3D-electrical resistivity tomography monitoring of salt transport in homogeneous and layered soil samples

Monitoring transport of dissolved substances in soil deposits is particularly relevant where safety is concerned, as in the case of geo-environmental barriers. Geophysical methods are very appealing, since they cover a wide domain, localising possible preferential flow paths and providing reliable links between geophysical quantities and hydrological variables. This paper describes a 3D laboratory application of electrical resistivity tomography (ERT) used to monitor solute transport processes. Dissolution and transport tests on both homogeneous and heterogeneous samples were conducted in an instrumented oedometer cell. ERT was used to create maps of electrical conductivity of the monitored domain at different time intervals and to estimate concentration variations within the interstitial fluid. Comparisons with finite element simulations of the transport processes were performed to check the consistency of the results. Tests confirmed that the technique can monitor salt transport, infer the hydro-chemical behaviour of heterogeneous geomaterials and evaluate the performances of clay barriers.     

The flow dynamics of an extremely large volume pyroclastic flow,the 2.08-Ma Cerro Galán Ignimbrite,NW Argentina,and comparison with other flow types

The 2.08-Ma Cerro Galán Ignimbrite (CGI) represents a >630-km³ dense rock equivalent (VEI 8) eruption from the long-lived Cerro Galán magma system (∼6 Ma). It is a crystal-rich (35–60%), pumice (<10% generally) and lithic-poor (<5% generally) rhyodacitic ignimbrite, lacking a preceding plinian fallout deposit. The CGI is preserved up to 80 km from the structural margins of the caldera, but almost certainly was deposited up to 100 km from the caldera in some places. Only one emplacement unit is preserved in proximal to medial settings and in most distal settings, suggesting constant flow conditions, but where the pyroclastic flow moved into a palaeotopography of substantial valleys and ridges, it interacted with valley walls, resulting in flow instabilities that generated multiple depositional units, often separated by pyroclastic surge deposits. The CGI preserves a widespread sub-horizontal fabric, defined by aligned elongate pumice and lithic clasts, and minerals (e.g. biotite). A sub-horizontal anisotropy of magnetic susceptibility fabric is defined by minute magnetic minerals in all localities where it has been analysed. The CGI is poor in both vent-derived (‘accessory’) lithics and locally derived lithics from the ground surface (‘accidental’) lithics. Locally derived lithics are small (<20 cm) and were not transported far from source points. All data suggest that the pyroclastic flow system producing the CGI was characterised throughout by high sedimentation rates, resulting from high particle concentration and suppressed turbulence at the depositional boundary layer, despite being a low aspect ratio ignimbrite. Based on these features, we question whether high velocity and momentum are necessary to account for extensive flow mobility. It is proposed that the CGI was deposited by a pyroclastic flow system that developed a substantial, high particle concentration granular under-flow, which flowed with suppressed turbulence. High particle concentration and fine-ash content hindered gas loss and maintained flow mobility. In order to explain the contemporaneous maintenance of high particle concentration, high sedimentation rate at the depositional boundary layer and a high level of mobility, it is also proposed that the flow(s) was continuously supplied at a high mass feeding rate. It is also proposed that internal gas pressure within the flow, directed downwards onto the substrate over which the flow was passing, reduced the friction between the flow and the substrate and also enhanced its mobility. The pervasive sub-horizontal fabric of aligned pumice, lithic and even biotite crystals indicates a consistent horizontal shear force existed during transport and deposition in the basal granular flow, consistent with the existence of a laminar, shearing, granular flow regime during the final stages of transport and deposition.     

New insights into peri-Gondwana paleogeography and the Gondwana super-fan system from detrital zircon U–Pb ages

We present a synopsis of detrital zircon U–Pb ages of sandstones from North Africa and neighboring Israel and Jordan, which allows us to identify zones with characteristic sediment provenance along the northern Gondwana margin (in present-day coordinates) in Cambrian–Ordovician times, and helps us to unravel the peri-Gondwana jigsaw puzzle. A special feature of the early Paleozoic cover sequence of North Africa is the eastward increase of 1.1–0.95 Ga detrital zircons, which become ubiquitous in the early Paleozoic sandstones of the Saharan Metacraton. Detrital zircons aged about 2.7–2.5, 2.15–1.75 and 0.75–0.53 Ga are also present. Early Paleozoic sandstones with similar provenance are known from peri-Gondwana terranes in the Eastern and Western Mediterranean and from NW Iberia. These terranes need not be transported from western Gondwana (Amazonia) as suggested previously. They were likely located to the north of the Saharan Metacraton during the early Paleozoic before they rifted off from Gondwana. Furthermore, we recognize an increase, as stratigraphic ages get younger, of ca. 1.0 Ga detrital zircons at some point between the Late Cambrian and late Middle Ordovician. We speculate that this might be linked to far-field tectonics and regional uplift in central Gondwana related to plate-tectonic reorganization along the Gondwana margin, leading to erosion of ca. 1.0 Ga basement and country rocks of the Transgondwanan supermountain and fluvial dispersal of detritus toward the Gondwana margin.     

