile in this high plasticity clay also increases, which will lead to additional time-dependent displacement of the foundation over the life time of the structure. It was also found that the use of geothermal piles causes practically insignificant thermally induced deformation and loads in the pile itself.     

The Montalet granite, Montagne Noire, France: An Early Permian syn-extensional pluton as evidenced by new U-Th-Pb data on zircon and monazite

Dating the magmatism in the Montagne Noire gneiss dome in the southern French Massif Central is a key point for understanding the Late Palaeozoic evolution of this part of the Variscan belt, which is characterised by compressive tectonics during the Carboniferous and extensional tectonics during Stephanian-Permian times. The Montalet granite crops out in the north-western part of the dome and was first considered as an early syntectonic intrusion related to compressive deformation. More recently, it has been dated at 327 Ma and considered as contemporaneous with the diapiric ascent of the Montagne Noire gneiss dome before the Stephanian-Permian extension. We show that in fact, this pluton was emplaced 294 ± 1 Ma ago and is therefore contemporaneous with the Stephanian-Permian extension. This age is consistent with the interpretation of the Montagne Noire Massif as an extensional gneiss dome.     

Pollen analyses off Senegal: Evolution of the coastal palaeoenvironment during the last deglaciation

Pollen and dinoflagellate cysts from marine sediments in core A180-48 (15°19′N, 18°06′W; 2450 m water depth; 530 cm length) are used to reconstruct palaeoenvironmental conditions of nearshore tropical west Africa during the last deglaciation. High concentrations and influxes of pollen and dinoflagellate cysts between 11 000 and 10 000 yr BP are interpreted as reflecting an increase in continental trade-wind circulation and related coastal upwelling at 15°N latitude. The sea-surface temperature difference between glacial and interglacial times was not as strong as previously suggested. Together with local (fresh) ground-water input, this smaller temperature difference may explain the persistence of the Rhizophora mangrove and Guinean gallery forests near the shore until their massive extension during the early Holocene humid maximum around 9500 yr BP. Pollen data from the core are compared with data from Rosilda N110-Z, from the continental shelf at the same latitude.     

Speciation and thermodynamic properties for cobalt chloride complexes in hydrothermal fluids at 35-440 °C and 600 bar: An in-situ XAS study

Aqueous Co(II) chloride complexes play a crucial role in cobalt transport and deposition in ore-forming hydrothermal systems, ore processing plants, and in the corrosion of special Co-bearing alloys. Reactive transport modelling of cobalt in hydrothermal fluids relies on the availability of thermodynamic properties for Co complexes over a wide range of temperature, pressure and salinity. Synchrotron X-ray absorption spectroscopy was used to determine the speciation of cobalt(II) in 0-6 m chloride solutions at temperatures between 35 and 440 °C at a constant pressure of 600 bar. Qualitative analysis of XANES spectra shows that octahedral species predominate in solution at 35 °C, while tetrahedral species become increasingly important with increasing temperature. Ab initio XANES calculations and EXAFS analyses suggest that in high temperature solutions the main species at high salinity (Cl:Co >> 2) is CoCl₄²⁻, while a lower order tetrahedral complex, most likely CoCl₂(H₂O)_2(aq), predominates at low salinity (Cl:Co ratios ∼2). EXAFS analyses further revealed the bonding distances for the octahedral Co(H₂O)₆²⁺ (^octCo-O = 2.075(19) Å), tetrahedral CoCl₄²⁻ (^tetCo-Cl = 2.252(19) Å) and tetrahedral CoCl₂(H₂O)_2(aq) (^tetCo-O = 2.038(54) Å and ^tetCo-Cl = 2.210(56) Å). An analysis of the Co(II) speciation in sodium bromide solutions shows a similar trend, with tetrahedral bromide complexes becoming predominant at higher temperature/salinity than in the chloride system. EXAFS analysis confirms that the limiting complex at high bromide concentration at high temperature is CoBr₄²⁻. Finally, XANES spectra were used to derive the thermodynamic properties for the CoCl₄²⁻ and CoCl₂(H₂O)_2(aq) complexes, enabling thermodynamic modelling of cobalt transport in hydrothermal fluids. Solubility calculations show that tetrahedral CoCl₄²⁻ is responsible for transport of cobalt in hydrothermal solutions with moderate chloride concentration (∼2 m NaCl) at temperatures of 250 °C and higher, and both cooling and dilution processes can cause deposition of cobalt from hydrothermal fluids.     

