Balance Between Autotrophic and Heterotrophic Components and Processes in Microbenthic Communities of Sandy Sediments: A Field Study

The microscopic community of a microtidal sandy sediment on the Swedish west coast was studiedin situat two depths (0·5 and 4 m) on four occasions (January, April, August and October). Biomass of microalgae, bacteria, ciliates and meiofauna, as well as primary and bacterial productivity, were quantified. Meiofaunal grazing on algae and bacteria was measured simultaneously by radiolabelling intact sediment cores. Autotrophic biomass dominated the microbial community at both depths and on all sampling occasions, accounting for 47–87% of the microbial biomass. Meiofauna contributed 10–47%, while bacteria and ciliates together made up less than 6%. The microflora was dominated by attached (epipsammic) diatoms, but occasional ‘ blooms ’ of motile species occurred. Vital cells of planktonic diatoms contributed to benthic algal biomass in spring. Primary productivity exceeded bacterial productivity in April and August at both depths, while the balance was reversed in October and January. Meiofauna grazed between 2 and 12% of the algal biomass per day, and between 0·3 and 37% of the bacterial biomass. Almost an order of magnitude more algal (17–138 mg C m⁻²) than bacterial (0·1–33 mg C m⁻²) carbon was grazed daily. At the shallow site, primary productivity always exceeded grazing rates on algae, whereas at the deeper site, grazing exceeded primary productivity in October and January. Bacterial productivity exceeded grazing at both depths on all four occasions. Thus, meiofaunal grazing seasonally controlled microalgal, but not bacterial, biomass. These results suggest that, during summer, only a minor fraction (<10%) of the daily microbenthic primary production appears to enter the ‘ small food web ’ through meiofauna. During spring and autumn, however, a much larger fraction (≈30–60%) of primary production may pass through meiofauna. During winter, meiofaunal grazing is a less important link in the shallow zone, but at sublittoral depths, algal productivity may be limiting, and meiofauna depend on other food sources, such as bacteria and detritus.     

Rb-Sr provenance ages from weathered and stream transported quartz grains from the Harney Peak Granite,Black Hills,South Dakota

Weathered quartz grus and stream transported quartz of the Harney Peak Granite, Black Hills, South Dakota, contain low concentrations of Rb (generally 0.3–6.8 ppm) and Sr (0.2–2.0 ppm) and variable Sr isotopic ratios (0.759–1.070).Six of seven single grains of large composite quartz grus which recently entered the weathering environment define an apparent isochron age (about 1800 Myr) and initial ${}^{87}\text{Sr}{}^{86}\text{Sr}$ ratio (0.7066) that approximate the whole-rock isochron age (1707 Myr) and initial ratio (0.7143) of the Harney Peak Granite. Apparently the Rb-Sr systematics of these grains were not significantly altered during initial weathering. Leached fluid inclusion material from a ca. 2 g aggregate of composite quartz grains contains very little Rb or Sr (0.019 and 0.17 μg, respectively) and has a very low ${}^{87}\text{Sr}{}^{86}\text{Sr}$ ratio (0.739). The Rb and Sr content of the quartz grains appears to be concentrated in minute, heterogeneously-distributed mineral inclusions.Five aggregates of more completely weathered, small non-composite quartz grains produce a widely scattered pattern on an isochron diagram with all samples plotting below the 1707 Myr isochron. Examination by SEM of these grains shows solution and precipitation features on their relatively large effective surface areas. The differential precipitation of Rb is believed to have been the major perturbating chemical process during weathering.Three aggregates of stream quartz grains define an apparent isochron age of 1777 Myr and an initial ${}^{87}\text{Sr}{}^{86}\text{Sr}$ ratio of 0.720 that suggest the initial ‘igneous’ Rb-Sr characteristics of the stream quartz were re-attained during their transportation, probably as a result of removal of the outer weathered surface by abrasion. The apparent resistance to chemical weathering of stream quartz and quartz which has just entered the weathering environment suggests that this mineral may be extremely useful in studies of provenance and the geochronology of strongly weathered terranes.     