The effects of World Heritage Sites on domestic tourism: a spatial interaction model for Italy

Culture is gaining increasing importance in the modern tourism industry and represents a significant force of attraction for tourists (both domestic and international). Cultural tourism allows destinations and regions to expand their customer base, diversify their offer, extend the stay of the tourist, and reduce seasonality. Great efforts are made, by national governments and regions, in order to obtain official designation regarding the relevance of their historical/cultural attractions, for example through UNESCO’s World Heritage Sites (WHS) list. Such an aspect seems particularly relevant for a country like Italy, which has a high number of entries in the WHS list and where regions take an active role in promoting tourism. Using an 12-year panel of domestic tourism flows, we investigate the importance of the regional endowment in terms of WHS from two perspectives: (a) by separately estimating the effects, on tourism flows, of WHS located in the residence region of tourists and in the destination region; and (b) by taking into account potential spatial substitution/complementarity effects between regions due to their WHS endowment. Finally, a sensitivity analysis is offered to evaluate the spatial extent of the latter.     

Perfluorinated compounds in blood of Caretta caretta from the Mediterranean Sea

Perfluorinated compounds (PFCs), widely used for their hydro-oil repellent properties, are almost non-degradable in the environment; there is scientific evidence that indicate bioaccumulation. They represent a threat to many organisms, because they are toxic and are endocrine disruptors. Scientific studies have demonstrated the presence of PFCs in blood and liver samples of fish, turtles, birds and mammals of marine ecosystems in different geographical areas. The aim of this study was to determine the distribution of PFOS and PFOA in blood samples of the marine turtle Caretta caretta, using a minimally invasive sampling procedure. 49 blood samples of marine turtle, taken from several Italian marine turtle rescue centers, were analyzed. While PFOA was never detected, measurable concentrations of PFOS were found in 15 blood samples; the values show a range from 1.14 ng/g to 28.51 ng/g (wet wt.). No differences between groups of samples taken from different areas were found.     

Neoproterozoic–Devonian stratigraphic evolution of the eastern Murzuq Basin,Libya: a tale of tilting in the central Sahara

The Murzuq Basin is one of the most petroliferous basins of North Africa. Its remote eastern flank has been largely ignored since early reconnaissance work in the 1950s and 1960s. This article presents new stratigraphic and sedimentological data on the Neoproterozoic through Devonian succession from the Mourizidie and Dor el Gussa regions. The Neoproterozoic to Cambrian Mourizidie and Hasawnah formations in the eastern part of the Mourizidie region dip to the east and north‐east, resting directly on late Precambrian metasediments and granitoids. These strata record the initial progradation of sand‐dominated braidplain systems upon peneplained Precambrian basement. Rhyolite clasts in the Hasawnah Formation may record tectonically driven uplift and unroofing in the southern Tibesti Massif or tectonomagmatic rejuvenation to the south of this massif. In the western part of the Mourizidie region, Late Ordovician through Silurian strata (Mamuniyat and Tanezzuft–Akakus formations) directly overlie late Precambrian metasediments and granitoids, and dip at a low angle towards the west into the Murzuq Basin. Elsewhere at the eastern Murzuq Basin flank, in Dor el Gussa, Late Ordovician glaciogenic sediments rest with angular unconformity upon shallow marine sandstones of Cambrian–Ordovician age. This angular unconformity may also occur in the Mourizidie region and indicates widespread tectonism, either as a result of a Middle–Late Ordovician orogenic event, far‐field tectonism related to the opening of the Rheic Ocean along the northern margin of Gondwana or alternatively crustal depression associated with the growth of Late Ordovician ice sheets. Unconformity development was also probably associated with glacial incision. Following ice sheet retreat, isostatic rebound during deglaciation resulted in uplift of tens to hundreds of metres, locally removing all Cambrian and Ordovician formations. Rising sea levels in the Silurian led to deposition of the Tanezzuft Formation on Precambrian basement in the northwestern Mourizidie region.     

