GALILEO系统仿真与分析

本文着重阐述了GALILEO仿真系统星座和误差模型的构建过程,利用该系统进行DOP值分析并通过定位解算验证了GALILEO系统的性能指标。通过与GPS系统性能指标进行比较,得出GALILEO系统的星座设计具有较好的DOP值分布特性,定位精度优于GPS定位精度。在进行差分定位时,其误差贡献比较大的是接收机噪声和卫星钟差,因此提高差分定位的关键是降低接收机的噪声水平和提高卫星钟差预报精度。     

汶川地震山地灾害遥感快速提取及其分布特点分析

针对泥石流滑坡灾害体特有的物质组成与活动特点,通过比较分析其在不同遥感影像的光谱特征差异,选择ETM+影像作为主要数据源,提取湿度指数与绿度指数,利用ETM+的穗帽变换、影像差值增强、密度分割和掩膜技术建立了泥石流滑坡山地灾害快速提取模型,并用于汶川地震.通过灾害体的提取,分析了本次地震山地次生灾害的分布规律,利用空间叠加进行了成因的分析.本次地震山地灾害具有如下特点:(1)沿主要地表破裂带分布;(2)山地灾害主要出现在8度-9度地震烈度区,随着烈度的降低,山地灾害的总面积也相应的减少;(3)山地灾害主要发生在海拔高度1000-2500m的地带;(4)主要发生在坡度20°-50°之间的边坡上;(5)地震及余震期间以崩塌滑坡滚石为主,后期以泥石流滑坡为主;(6)具有河流左右两岸呈不对称分布等特点.结果表明,利用ETM+影像建立基于湿度指数与绿度指数的快速提取模型,对于大规模泥石流滑坡提取效果较好,进行大区域山地灾害的遥感快速提取是可行的.     

冰川流域径流估算方法探索——以科其喀尔巴西冰川为例

利用科其喀尔巴西冰川2005年6月至2006年5月水文、气象资料,并结合15 m融合TM、1∶50000地形图、FY-2C数值产品和NCEP/NCAR再分析资料等,构建了10个简单、具有一定自主创新意义的分布式冰川融水径流模型(空间分辨率60 m),较好地模拟了研究冰川流域的日平均流量.结果表明,利用FY-2C总云量资料并结合辐射传输参数化方案能够较好地估算流域太阳入射短波辐射;单独利用总辐射有直接估算大型冰川流域某段时期融水径流的可能.气温与冰川末端流量呈指数关系,度日因子模型更适合于消融季节;提出的基于单元格气温和海拔的简单消融模型有望改进度日因子模型.在气温指数模型中加入太阳辐射调整系数,能够更好地估算冰川融水径流.简化分布式能量平衡模型能够反映大型冰川融水径流的变化;单层汇流方案在一定程度上能够概化托木尔型冰川的汇流过程.     

长江中下游湖泊沉积物铅污染记录——以洪湖、固城湖和太湖为例

2002～2005年在长江中下游的洪湖、固城湖和太湖分别采集了沉积物柱样钻孔,测定了总有机碳（TOC）和金属元素包括Pb,Al,Fe,Ti等,并采用²¹⁰Pb和¹³⁷Cs进行了近代沉积物定年。研究结果表明,洪湖钻孔平均沉积速率为0.15cm/a,固城湖平均沉积速率在0.067cm/a,太湖平均沉积速率为0.35～0.41cm/a。根据湖泊沉积物中铅元素与参考元素（Al,Fe和Ti）浓度和TOC的相关关系建立了回归方程,线性关系极显著（p<0.001）。根据回归方程获取了钻孔中铅的背景值变化,研究表明近代沉积物中金属铅不仅仅来源于自然的作用,而人类活动导致铅的累积发生时间都在20世纪70年代,从一个侧面也说明利用沉积物铅含量变化进行断代存在可能性。对太湖钻孔而言,其污染程度要高于洪湖和固城湖。研究结果表明近30年来洪湖和固城湖人为造成湖泊沉积物铅累积量在不断增加,其沉积物铅污染有进一步加重的趋势,应受到科学家和管理部门的关注。     

重金属污染胁迫下盐肤木的生化效应及波谱特征

利用遥感生物地球化学的原理和方法,分析了德兴铜矿的重金属污染状况和植物盐肤木的生物地球化学效应,对盐肤木生物地球化学效应的波谱特征进行了系统的提取和分析.研究发现酸、铜、镉等是德兴铜矿地区主要的环境污染因子,野外调查及样品的化验分析表明盐肤木对铜元素呈现一定的富集作用和很强的位移效应,是适合铜矿复垦的植被.利用导数光谱、包络线去除、红边效应、植被指数等光谱信息处理方法对盐肤木的野外波谱分析表明,随着叶片中Cu等金属元素含量的增大,其产生的毒化效应的波谱特征越明显,盐肤木叶片光谱反射率明显升高,波形蓝移,红边陡坡斜率增大,叶绿素吸收深度变浅,吸收中心稍有蓝移,水的吸收深度变浅,吸收中心位置红移,绿度指数变化明显.对波谱特征及其与重金属含量的相关关系综合分析后认为,红边特征、植被指数NDVI、叶绿素吸收深度与叶片铜含量关系显著,可以作为植被铜污染遥感图像特征提取的参考.     