Contact and fracture ultramafic assemblages from Norway: Rb-Sr evidence for crustal contamination

Strontium isotopes are used as tracers of crustal contamination of alpine-type ultramafic rocks from the Basal Gneiss Complex of the Caledonides of southern Norway. Minerals from anhydrous assemblages that occur in the cores of these ultramafic lenses give Sr⁸⁷/Sr⁸⁶ ratios (0.7011 to 0.7047) that reflect the expected ambient Sr⁸⁷/Sr⁸⁶ conditions of the ancient upper mantle. Rb-Sr evidence for crustal contamination is found in hydrous assemblages that occur within fractures and around the margins of the ultramafio bodies. Olivine, enstatite, amphibole, and magnesite from these assemblages have present-day Sr⁸⁷/Sr⁸⁶ ratios (0.7049 to 0.7085) that are significantly higher than those of compositionally equivalent minerals from the interiors of the ultramafic bodies. The high Sr⁸⁷/Sr⁸⁶ values were acquired as a result of the reaction between the ultramafic rock and ion-charged hydrous solutions carrying strontium with the ambient Sr⁸⁷/Sr⁸⁶ ratio (around 0.713) of the enclosing country rook during the waning phases of the Caledonian Orogeny. Mineral separates from the interiors of these ultramafic bodies can yield useful information on the ancient upper mantle. Wholerock samples, however, will show some evidence of contamination from the crust as a result of the formation of at least trace amounts of secondary hydrous minerals. Most whole-rook Sr⁸⁷/Sr⁸⁶ ratios from alpine-type ultramafic rocks from other orogenic belts show evidence of this contamination.     

Seasonal Water Storage Variations as Impacted by Water Abstractions: Comparing the Output of a Global Hydrological Model with GRACE and GPS Observations

Better quantification of continental water storage variations is expected to improve our understanding of water flows, including evapotranspiration, runoff and river discharge as well as human water abstractions. For the first time, total water storage (TWS) on the land area of the globe as computed by the global water model WaterGAP (Water Global Assessment and Prognosis) was compared to both gravity recovery and climate experiment (GRACE) and global positioning system (GPS) observations. The GRACE satellites sense the effect of TWS on the dynamic gravity field of the Earth. GPS reference points are displaced due to crustal deformation caused by time-varying TWS. Unfortunately, the worldwide coverage of the GPS tracking network is irregular, while GRACE provides global coverage albeit with low spatial resolution. Detrended TWS time series were analyzed by determining scaling factors for mean annual amplitude (f _GRACE) and time series of monthly TWS (f _GPS). Both GRACE and GPS indicate that WaterGAP underestimates seasonal variations of TWS on most of the land area of the globe. In addition, seasonal maximum TWS occurs 1 month earlier according to WaterGAP than according to GRACE on most land areas. While WaterGAP TWS is sensitive to the applied climate input data, none of the two data sets result in a clearly better fit to the observations. Due to the low number of GPS sites, GPS observations are less useful for validating global hydrological models than GRACE observations, but they serve to support the validity of GRACE TWS as observational target for hydrological modeling. For unknown reasons, WaterGAP appears to fit better to GPS than to GRACE. Both GPS and GRACE data, however, are rather uncertain due to a number of reasons, in particular in dry regions. It is not possible to benefit from either GPS or GRACE observations to monitor and quantify human water abstractions if only detrended (seasonal) TWS variations are considered. Regarding GRACE, this is mainly caused by the attenuation of the TWS differences between water abstraction variants due to the filtering required for GRACE TWS. Regarding GPS, station density is too low. Only if water abstractions lead to long-term changes in TWS by depletion or restoration of water storage in groundwater or large surface water bodies, GRACE may be used to support the quantification of human water abstractions.     

Human impact on Holocene sediment dynamics in the Eastern Mediterranean – the example of the Roman harbour of Ephesus

During the past millennia, many erosion and accumulation processes have been modified by anthropogenic impact. This holds especially true for the environs of ancient settlements and their harbours along the Mediterranean coasts. Our multi‐proxy investigations in the Roman harbour and the harbour canal of Ephesus (western Turkey) reveals that humans have significantly triggered soil erosion during the last three millennia. Since the eighth century bc , and especially since the Hellenistic period, a high sedimentation rate indicates fast alluviation and delta progradation of the Küçük Menderes. Deforestation, agriculture (especially ploughing) and grazing (especially goats) were the main reasons for erosion of the river catchment area. One consequence was significant siltation of the Hellenistic/Roman harbour basin. This sediment trap archives the human impact, which was strongly enhanced from Hellenistic/Roman to Byzantine times (second/first centuries bc to the sixth/seventh centuries ad ), evidenced by high sedimentation rates, raised values of heavy metal contaminations [lead (Pb), copper (Cu)], the occurrence of fruit tree pollen and of intestinal parasites. From the middle to the end of the first millennium ad , the influence of Ephesus declined, which resulted in a decrease of human impact. Studies of several ancient settlements around the Mediterranean Sea tell a comparable story. They also confirm that during their most flourishing periods the human impact totally overprinted the climatic one. To detect the latter, geo‐bio‐archives of relatively pristine areas have to be investigated in detail. Copyright © 2016 John Wiley & Sons, Ltd.     

