Sediment transport and beach morphodynamics induced by free long waves,bound long waves and wave groups

New laboratory data are presented on the influence of free long waves, bound long waves and wave groups on sediment transport in the surf and swash zones. As a result of the very significant difficulties in isolating and identifying the morphodynamic influences of long waves and wave groups in field conditions, a laboratory study was designed specifically to enable measurements of sediment transport that resolve these influences. The evolution of model sand beaches, each with the same initial plane slope, was measured for a range of wave conditions, firstly using monochromatic short waves. Subsequently, the monochromatic conditions were perturbed with free long waves and then substituted with bichromatic wave groups with the same mean energy flux. The beach profile changes and net cross-shore transport rates were extracted and compared for the different wave conditions, with and without long waves and wave groups. The experiments include a range of wave conditions, e.g. high-energy, moderate-energy, low-energy waves, which induce both spilling and plunging breakers and different turbulent intensities, and the beaches evolve to form classical accretive, erosive, and intermediate beach states. The data clearly demonstrate that free long waves influence surf zone morphodynamics and promote increased onshore sediment transport during accretive conditions and decreased offshore transport under erosive conditions. In contrast, wave groups, which can generate both forced and free long waves, generally reduce onshore transport during accretive conditions and increase offshore transport under erosive conditions. The influence of the free long waves and wave groups is consistent with the concept of the relative fall velocity, H/w_sT, as a dominant parameter controlling net beach erosion or accretion. Free long waves tend to reduce H/w_sT, promoting accretion, while wave groups tend to increase the effective H/w_sT, promoting erosion.     

���������о�Խ��������������Ч������(Ӣ)

??????????????????????о??????????????????е?Ч??,???????????????????????????????????????????????????????о????????:1)????????????????????????????о??????????????????Ч??????????????;2)??????????????????Ч?о?????????????????????????????????????????п????;3)???????????????????????????????????????????????????????????     

Estimation of Tasuj aquifer response to main meteorological parameter variations under Shared Socioeconomic Pathways scenarios

Theoretical and Applied Climatology - In this study, statistical and soft-computing methods are compared in forecasting groundwater levels under Shared Socioeconomic Pathways (SSPs) SSP1-2.6,...     

From discrete to continuum modelling of boundary value problems in geomechanics: An integrated FEM-DEM approach

Double-scale numerical methods constitute an effective tool for simultaneously representing the complex nature of geomaterials and treating real-scale engineering problems such as a tunnel excavation or a pressuremetre at a reasonable numerical cost. This paper presents an approach coupling discrete elements (DEM) at the microscale with finite elements (FEM) at the macroscale. In this approach, a DEM-based numerical constitutive law is embedded into a standard FEM formulation. In this regard, an exhaustive discussion is presented on how a 2D/3D granular assembly can be used to generate, step by step along the overall computation process, a consistent Numerically Homogenised Law. The paper also focuses on some recent developments including a comprehensive discussion of the efficiency of Newton-like operators, the introduction of a regularisation technique at the macroscale by means of a second gradient framework, and the development of parallelisation techniques to alleviate the computational cost of the proposed approach. Some real-scale problems taking into account the material spatial variability are illustrated, proving the numerical efficiency of the proposed approach and the benefit of a particle-based strategy.     

The Sin Quyen Cu–Fe–Au–REE deposit (northern Vietnam): composition and formation conditions

The Sin Quyen Cu–Fe–Au–REE deposit is localized in the Proterozoic deposits of the Phan Xi Pang zone, northern Vietnam. The mineralization is formed by lenticular and sheet-like bodies occurring concordantly with the host rocks. Seventeen orebodies have been recognized in the deposit, which form an ore horizon up to 140 m in total thickness, about 2 km in strike, and up to 350 m in dip. The ores are of simple mineral composition: Au-rich copper and iron sulfides (chalcopyrite, pyrite, pyrrhotite) and iron oxides (magnetite, hematite). Gold and silver are distributed unevenly in the ores: Their contents vary from hundredths and tenths of ppm to 1.8 ppm. Copper sulfide ores are the main concentrator of gold and silver. All ores are characterized by high REE contents, tens and hundreds of times exceeding the element clarkes. The highest contents have been revealed for Ce and La. Orthite is the main carrier of REE. No correlation between REE and ore elements of sulfide-oxide ores has been revealed, which points to the independent formation of the mineralization. Orebodies together with the host rocks underwent metamorphism at 500–600 to 630–685 °C and 3–7 kbar. The spatial association of the mineralization with amphibolites (metamorphosed basites) and the mineral composition of ores suggest that the Sin Quyen deposit is of Cyprian volcanogenic type.     

