Episodic granite accumulation and extraction from the mid‐crust

The processes of long‐range granitic magma transfer from mid‐ and lower crustal anatectic zones to upper crustal pluton emplacement sites remain controversial in the literature. This is partly because feeder networks that could have accommodated this large‐scale magma transport remain elusive in the field. Existing granite ascent models are based largely on numerical and theoretical studies that seek to demonstrate the viability of fracture‐controlled magma transport through dykes or self‐propagating hydrofractures. In most cases, the models present very little supporting field evidence, such as sufficiently voluminous near‐ or within‐source magma accumulations, to support their basic premises. We document large (deca‐ to hectometre‐scale), steeply dipping and largely homogeneous granite lenses in suprasolidus (~5 kbar, ~750 °C) mid‐crustal rocks in the Damara Belt in Namibia. The lenses are surrounded by and connected to shallowly dipping networks of stromatic leucogranites in the well‐layered gneisses of the deeply incised Husab Gorge. The outcrops define a four‐stage process from (i) the initial formation and growth of large, subvertical magma‐filled lenses as extension fractures developed at high angles to the subhorizontal regional extension in relatively competent wall‐rock layers. This stage is followed by (ii) the simultaneous lateral inflation and (iii) subcritical vertical growth of the lenses to a critical length that (iv) promotes fracture destabilization, buoyancy‐driven upward fracture mobilization and, consequently, vertical magma transport. These field observations are compared with existing numerical models and are used to constrain, by referring to the dimensions of the largest preserved inflated leucogranite lens, an estimate of the minimum fracture length (~100 m) and volume (~2.4 × 10⁵ m³) required to initiate buoyancy‐driven brittle fracture propagation in this particular mid‐crustal section. The critical values and field relationships compare favourably with theoretical models of magma ascent along vertical self‐propagating hydrofractures which close at their tails during propagation. This process leaves behind subtle wake‐like structures and thin leucogranite trails that mark the path of magma ascent. Reutilization of such conduits by repeated inflation and drainage is consistent with the episodic accumulation and removal of magma from the mid‐crust and is reflected in the sheeted nature of many upper crustal granitoid plutons.     

Exhumation history of the Peake and Denison Inliers: insights from low-temperature thermochronology

Multi-method thermochronology applied to the Peake and Denison Inliers (northern South Australia) reveals multiple low-temperature thermal events. Apatite fission track (AFT) data suggest two main time periods of basement cooling and/or reheating into AFT closure temperatures (～60–120°C); at ca 470–440 Ma and ca 340–300 Ma. We interpret the Ordovician pulse of rapid basement cooling as a result of post-orogenic cooling after the Delamerian Orogeny, followed by deformation related to the start of the Alice Springs Orogeny and orocline formation relating to the Benambran Orogeny. This is supported by a titanite U/Pb age of 479 ± 7 Ma. Our thermal history models indicate that subsequent denudation and sedimentary burial during the Devonian brought the basement rocks back to zircon U–Th–Sm/He (ZHe) closure temperatures (～200–150°C). This period was followed by a renewal of rapid cooling during the Carboniferous, likely as the result of the final pulses of the Alice Springs Orogeny, which exhumed the inlier to ambient surface temperatures. This thermal event is supported by the presence of the Mount Margaret erosion surface, which indicates that the inlier was exposed at the surface during the early Permian. During the Late Triassic–Early Jurassic, the inlier was subjected to minor reheating to AFT closure temperatures; however, the exact timing cannot be deduced from our dataset. Cretaceous apatite U–Th–Sm/He (AHe) ages coupled with the presence of contemporaneous coarse-grained terrigenous rocks suggest a temporally thermal perturbation related with shallow burial during this time, before late Cretaceous exhumation cooled the inliers back to ambient surface temperatures.     

The variation of crustal stretching and different modes of rifting along the Australian southern continental margin

The southern margin of Australia is a passive continental margin, formed during a Late Jurassic–Cretaceous rifting phase. The development of this passive margin is mainly associated with extensional processes that caused crustal thinning. In this work, we have measured the amount of extension and the stretching factor (β factor) across seven transect profiles approximately evenly distributed across the margin. The obtained results show that the amount of extension and the β factor along the margin vary from west to east. The lowest amount of extension, low–intermediate β factors and a very narrow margin are observed in the western part with 80 km of extension and is underlain mostly by the Archean Yilgarn Craton and the Albany–Fraser Orogen. The Gawler Craton in the centre of the south Australian margin is another region of low extension and low–intermediate β factor. The largest amount of extension (384 km) and the largest β factor (β = 1.88) are found in the eastern part of the passive margin in an area underlain by Phanerozoic Tasman Orogen units. Our results imply that there is a strong control of the age and thickness of the continental lithosphere on the style of rifting along the Australian passive margin. Rifting of old and cold lithosphere results in a narrow passive margin, with the formation of relatively few faults with relatively wide spacing, while rifting of younger, warmer lithosphere leads to wide rifting that is accommodated by a large number of faults with small spacing.     