New spatial dimensions of global cityscapes: From reviewing existing concepts to a conceptual spatial approach

Current global urbanisation processes are leading to new forms of massive urban constellations. The conceptualisations and classifications of these, however, are often ambiguous, overlap or lag behind in scientific literature. This article examines whether there is a common denominator to define and delimitate–and ultimately map–these new dimensions of cityscapes. In an extensive literature review we analysed and juxtaposed some of the most common concepts such as megacity, megaregion or megalopolis. We observed that many concepts are abstract or unspecific, and for those concepts for which physical parameters exist, the parameters are neither properly defined nor used in standardised ways. While understandably concepts originate from various disciplines, the authors identify a need for more precise definition and use of parameters. We conclude that often, spatial patterns of large urban areas resemble each other considerably but the definitions vary so widely that these differences may surpass any inconsistencies in the spatial delimitation process. In other words, today we have tools such as earth observation data and Geographic Information Systems to parameterise if clear definitions are provided. This appears not to be the case. The limiting factor when delineating large urban areas seems to be a commonly agreed ontology.     

Scales of columnar jointing in igneous rocks: field measurements and controlling factors

Columnar jointing is a common feature of solidified lavas, sills and dikes, but the factors controlling the characteristic stoutness of columns remain debated, and quantitative field observations are few in number. In this paper, we provide quantitative measurements on sizing of columnar joint sets and our assessment of the principal factors controlling it. We focus on (1) chemistry, as it is the major determinant of the physical (mechanical and thermal) properties of the lava, and (2) geology, as it influences the style of emplacement and lava geometry, setting boundary conditions for the cooling process and the rate of heat loss. In our analysis, we cover lavas with a broad range of chemical compositions (from basanite to phonolite, for six of which we provide new geochemical analyses) and of geological settings. Our field measurements cover 50 columnar jointing sites in three countries. We provide reliable, manually digitized data on the size of individual columns and focus the mathematical analysis on their geometry (23,889 data on side length, of which 17,312 are from full column sections and 3,033 data on cross-sectional area and order of polygonality). The geometrical observations show that the variation in characteristic size of columns between different sites exceeds one order of magnitude (side length ranging from 8 to 338 cm) and that the column-bounding polygons’ average order is less than 6. The network of fractures is found to be longer than required by a minimum-energy hexagonal configuration, indicating a non-equilibrium, geologically quick process. In terms of the development and characteristic sizing of columnar joint sets, our observations suggest that columns are the result of an interplay between the geological setting of emplacement and magma chemistry. When the geological setting constrains the geometry of the emplaced body, it exerts a stronger control on characteristic column stoutness. At unconstrained geometries (e.g. unconfined lava flows), chemistry plays the major role, resulting in stouter columns in felsic lavas and slenderer columns in mafic lavas.     

Quantitative analysis of numerically induced mixing in a coastal model application

In recent years, various attempts have been made to estimate the amount of numerical mixing in numerical ocean models due to discretisation errors of advection schemes. In this study, a high-resolution coastal model using the ocean circulationmodel GETM is applied to the Western Baltic Sea, which is characterised by energetic and episodic inflows of dense bottom waters originating from the Kattegat. The model is equipped with an easy-to-implement diagnostic method for obtaining the numerical mixing which has recently been suggested. In this diagnostic method, the physical mixing is defined as the mean tracer variance decay rate due to turbulent mixing. The numerical mixing due to discretisation errors of tracer advection schemes is defined as the decay rate between the advected square of the tracer variance and the square of the advected tracer, which can be directly compared to the physical variance decay. The source and location of numerical mixing is further investigated by comparing different advection schemes and analysing the amount of numerical mixing in each spatial dimension during the advection time step. The results show that, for the setup used, the numerically and physically induced mixing have the same orders of magnitude but with different vertical and horizontal distributions. As the main mechanism for high numerical mixing, vertical advection of tracers with strong vertical gradients has been identified. The main reason for high numerical mixing is due to bottom-following coordinates when density gradients, especially for regions of steep slopes, are advected normal to isobaths. With the bottom-following coordinates used here, the horizontal gradients are reproduced by a spurious sawtooth-type profile where strong advection through, but not along, the vertical coordinate levels occurs. Additionally, the well known relation between strong tracer gradients and high velocities on the one and high numerical mixing on the other hand is approved quantitatively within this work.