Water use efficiency in an arid watershed: a case study

Integrated Water Resource Management (IWRM) becomes increasingly important in arid watersheds, where water resources are scarce and demands are rising under increased population pressure. In this case study, we present the results from the Elqui Valley in Chile, where water resources are shared between agriculture, mining operations, hydropower generation and drinking water for nearby cities. An IWRM model was applied to visualize water resources distribution in the catchment and determine irrigation and water use efficiencies. After calibration with observed surface and groundwater measurements, the model showed large differences in efficiencies between different irrigation sectors. Most notably, irrigation sectors with the highest irrigation security, i.e., higher water rights per hectare, were characterized with lower water use efficiencies. Frequent water deficits were present in sectors downstream of the main reservoir, which was related to limited water rights per hectare, lower irrigation efficiencies and higher water demands due to larger agricultural areas. In subsequent scenario analyses, the model was used to evaluate the impact of improved irrigation and water use efficiencies in these downstream sectors, to confirm an important reduction in water deficits, except for drought years when surface water resources are insufficient. In a third scenario, groundwater resources were allowed to compensate for water deficits, effectively reducing these in most irrigation sectors, especially during droughts. Expansion of the current agricultural area by 37% was evaluated, as a future scenario, and was found to be unsustainable, as aquifer levels are lowered to such levels that make annual recharge insufficient.     

Thermospheric/mesospheric temperatures on Venus: Results from ground-based high-resolution spectroscopy of CO2 in 1990/1991 and comparison to results from 2009 and between other techniques

We report temperatures in Venus’ upper mesosphere/lower thermosphere, deduced from reanalyzing very high resolution infrared spectroscopy of CO₂ emission lines acquired in 1990 and 1991. Kinetic temperatures at ～110 km altitude (0.15 Pa) are derived from the Doppler width of fully-resolved single line profiles measured near 10.4 μm wavelength using the NASA GSFC Infrared Heterodyne Spectrometer (IRHS) at the NASA IRTF on Mauna Kea, HI, close to Venus inferior conjunction and two Venus solstices. Measured temperatures range from ～200 to 240 K with uncertainty typically less than 10 K. Temperatures retrieved from similar measurement in 2009 using the Cologne Tuneable Heterodyne Infrared Spectrometer (THIS) at the NOAO McMath Telescope at Kitt Peak, AZ are 10–20 K lower. Temperatures retrieved more recently from the SOIR instrument on Venus EXpress are consistent with these results when the geometry of observation is accounted for. It is difficult to compare ground-based sub-mm retrievals extrapolated to 110 km due to their much larger field of view, which includes the night side regions not accessible to infrared heterodyne observations. Temperature variability appears to be high on day-to-day as well as longer timescales. Observed short term and long term variability may be attributed to atmospheric dynamics, diurnal variability and changes over solar activity and seasons. The Venus International Reference Atmosphere (VIRA) model predicts cooler temperatures at the sampled altitudes in the lower thermosphere/upper mesosphere and is not consistent with these measurements.     

Using the present to estimate the future: A simplified approach for the quantification of climate change effects on urban flooding by scenario analysis

Understanding and modelling pluvial flood patterns is pivotal for the estimation of flood impacts in urban areas, especially in a climate change perspective. However, urban flood modelling under climate change conditions poses several challenges. On one hand, the identification and collection of climate change data suitable for flood-related evaluations requires consistent computational and scientific effort. On the other hand, large difficulties can arise in the reproduction of the rainfall-runoff transformation process in cases when only little information about the subsurface processes is known. In this perspective, a simplified approach is proposed to address the challenges regarding the quantitative estimation of climate change effects on urban flooding for real case applications. The approach is defined as “bottom-up” because climate change information is not included in flood modelling, but it is only invoked for the interpretation of results. In other words, the challenge faced in this work is the development of a modelling strategy that is expeditious, because it does not require flood simulations for future rainfall scenarios, but only under current climate conditions, thus reducing the overall computational effort; and it is flexible, because results can be easily updated once new climate change data, scenarios or methods become available, without the need of additional flood simulations. To simulate real case applications, the approach is tested for a scenario analysis, where different return periods and hyetograph shapes are used as input for urban inundation modelling in Naples, Italy. The approach can support public and private stakeholders, such as land administrators and water systems managers; moreover, it represents a valuable and effective basis for climate change risk communication strategies.