Structural inversion and its controls : examples from the Alpine foreland and the French Alps

Abstract

Positive structural inversion involves the uplift of rocks on the hanging-walls of faults, by dip slip or oblique slip movements. Controlling factors include the strike and dip of the earlier normal faults, the type of normal faults — whether they were listric or rotated blocks, the time lapsed since extension and the amount of contraction relative to extension. Steeply dipping faults are difficult to invert by dip slip movements; they form buttresses to displacement on both cover detachments and on deeper level but gently inclined basement faults. The decrease in displacement on the hanging-walls of such steep buttresses leads to the generation of layer parallel shortening, gentle to tight folds — depending on the amount of contractional displacement, back-folds and back-thrust systems, and short-cut thrust geometries — where the contractional fault slices across the footwall of the earlier normal fault to enclose a “floating horse”. However, early steeply dipping normal faults readily form oblique to strike slip inversion structures and often tramline the subsequent shortening into particular directions.

Examples are given from the strongly inverted structures of the western Alps and the weakly inverted structures of the Alpine foreland. Extensional faulting developed during the Triassic to Jurassic, during the initial opening of the central Atlantic, while the main phases of inversion date from the end Cretaceous when spreading began in the north Atlantic and there was a change of relative motion between Europe and Africa. During the mid-Tertiary well over 100 km of Alpine shortening took place; Alpine thrusts, often detached along, or close to, the basement-cover interface, stacking the late Jurassic to Cretaceous sediments of the post-extensional subsidence phase. These high level detachments were joined and breached by lower level faults in the basement which, in the external zones of the western Alps, generally reactivated and rotated the earlier east dipping half-graben bounding faults. The external massifs are essentially uplifted half-graben blocks. There was more reactivation and stacking of basement sheets in the eastern part of this external zone, where the faults had been rotated into more gentle dips above a shallower extensional detachment than on the steeper faults to the west.

There is no direct relationship between the weaker inversion of the Alpine foreland and the major orogenic contraction of the western Alps; the inversion structures of southern Britain and the Channel were separated from the Alps by a zone of rifting from late Eocene to Miocene which affected the Rhone, Bresse and Rhine regions. Though they relate to the same plate movements which formed the Alps, the weaker inversion structures must have been generated by within plate stresses, or from those emanating from the Atlantic rather than the Tethyan margin.     

Miocene to Recent exhumation of the central Himalaya determined from combined detrital zircon fission-track and U/Pb analysis of Siwalik sediments, western Nepal

Fission‐track (FT) analysis of detrital zircon from synorogenic sediment is a well‐established tool to examine the cooling and exhumation history of convergent mountain belts, but has so far not been used to determine the long‐term evolution of the central Himalaya. This study presents FT analysis of detrital zircon from 22 sandstone and modern sediment samples that were collected along three stratigraphic sections within the Miocene to Pliocene Siwalik Group, and from modern rivers, in western and central Nepal. The results provide evidence for widespread cooling in the Nepalese Himalaya at about 16.0±1.4 Ma, and continuous exhumation at a rate of about 1.4±0.2 km Myr^?1 thereafter. The ～16 Ma cooling is likely related to a combination of tectonic and erosional activity, including movement on the Main Central thrust and Southern Tibetan Detachment system, as well as emplacement of the Ramgarh thrust on Lesser Himalayan sedimentary and meta‐sedimentary units. The continuous exhumation signal following the ～16 Ma cooling event is seen in connection with ongoing tectonic uplift, river incision and erosion of lower Lesser Himalayan rocks exposed below the MCT and Higher Himalayan rocks in the hanging wall of the MCT, controlled by orographic precipitation and crustal extrusion. Provenance analysis, to distinguish between Higher Himalayan and Lesser Himalayan zircon sources, is based on double dating of individual zircons with the FT and U/Pb methods. Zircons with pre‐Himalayan FT cooling ages may be derived from either nonmetamorphic parts of the Tethyan sedimentary succession or Higher Himalayan protolith that formerly covered the Dadeldhura and Ramgarh thrust sheets, but that have been removed by erosion. Both the Higher and Lesser Himalaya appear to be sources for the zircons that record either ～16 Ma cooling or the continuous exhumation afterwards.