Stability study on the northern batter of MBC Open Pit using Plaxis 3D

Cracks appeared on the northern batter at Maddingley Brown Coal Open Pit Mine, Victoria, Australia, on 8 November 2013 and a 2-day rainfall event happened 5 days later. This study models the stability of the northern batter considering the effect of the rainfall event and an emergency buttress using finite element method (FEM) encoded in Plaxis 3D. It is found that the batter tended to lead to block sliding after overburden removal. The observed vertical crack would be a combined action of the overburden removal and groundwater flow. The simulated location of cracks agrees well with the actual location, and the simulated heave of the coal seam is in good agreement with the experience in Victoria brown coal open pit mining. The rainfall accelerated the development of the cracks. With the construction of the emergency buttress, the batter became stable that is in good agreement with the monitored data.     

Early growth fault activity: new evidence for extension in the upper Cambrian Owen Group,Proprietary Peak,western Tasmania,Australia

The coarse-grained, upper Cambrian Owen Group of western and northern Tasmania is a prominent feature of the Tasmanian landscape and regional map series. The group has previously been divided into four informal formations (Lower Owen Conglomerate, Middle Owen Sandstone, Middle Owen Conglomerate and Upper Owen Sandstone) that have been correlated across the state over tens to hundreds of kilometres. The deposition of these sediments is largely believed to have occurred during extensional tectonics, but some authors continue to argue a compressional tectonic regime. Detailed mapping and sedimentological work around Proprietary Peak on the Mount Jukes massif, 10 km south of Queenstown, Tasmania, has identified significant depositional variations controlled by early growth faulting and paleotopography. Discontinuity of stratigraphic units (L6–L13) across two growth faults on the north face of Proprietary Peak shows the strong effect on sediment deposition in the area. Paleotopography is also evident with most stratigraphic units (L8–L13 and U1) gradually onlapping basement during their deposition. Significant paleotopography has also been identified on East Jukes Peak, where lower Owen Group sedimentary units onlap basement volcanics, with no evidence for tectonically controlled deposition. Field evidence strongly supports the deposition of the Owen Group during extensional tectonics, after a period of prolonged erosion of the underlying Mount Read Volcanics. The distinct variation in vertical and lateral extent of stratigraphic units within the Owen Group in the Proprietary Peak area suggests that widespread lithostratigraphic correlation of older Owen Group sedimentary units across Tasmania may not be feasible.     

Passive microwave remote sensing of the historic February 2010 snowstorms in the Middle Atlantic region of the USA

The snowfall in the Baltimore/Washington metropolitan area during the winter of 2009/2010 was unprecedented and caused serious snow‐related disruptions. In February 2010, snowfall totals approached 2 m, and because maximum temperatures were consistently below normal, snow remained on the ground the entire month. One of the biggest contributing factors to the unusually severe winter weather in 2009/2010, throughout much of the middle latitudes, was the Arctic Oscillation. Unusually high pressure at high latitudes and low pressure at middle latitudes forced a persistent exchange of mass from north to south. In this investigation, a concerted effort was made to link remotely sensed falling snow observations to remotely sensed snow cover and snowpack observations in the Baltimore/Washington area. Specifically, the Advanced Microwave Scanning Radiometer onboard the Aqua satellite was used to assess snow water equivalent, and the Advanced Microwave Sounding Unit‐B and Microwave Humidity Sounder were employed to detect falling snow. Advanced Microwave Scanning Radiometer passive microwave signatures in this study are related to both snow on the ground and surface ice layers. In regard to falling snow, signatures indicative of snowfall can be observed in high frequency brightness temperatures of Advanced Microwave Sounding Unit‐B and Microwave Humidity Sounder. Indeed, retrievals show an increase in snow water equivalent after the detection of falling snow. Yet, this work also shows that falling snow intensity and/or the presence of liquid water clouds impacts the ability to reliably detect snow water equivalent. Moreover, changes in the condition of the snowpack, especially in the surface features, negatively affect retrieval performance. Copyright © 2011. This article is a U.S. Government work and is in the public domain in the USA.     

An in-situ integrated suspended sediment stream sampler (IS3)

An inexpensive, lightweight stream sampler is described which provides a method for continuous collection of suspended stream sediments. The IS^3* sampler collects integrated suspended stream samples, and because the sampler relies on basic sedimentation principles, it can be deployed to collect suspended sediment stream samples for environmental studies or geochemical exploration in remote areas. The sampler trapped from 0.45 to 1.2 g of dry sediment during 7- to 8-d field tests conducted during 1985.