新疆北山晚古生代内生金属矿床成矿系列研究

新疆北山造山带是我国重要的铜镍金铁矿产勘查区之一.通过初步研究,按照成矿系列的学术思想,将区内晚古生代金属矿床划分为3个成矿系列,即晚古生代与基性-超基性岩浆有关的铜镍硫化物矿床成矿系列、晚古生代与强应变构造带有关的铜金矿床成矿系列和与火山岩有关的铁矿床成矿系列.     

应用电性特征研究银川平原地下水水质空间分布规律

以蕴涵丰富地下水系统水循环信息的电性特征为线索,采用电测深法,在分析研究银川平原450 m深度内地下水系统的空间结构的基础上,对平原地下水水质空间分布规律进行了综合研究,为银川平原地下水资源可持续利用战略的制订提供了依据。     

Application of Spectral Decomposition to Detection of Fracture-Cavity Carbonate Reservoir Beds in the Tahe Oiifieid, Tarim Basin, NW China

Ordovician fracture-cavity carbonate reservoir beds are the major type of producing formations in the Tahe oilfield, Tarim Basin. The seismic responses of these beds clearly changes depending on the different distance of the fracture-cavity reservoir bed from the top of the section. The seismic reflection becomes weak or is absent when the fracture-cavity reservoir beds are less than 20 ms below the top Ordovician. The effect on top Ordovician reflection became weaker with deeper burial of fracture-cavity reservoir beds but the developed deep fracture-cavity reservoir beds caused stronger reflection in the interior of the Ordovician. This interior reflection can be divided into strong long-axis, irregular and bead string reflections, and was present 80 ms below the top Ordovician. Aimed at understanding reflection characteristics, the spectral decomposition technique, which uses frequency to ＂tune-in＂ bed thickness, was used to predict Ordovician fracture-cavity carbonate formations in the Tahe oilfield. Through finely adjusting the processing parameters of spectral decomposition, it was found that the slice at 30 Hz of the tuned data cube can best represent reservoir bed development. Two large N-S-trending strong reflection belts in the mid-western part of the study area along wells TK440- TK427-TK417B and in the eastern part along wells TK404-TK409 were observed distinctly on the 30 Hz slice and 4-D time-frequency data cube carving. A small N-S trending reflection belt in the southern part along wells T403-TK446B was also clearly identified. The predicted reservoir bed development area coincides with the fracture-cavities connection area confirmed by drilling pressure testing results. Deep karst cavities occur basically in three reservoir bed-development belts identified by the Ordovician interior strong reflection. Spectral decomposition proved to be a useful technique in identifying fracture-cavity reservoir beds.     

Interaction of copper with fatty acids in Soxhlet extraction and its influence

Treatment with metallic copper for the removal of elemental sulfur from bitumen extracted from sedimentary rocks or petroleum is the most widely used method. Little attention has been paid, however, to its disadvantages. It was observed that copper can interact with some polar organic substances during conventional sulfur removal, which can strongly influence the quantitative and qualitative determination of bitumen, as has been confirmed by interaction of long-chain fatty acids with copper. The copper soap generated was analyzed by element analysis, inductively coupled plasma optical emission spectrometry （ICP-OES）, thermal analysis （TG-DSC） and Fourier Transform Infrared spectroscopy （FFIR）. Mechanism of the interaction was investigated and elucidated. Our experimental results would necessitate improvement of the present method for sulfur removal and/or a search for a new one.     

Late Cenozoic Stratigraphy and Paleomagnetic Chronology of the Zanda Basin, Tibet, and Records of the Uplift of the Qinghai-Tibet Plateau

The characteristics of Late Cenozoic tectonic uplift of the southern margin of the Qinghai- Tibet Plateau may be inferred from fluvio-lacustrine strata in the Zanda basin, Ngari, Tibet. Magnetostratigraphic study shows that the very thick fluvio-lacustrine strata in the basin are 5.89- 0.78 Ma old and that their deposition persisted for 5.11 Ma, i.e. starting at the end of the Miocene and ending at the end of the early Pleistocene, with the Quaternary glacial stage starting in the area no later than 1.58 Ma. Analysis of the sedimentary environment indicates that the Zanda basin on the southern Qinghai-Tibet Plateau began uplift at -5.89 Ma, later than the northern Qinghai-Tibet Plateau. Presence of gravel beds in the Guge and Qangze Formations reflects that strong uplift took place at -5.15 and -2.71 Ma, with the uplift peaking at -2.71 Ma.