Swath mapping of the seafloor and its application to deep-bottom fisheries in New Caledonia

A bottom longline fishery operated in the EEZ of New Caledonia from 1988 to 1991. Fishing focused on five seamounts with summits at depths ranging from 500 to 750 m. The target species was alfonsino, Beryx splendens. As the soundings available from marine charts were not detailed enough, the fishing masters had to make their own charts in order to set the gear in the right location. A series of 11 scientific cruises devoted to a research program on alfonsino was launched in late 1991. During the first scientific cruises, several days were spent mapping the seabed to improve the existing knowledge of the topography of three seamounts by coupling the EDO echosounder depth measurements to the GPS positions. As this procedure is slow, it is applicable to limited areas or, if a wider grid is used, to large zones to locate major structures such as ridges and seamounts. The emergence of the multibeam echosounder has greatly improved seabed mapping performance. This tool seems to fit the requirement of exploratory deep-bottom fishing particularly well, as it covers large areas while providing details of the bottom. The EM 12 was used to obtain bathymetry and imagery of the SE portion of the EEZ of New Caledonia, covering an approximate area of 70,000 km² in two weeks. For depths ranging from 500 to 4,500 m, the results were impressive. They confirmed the known major features and provided greater topographical detail, revealing fine unknown structures. They also provided information on the type of substratum, information which might influence the fishing strategy. Finally, they made it possible to obtain an accurate estimate of the exploitable area which in turn led to new stock estimates.     

云南程海近500年来湖泊初始生产力的演化

程海为富营养化封闭湖泊，通过对程海CH01乳沉积物色素分析，定性恢复了近500a来程海湖泊初始生产力演化过程，结果表明，近500a来程海湖泊初始生产力总体上呈现由低到高的上升趋势，其中1700AD前后，1790AD前后是湖泊初始生产力出现变化的界限，另外，色素含量变化揭示研究时期内存在1750AD前后，1930AD前后二次明显暖波动。     

多波束数据处理中的UTM直角坐标与经纬度坐标转换技术

简要介绍了地图投影的一般概念,重点描述了UTM的优点及其与大地坐标之间的相互转换,该转换方法软件化后形成的技术可以为多波束数据后处理商业软件提供坐标转换的补丁技术。最后附上部分经实际检验的Fortran程序供参考。     

防波堤损坏特点与其成因的关系

利用日本《被灾防波堤集览》、葡萄牙锡尼斯防波堤、日本六小河原港防波堤、中国大连渔港、台湾基隆港等61件典型损坏案例及其它参考文献所涉及的140余件案例,讨论了防波堤损坏平面形态与断面部位的特征。根据防波堤损坏特点,从波浪水动力学特性、结构、地基和施工多方面分析了损坏原因与损坏特性之间的关系,从而深化对防波堤工作机理的认识。     

中国近海的蔓足类 Ⅰ.藤壶属

藤壶属(Genus Balanus)是甲壳类蔓足亚纲(Subclass Cirripedia)藤壶科(Family Balanidae)中最大的一属，它在有害海洋附着生物中是主要组成成分。许多种附着于船底、水下设施或建筑物上，致使船舰燃料消耗增加，航速减低，降低浮标浮力，缩小管道通路，侵占某些水产养殖对象的有效附着面，污损养殖架筏和绳索，加快水下金属的腐蚀等，对海防、海运交通、工业和渔业常造成一定危害，同人类的关系颇为密切。随着我国科学事业的发展，特别是附着生物防除工作的进展，对于种类的确切鉴定和生物学及生态学资料需要日益增多，只有在搞清种类的基础上，根据不同种的生物学和生态特征，采取相应的措施，才能有效地进行防除工作。 中国近海的藤壶属，国内外仅有一些零星记载，缺乏全面而系统的报告。我们早在五十年代，就注意到我国沿海常见的一些主要附着生物，特别是当时作为“布纹藤壶” Balanus Amphitrite communis Darwin(=B.reticulatus Utinomi)和“克氏藤壶”Balanus Amphitrite krügeri Nilsson-Cantell(=B.uliginosus Utinomi)描记的两个类型，无论在栖息环境、繁殖习性或幼虫形态上都有显著差异，因而怀疑它们不是一个种内的亚种，而应属于不同的种。为了解决上述和类似的问题，给生态和防除研究工作提供更为准确的基本资料，我们对藤壶亚目的种类进行了系统的研究，本文是研究报告的第一部分。根据的是中国科学院海洋研究所历年采集收藏的标本，共鉴定31种和亚种，分隶于7个亚属，其中有6新种，有9种在我国是首次记录(种名录见190页)。新种的模式标本均保存于中国科学院海洋研究所。     

