Comparative inverse analysis of satellite (MODIS) and ground (PM10) observations to estimate dust emissions in East Asia

Soil dust aerosol is the largest contributor to aerosol mass concentrations in the troposphere and has considerable effects on air quality and climate. Arid and semi-arid areas of East Asia are one of the important dust source regions thus it is crucial to understand dust mobilization and accurately estimate dust emissions in East Asia. However, present dust models still contain large uncertainties with dust emissions that remain a significant contributor to the overall uncertainties in the model. In this study, we attempt to reduce these uncertainties by using an inverse modeling technique and obtain optimized dust emissions. We use Moderate Resolution Imaging Spectrometer (MODIS) aerosol optical depths (AODs) and groundbased mass concentrations of particles less than 10 μm in aerodynamic diameter (PM₁₀) observations over East Asia in May 2007. The MODIS AODs are validated with AErosol RObotic NETwork (AERONET) AODs. The inversion uses the maximum a posteriori method and the GEOS-Chem chemical transport model (CTM) as a forward model. The model error is large over dust source regions including the Gobi Desert and Mongolia. We find that inverse modeling analyses from the MODIS and PM₁₀ observations consistently result in decrease of dust emissions over Mongolia and the Gobi Desert. Whereas over the Taklamakan Desert and Manchuria, the inverse modeling analyses from both observations yield contrast results such as increase of dust sources using MODIS AODs, while decrease of those using PM₁₀ observations. We discuss some limitations of both observations to obtain the optimized dust emissions and suggest several strategies for the improvement of dust emission estimates in the model.     

Monitoring deformations on engineering structures in Kozlu Hard Coal Basin

Underground coal mining activities in Kozlu Hard Coal Basin have reached a level affecting ground layers inside the mining seams and the surface just above the mining operations, causing movements in vicinity of the basin. The movements emerge as collapsing in vertical direction and as sliding, curling and bending in horizontal direction and are termed mining subsidence since they exhibit themselves in ground layers and on earth surfaces in mining environments. These mining-induced movements cause damages and destructions on structures inside and on the surface of mining grounds, and the dimensions of these damages depend upon quality of structures and magnitude of movements. In order to contribute toward a solution to these problems and to mitigate the effects arising during and after mining activities, one should identify and investigate damage prone movements and determine the movement–time relationship. Therefore, it is immensely important to observe, investigate, and measure these movements in regions where mining activities take place. This study focuses on the surface movement-related deformations on the engineering structures in the basin such as Kozlu Seaport and some part of the Zonguldak-Kozlu Road. For this reason, subsidence monitoring points were established on the engineering structures in the basin in a geodetic network concept, and three periods of precise leveling and static GPS observations were conducted. Analyzing these two types of geodetic observations, active and residual subsidence effects were determined for both Kozlu Seaport and the Road nearby.     

Biosorption of Procion Red MX 5B by Bacillus subtilis and Its Extracellular Polysaccharide: Effect of Immobilization

Bacillus subtilis and its extracellular polysaccharide (EPS) were used in free form as well as immobilized form as biosorbent for the removal of an anionic dye Procion Red MX 5B. Low pH was favourable for biosorption. Immobilization resulted in reduced biosorption of the dye. The presence of functional groups responsible for the high adsorption capacity in free cells (FC) and EPS was confirmed by FTIR analysis. High Q_max and b values were noted in the case of FC and free EPS in contrast to immobilized cells and EPS. The kinetics data showed that the adsorption system followed pseudo‐first‐order reaction at low dye concentration. Desorption of the dye was found to be 100% in 1 N NaOH. In the case of immobilized biomass and EPS the alginate was found to be unstable under high alkaline conditions of NaOH.     

Possible northward extension of the Philippine Fault Zone offshore Luzon Island (Philippines)

The Philippine Fault Zone, a system of left-lateral strike-slip faults traversing the length of the Philippine Islands, is associated with the oblique convergence between the Philippine Sea Plate (PSP) and the Eurasian Plate (EP). Although it is a major deformational structure within the diffuse PSP–EP convergent boundary, some of its segments, particularly its marine extensions, are not well studied. To investigate the crustal deformation in the marine prolongation of the Philippine Fault Zone offshore Luzon Island, multi-channel seismic (MCS) data, gravity data and centroid moment tensor solutions were used in this study. Focal mechanism solutions from the Global CMT catalog were inverted to determine the average principal stress directions and consequently understand the prevailing stress regime in the study area. The stress inversion results indicate that the direction of maximum compression (σ1) is 321°N, which coincides with the PSP–EP convergence direction. From the MCS profiles, the study area was subdivided into deformation zone and a relatively stable zone. Thrust faulting, folding and general uplift are observed in the deformation zone. This zone is further subdivided into the active and inactive segments. In the active segment, uplift is occurring in the submarine ridge. This deformation pattern can be related to the ongoing uplift in some regions bisected by the PFZ. The inactive segment, characterized by intense folding of the sequences and faulting of the basement and overlying sequences, is suggested as the precursor of the Philippine Fault Zone. Deformation appears to be recently shifted to the east as delineated by an uplifted N-NW trending submarine ridge offshore NW Luzon Island.     

