An active mass damper designed using ARX models of a building structure

This study proposes a new design method for an active mass damper (AMD) that is based on auto‐regressive exogenous models of a building structure. The proposed method uses the results of system identification in the field of active structural control. The uncontrolled structure is identified as auto‐regressive exogenous models via measurements under earthquake excitation and forced vibration. These models are linked with an equation of motion for the AMD to introduce a state equation and output equation for the AMD–structure interaction system in the discrete‐time space; the equations apply modern control theories to the AMD design. In the numerical applications of a 10‐degree‐of‐freedom building structure, linear quadratic regulator control is used to understand the fundamental characteristics of the proposed design procedure. The feedback control law requires the AMD's acceleration, velocity and stroke; the structure's acceleration; and the ground acceleration as vibration measurements. The numerical examples confirm the high applicability and control effectiveness of the proposed method. One remarkable advantage of the proposed method is that an equation of motion for the structure becomes unnecessary for designing controllers. Copyright © 2016 John Wiley & Sons, Ltd.     

Uptake and biological effects of synthetic glucocorticoids in common carp (Cyprinus carpio)

Uptake and biological effects of synthetic glucocorticoids (GCs) were analyzed using common carp (Cyprinus carpio). Fish were exposed to clobetasol propionate (CP) or clobetasone butyrate (CB) individually or in mixture at 1 μg L⁻¹ for 21 days. Bioconcentration factor (BCF) of CB was calculated as 100, and BCF of CP was less than 16. No effects were found in fish erythrocyte and leukocyte numbers and serum glucose levels after exposure to the selected GCs. On the other hand, serum concentrations of free amino acids significantly increased in GC-exposed groups. Thus, exposures to synthetic GCs at relatively low concentrations seemed to cause enhancement of protein degradation and subsequent increase of serum free amino acids without a corresponding increase in serum glucose levels, an effect which might be related to partial induction of gluconeogenesis by GC.     

In situ stress measurements in a borehole close to the Nojima Fault

Abstract In situ stress was measured close to the fault associated with the 1995 Kobe Earthquake (Hyogo-ken Nanbu earthquake; January 1995; M 7.2) using the hydraulic fracturing method. The measurements were made approximately 2 years after the earthquake. The measured points were approximately 40 m from the fault plane at depths of about 1500 m. The maximum and the minimum horizontal compressive stresses were 45 MPa and 31 MPa, respectively. The maximum compressive stress and the maximum shear stress are very small in comparison with those of other seismically active areas. The azimuth of the maximum horizontal compressive stress was estimated from the observed azimuths of well bore breakouts at depths between 1400 m and 1600 m and was found to be N135° (clockwise). The maximum stress axis is perpendicular to the fault strike, N45°. These features are interpreted in terms of a small frictional coefficient of the fault. The shear stress on the fault was released and dropped almost to zero during the earthquake and it has not yet recovered. Zero shear stress on the fault plane resulted from the perpendicular orientation of one of the principal stress to the fault plane.     

Distribution of fault rocks in the fracture zone of the Nojima Fault at a depth of 1140 m: Observations from the Hirabayashi NIED drill core

Abstract Characteristics of deformation and alteration of the 1140 m deep fracture zone of the Nojima Fault are described based on mesoscopic (to the naked eye) and microscopic (by both optical and scanning electron microscopes) observations of the Hirabayashi National Research Institute for Earth Science and Disaster Prevention (NIED) drill core. Three types of fault rocks; that is, fault breccia, fault gouge and cataclasite, appear in the central part of the fault zone and two types of weakly deformed and/or altered rocks; that is, weakly deformed and altered granodiorite and altered granodiorite, are located in the outside of the central part of the fault zone (damaged zone). Cataclasite appears occasionally in the damaged zone. Six distinct, thin foliated fault gouge zones, which dip to the south-east, appear clearly in the very central part of the fracture zone. Slickenlines plunging to the north-east are observed on the surface of the newest gouge. Based on the observations of XZ thin sections, these slickenlines and the newest gouge have the same kinematics as the 1995 Hyogo-ken Nanbu earthquake (Kobe earthquake), which was dextral-reverse slip. Scanning electron microscopy observations of the freeze-dried fault gouge show that a large amount of void space is maintained locally, which might play an important role as a path for fluid migration and the existence of either heterogeneity of pore fluid pressure or strain localization.     

小江断裂带第四纪晚期左旋走滑速率及其构造意义

位于中国西南的小江 (Xiaojiang)断裂带作为康定 (Kangding)断裂带的南段 ,在青藏块体向SE方向挤出的过程中起着重要的作用。根据断错地貌以及这些断错地貌14 C年代或热释光年代 ,推算了小江断裂带第四纪晚期的左旋走滑速率。小江断裂带可以分为 3段 ,其中段由平行的两条断层组成。西支断层和东支断层的左旋走滑速率分别为 7.0～ 9.0mm/ yr和 6 .0～ 7.5mm/yr。简单相加 ,就可以推算出小江 (Xiaojiang)断裂带总的左旋走滑速率为 13 0～ 16 5mm/ yr,与康定断裂带北段的鲜水河 (Xianshuihe)断层的走滑速率大致相当 ,约等于康定 (Kangding)断裂带中段的安宁河 (Anninghe)断层及则木河 (Zemuhe)断层的两倍。这个结果可能暗示了在康定断裂带中段 ,可能存在着其他断层以解消另外一半的滑动速率。最有可能的断层是位于康定断裂带中段以东几十公里的普雄河 -布拖 (Puxionghe Butuo)断层     

Crustal structure, fault segmentation, and activity of the Median Tectonic Line in Shikoku, Japan

We conducted a seismic tomographic analysis to estimate the crustal structure beneath the Shikoku and Chugoku regions in Japan. The Philippine Sea slab (PHS slab) subducts continuously in a SE–NW direction beneath this region, and the crustal structure is complex. Furthermore, the Median Tectonic Line (MTL), one of the longest and most active arc-parallel fault systems in Japan (hereafter, the MTL active fault system), is located in this area, and the right-lateral strike–slip movement of this fault system is related to the oblique subduction of the PHS slab. The MTL active fault system has ruptured repeatedly during the last 10 000 years, and has high seismic potential. Our tomographic analysis clarified the heterogeneous crustal structure along the MTL active fault system. This fault system in Shikoku can be divided into two segments, an east segment and a west segment, on the basis of the velocity structure. This segmentation model is consistent with other such models that have been determined from geological and geomorphological data such as fault geometry, slip rate, and faulting history. This consistency suggests that the surface characteristics of the MTL active fault system are related to structural properties of the crust. In particular, a prominent low-velocity (low-V) zone is present in the lower crust beneath the east segment. Our tomographic images show that the lower crust structure beneath the east segment is obviously different from that of the other segment. Furthermore, this low-V zone may indicate the presence of fluid, possibly related to dehydration of the PHS slab. As the presence of fluid in the lower crust affects the activity of the fault, stress accumulation and the fault failure mechanism may differ between the two segments of the MTL active fault system.