Three-dimensional hydrostratigraphical modelling to support evaluation of recharge and saltwater intrusion in a coastal groundwater system in Vietnam

Saltwater intrusion is generally related to seawater-level rise or induced intrusion due to excessive groundwater extraction in coastal aquifers. However, the hydrogeological heterogeneity of the subsurface plays an important role in (non-)intrusion as well. Local hydrogeological conditions for recharge and saltwater intrusion are studied in a coastal groundwater system in Vietnam where geological formations exhibit highly heterogeneous lithologies. A three-dimensional (3D) hydrostratigraphical solid model of the study area is constructed by way of a recursive classification procedure. The procedure includes a cluster analysis which uses as parameters geological formation, lithological composition, distribution depth and thickness of each lithologically distinctive drilling interval of 47 boreholes, to distinguish and map well-log intervals of similar lithological properties in different geological formations. A 3D hydrostratigraphical fence diagram is then generated from the constructed solid model and is used as a tool to evaluate recharge paths and saltwater intrusion to the groundwater system. Groundwater level and chemistry, and geophysical direct current (DC) resistivity measurements, are used to support the hydrostratigraphical model. Results of this research contribute to the explanation of why the aquifer system of the study area is almost uninfluenced by saltwater intrusion, which is otherwise relatively common in coastal aquifers of Vietnam.     

Public perception of climate change and disaster preparedness: Evidence from the Philippines

The Philippines is highly susceptible to both geophysical and climate-related disasters. This article explores Filipinos knowledge and perception of climate change and their association with what action Filipinos take to prepare for rapid onset natural hazards such as typhoons. Data for this study were collected from a nationally representative random survey of 5,184 adults conducted between March and April of 2017. Filipinos self-report relatively low levels of knowledge of climate change and cited increased temperatures, shifts in seasons, and heavier rains as the most likely consequences. Levels of disaster preparedness in the Philippines differ widely by region. Although most Filipinos perceive that natural hazards are a risk to them, only a third of Filipinos undertake measures to prepare for disasters. Filipinos who perceive climate-related changes directly impacting their households report taking greater action to prepare for disasters. Filipinos who believe they have been directly impacted by climate-related changes are also more likely to prepare for disasters, take planning actions, and undertake material actions to prepare, such as dwelling improvements. Other factors associated with disaster preparedness include gender, membership in an association, wealth, risk perception, and prior exposure to and losses due to disasters. The findings imply that, while posing different challenges and requiring different responses, adaptation to climate change and disaster preparedness are inherently associated and potentially mutually reinforcing. Policies and programs would arguably benefit from a more unified intervention framework that links climate change adaptation and disaster preparedness.     

Predicting soil erosion hazard in Lattakia Governorate(W Syria)

The main objective of this study is to predict soil erosion in the Lattakia Governorate(WSyria)using the Water Erosion Prediction Project model(WEPP)and to compare the result with that of the RUSLE.Field survey and data collection were carried out,and 44 soil samples were analyzed.In addition,all the necessary input files were prepared for use in the WEPP model and RUSLE.Results show that more than of 80%of the locations studied experience slight to moderate erosion(less than 5 t/ha/y),whereas the rest of the locations experience severe soil erosion hazard.Moreover,the volume of runoff estimated by the WEPP model is in the range of 51e321 mm,and the R^2 between the simulated soil erosion and the predicted runoff reached 0.68.Interestingly,the R^2 between the WEPP model and RUSLE is 0.56,which indicates a good correlation between the two models.     

Influence of phosphate on the oxidation kinetics of nanomolar Fe(II) in aqueous solution at circumneutral pH

The oxygenation kinetics of nanomolar concentrations of Fe(II) in aqueous solution have been studied in the absence and presence of millimolar concentrations of phosphate over the pH range 6.0-7.8. At each phosphate concentration investigated, the overall oxidation rate constant varied linearly with pH, and increased with increasing phosphate concentration. A model based on equilibrium speciation of Fe(II) was found to satisfactorily explain the results obtained. From this model, the rate constants for oxygenation of the Fe(II)-phosphate species FeH₂PO₄⁺, FeHPO₄ and FePO₄⁻ have been determined for the first time. FePO₄⁻ was found to be the most kinetically reactive species at circumneutral pH with an estimated oxygenation rate constant of (2.2 ± 0.2) × 10 M⁻¹ s⁻¹. FeH₂PO₄⁺ and FeHPO₄ were found to be less reactive with oxygen, with rate constants of (3.2 ± 2) × 10⁻² M⁻¹ s⁻¹ and (1.2 ± 0.8) × 10⁻¹ M⁻¹ s⁻¹, respectively.