裙带菜配子体基因工程选择标记的研究

研究了裙带菜(Undaria pinnatifida)配子体对除草剂草丁膦的敏感性以及温度对草丁膦处理效果的影响。结果表明,裙带菜配子体对草丁膦敏感;统计学分析得出了草丁膦在不同温度条件下处理裙带菜配子体的半致死浓度(LD50)及95%可信限;温差达到10℃时,相同处理时间各组内不同处理温度样品的LD50之间呈现显著差异,第6天的LD50由10℃组的15.78 mg/L降为20℃组的11.56 mg/L和25℃组的10.33 mg/L。研究发现可以尝试采用草丁膦作为裙带菜配子体遗传转化的选择试剂。     

健康型牛蛙饲料养殖牛蛙的试验

本研究采用5种中草药添加剂配方的膨化饲料进行了为期36d的牛蛙养殖对比试验.结果表明，饲料中添加有中草药制剂的日摄食量明显大于对照组，日增重显著比对照组的高.而且大大加快了生长速度，缩短养殖周期，同时减少了染病机率，牛蛙体色鲜艳、光泽度极佳.     

四氯化碳对杜氏盐藻的毒性实验

按等浓度对数间距0．2设置毒物四氯化碳(CCl4)浓度对杜氏盐藻进行了毒性实验，根据细胞的生长以及β-胡萝卜素含量的变化，观察CCl4,对盐藻的毒性效应。结果表明，CCl4浓度小于0．13％时对盐藻生长及β-胡萝卜素累积几乎没有影响。盐藻对CCl4的最大耐受浓度为0．20％。CCl4浓度达到0．32％时，5天之后造成细胞全部死亡和β-胡萝卜素累积消失。     

渤、黄、东海内潮的数值模拟

在全球的海洋中,中国东海和临近海域是最显著的内潮生成地之一。本文采用NODC(Levitus) World Ocean Atlas 1998提供的季平均温、盐资料,计算海水的密度,并计算垂向密度梯度的最大值点,得到一个较符合海水实际的密度分层。使用三维非线性数值模型(将海洋分为2层)研究了潮汐(M2,S2,K1,O1分潮)作用下渤黄东海的内潮,揭示了整个海区内潮起伏的空间分布,结果发现大振幅的波动均发生在台湾东北(冲绳海槽)海域和中国近海地形突变之处,其中前者更显著。对于各分潮模拟得到的表面潮与TOPEX/Poseidon高度计资料基本一致。研究结果表明上层海水的深度和厚度的梯度对内潮有一定的影响;冬季分布区域比夏季小,强度比夏季大。     

Numerical simulation of random wave slamming on structures in the splash zone

The numerical investigation of random wave slamming on superstructures of marine structures in the splash zone is presented in this paper. The impact pressures on the underside of the structure are computed based on the improved volume of fluid method (VOF). The governing equations are Reynolds time-averaged equations and the two equation k– model. The third order upwind difference scheme is applied to the convection term to reduce the effect of numerical viscosity. The numerical wave flume with random wave-maker suitable for VOF is established. Appropriate moving contact-line boundary conditions are introduced to the model wave in contact with and separated from the underside of structure. Parametric studies have been carried out for different incident waves, structure dimensions and structure clearance. The numerical results are verified by the experimental results.