Field measurements of absolute gravity in East Antarctica

Abstract This paper reports the results of field-based absolute gravity measurements aimed at detecting gravity change and crustal displacement caused by glacial isostatic adjustment. The project was initiated within the framework of the 53rd Japanese Antarctic Research Expedition （JARE53）. Absolute gravity measurements, together with GPS measurements, were planned at several outcrops along the Prince Olav Coast and S6ya Coast of East Antarctica, including at Syowa Station. Since the icebreaker Shirase （AGB 5003） was unable to moor alongside Syowa Station, operations were somewhat restricted during JARE53. However, despite this setback, we were able to complete measurements at two sites： Syowa Station and Langhovde. The absolute gravity value at the Syowa Station IAGBN （A） site, observed using an FG-5 absolute gravimeter （serial number 210; FG-5 #210）, was 982 524 322.7＋0.1 ktGal, and the gravity change rate at the beginning of 2012 was -0.26 gGal.a-1. An absolute gravity value of 982 535 584.2~0.7 ktGal was obtained using a portable A-10 absolute gravimeter （serial number 017; A-10 #017） at the newly located site AGS01 in Langhovde.     

Comparison of the Clay Fraction of Ariake Clay Determined by Japanese and ASTM Standards

This study compares the clay fraction percentage determined by Japanese standard JIS A1204/JGS 0131 and ASTM standard D422-63 for the clay samples obtained from the surface of sea bottom sediments in Ariake Bay, Japan. These two standards differ in the amount of dispersant to be added for the dispersion of soil suspensions. The Japanese and ASTM standards suggest adding sodium hexametaphosphate solution as the dispersant so that the final concentration of the dispersant in soil suspension for hydrometer test becomes 2 and 5 g/L, respectively. The test results indicated that the treatment by the Japanese standard gave less dispersion in the soil suspension compared to the ASTM standard, and hence resulted in the underestimation of clay fraction percentage of all the samples.     

Influences of human activities and agriculture on groundwater quality of Kayseri-Incesu-Dokuzpınar springs,central Anatolian part of Turkey

Human activities and agriculture have had direct and indirect effects on the rates of contamination of groundwater in the Incesu-Dokuzp inar spring area. Direct effects include dissolution and transport of excess quantities of fertilizers with associated materials and hydrological alterations related to irrigation and drainage. Indirect effects may include changes in water–rock reactions in soils and aquifers caused by increased concentrations of dissolved oxidants, protons, and major ions. Agricultural activities have directly or indirectly affected the concentrations of a large number of inorganic chemicals in groundwater, for example NO ₃, N ₂, Cl, SO ₄ ², H ⁺, K, Mg, Ca, Fe, Cu, B, Pb, and Zn, as well as a wide variety of pesticides and other organic compounds. For reactive contaminants like NO ₃, it is recommended that a combination of hydrochemical and environmental-tracer analytical approaches might be required to resolve changing inputs from subsequent alterations as causes of concentration gradients in groundwater. The water type of Dokuzp inar springs is mainly Na–Mg–Ca–Cl–HCO ₃. Note that the water types of the springs were directly related to the hydrogeochemical properties of outcrops at the study area. Thus, the high concentration of Ca ²⁺ and HCO ₃ is mainly related to the high CO ₂ contents in the marbles, whereas the high Na concentration arises from the existing syenite, volcanic ash, basalt, and clay units, although the Incesu-Dokuzp inar springs cover most of the drinking and irrigation water demands of this area. The high concentrations of NO ₃ and NaCl show that the area around the springs is continuously being contaminated by untreated sewage and agricultural wastes, especially during dry periods. Therefore, this approach is based on the vulnerability studies of the catchment area, determination of the transfer time of the pollutant, and the water-bearing formations of Incesu-Dokuzp inar springs. Vulnerability in this study is defined as the intrinsic hydrogeochemical characteristics of an aquifer, which may show the sensitivity of groundwater to be contaminated by different human activities.     

澳门及其邻近地区海陆风的模拟

利用宾州／美国国家大气研究中心的ＭＭ５模式来模拟澳门的海陆风和珠江口的三维风场。模式设计为四重套网格,分辨率分别为 １ｋｍ,３ ｋｍ,９ ｋｍ,２７ ｋｍ。使用常规观测资料作为初始场,模拟时间为３０小时。结果表明采用高分辨率（１ｋｍ）模拟能很好地捕捉到澳门的海风和陆风。海风锋和热力内边界层也清楚可见。如果最小分辨率为３ ｋｍ,则只捕捉到海风,陆风却模拟不出来。