A site effect study in the Verchiano valley during the 1997 Umbria-Marche (Central Italy) earthquakes

Strong site effects were observed during the two M _W 5.7 and M _W 6.0 main shocks of the Colfiorito seismic crisis which occured on September 26, 1997 in Umbria-Marche (Central Italy).The most obvious indications of these effects are the dramatic differences in damage shown by buildings of similar construction in neighboring villages.Such observations were specifically made in the Verchiano valley in the fault area, 15 km south of Colfiorito where the Verchiano village and the Colle and Camino hamlets were heavily damaged (MCS intensity IX-X) since the first main shock of 1997/09/26,while in contrast, the Curasci village located 2 km eastwards remains almost intact.In order to study the anomalous ground motion amplifications in this area, an array of 11, 3-components seismo- and accelero-meters was set up during the 1997/10/20-24 period, extending from the western side of the valley, up to the top of Mount San Salvatore, going accross the Colle and Curasci hamlets.During the experiment, 67 aftershocks enlightened the valley from the Colfiorito (10 km north) and the Sellano (6 km south) active swarms.Seismic refraction experiments were conducted at the same time in the 500 m wide, 1500 m long Verchiano valley in order to determine the thickness and main characteristics of the alluvial infilling.The main results are: (i) compared to the valley side ground motion, and for all the events, recordings in the central part of the valley (piana di Verchiano) show relative amplification of 10 with a clear lengthening of the seismogram duration by a factor of 2 – (ii) broad band relative amplification of 6–8 is also clearly identified at the top of the Mount San Salvatore overhanging the valley – (iii) any of the site effect measurements done explains by itself the strongly contrasted damage observed at Colle and Curasci: i.e. the modification of the near-field radiation pattern by interaction with the free heterogeneous surface may have induced local shadow zones that saved Curasci.     

First detection of glacial meltwater signature in tree‐ring δ18O: Reconstructing past major glacier runoff events at Lago Verde (Miage Glacier,Italy)

With the aim of evaluating the influence of glacial meltwater signature on tree‐ring stable isotopes, we analysed δ¹⁸O and δ¹³C in the tree rings of Larix decidua Mill. specimens growing in the area of an ice‐contact lake (Lago Verde, at Miage Glacier, European Alps). Additionally, we analysed δ¹⁸O in the glacial meltwater of the lake and of the glacier stream and compared it with the δ¹⁸O of precipitation predicted by a spatial model. We found that tree‐ring cellulose of trees fed by glacial meltwaters (LVW site) is significantly more depleted in δ¹⁸O than at a control site LVM (?0.91‰) fed only by precipitation, thus reflecting the measured higher depletion of glacial meltwaters with respect to local precipitation. δ¹³C values did not show significant differences in mean values between the two sites but an anomalous correlation with summer temperature was found at the LVW site, probably due to the different responses of trees stomatal conductance. Over the 30‐year period of analysis, four years at LVW (1992, 1995, 2003 and 2009) were markedly depleted in δ¹⁸O. These years are those when the highest summer temperatures were recorded in the area (the ones during which glacier ablation usually increases and more depleted meltwaters fill the lake), with the exception of 1995 during which high water levels occurred following the year with the second highest summer temperature (1994). Overall, our analysis demonstrates that tree‐ring δ¹⁸O, driven by the glacial meltwater signature in the lake, can be used for detecting past major glacier runoff events. The proposed approach could also be used for quantifying past glacier runoff and for defining past distribution areas of glacial meltwaters in glacier forefields, thus contributing to past environmental reconstructions and to hazard assessment.     

Geological and archaeological evidence of active faulting on the Martana Fault (Umbria–Marche Apennines,Italy) and its geodynamic implications

This paper examines the morphotectonic and structural–geological characteristics of the Quaternary Martana Fault in the Umbria–Marche Apennines fold‐and‐thrust belt. This structure is more than 30 km long and comprises two segments: a N–NNW‐trending longer segment and a 100°N‐trending segment. After developing as a normal fault in Early Pleistocene times, the N–NNW Martana Fault segment experienced a phase of dextral faulting extending from the Early to Middle Pleistocene boundary until around 0.39 Ma, the absolute age of volcanics erupted in correspondence to releasing bends. The establishment of a stress field with a NE–ENE‐trending σ₃ axis and NW–NNW σ₁ axis in Late Pleistocene to Holocene times resulted in a strong component of sinistral faulting along N–NNW‐trending fault segments and almost pure normal faulting on newly formed NW–SE faults. Fresh fault scarps, the interaction of faulting with drainage systems and displacement of alluvial fan apexes provide evidence of the ongoing activity of this fault. The active left‐lateral kinematic along N–NNW‐trending fault segments is also revealed by the 1.8 m horizontal offset of the E–W‐trending Decumanus road, at the Roman town of Carsulae. We interpret the present‐day kinematics of the Martana Fault as consistent with a model connecting surface structures to the inferred north‐northwest trending lithospheric shear zone marking the western boundary of the Adria Plate. Copyright © 2003 John Wiley & Sons, Ltd.     

The Ricker Hills Tillite provides evidence of Oligocene warm-based glaciation in Victoria Land, Antarctica

The relationship between the Ricker Hills Tillite (RHT), which represents the northernmost outcrop of lithified continental glacial deposits in Victoria Land, is discussed with respect to the glacial landscape assemblage of the Ricker Hills, a nunatak at the internal border of the Transantarctic Mountains. A warm-based ice sheet deposited the tillite and induced syn- to post-depositional glacial deformation under wet conditions both of the tillite and of the bedrock. The thickness of the ice sheet on the nunatak is estimated to have been 600 m, at most. The area had been deeply eroded before deposition of the RHT as documented by the low elevation of tillite outcrops located in overdeepened depressions of the nunatak. Micropaleontological analysis evidences only the presence of Permian to Jurassic palynomorphs. X-ray diffraction and SEM–EDS analyses of clay minerals in the RHT indicate continental chemical weathering under wet conditions after the RHT deposition. As documented by clay mineral assemblage variation in CRP drillholes, the progressive cooling of the Antarctic continent allowed chemical weathering in “warm” conditions until the Late Oligocene period in southern Victoria Land, leading to a chronological constrain for RHT deposition. Conservatively estimating the sea level to have been between the tillite outcrops and the erosional trimline limiting horns in the Ricker Hills, at the time of RHT deposition, we suggest that the maximum uplift of the area would not have exceeded 900–1500 m since at least Late Oligocene.     

An example of solute spreading in nonstationary, bounded geological formations

We analyze the impact of a linear trend in the mean log-conductivity on the transport of a conservative tracer in a bounded domain. The effects of such a linear trend on solute transport were analyzed in depth for unbounded domains (Rubin and Seong, Water Resour Res 30(11):2901–2911, 1994; Indelman and Rubin, Water Resour Res 31(5):1257–1265, 1995; Water Resour Res 32(5):1257–1265, 1996), whereas studies concerning this special case of medium nonstationarity in finite domains usually focus on head or flow statistics (Guadagnini et al., Stoch Environ Res Risk Assess, 17:394–407, 2003). In this study both ensemble and effective plume moments are provided for an instantaneous release of a solute through a linear source normal to the mean flow direction, by taking into account different sizes of the source. The analysis involving a steady velocity field spatially nonstationary is developed by using the stochastic finite element method. Results show that ensemble moments are affected by increasing trends both parallel and normal to the mean flow direction, but the impact on effective plume moments is very different. A parallel trend does not seem to influence the effective second moments; while a normal trend, although modifies the transverse effective moment only weakly, strongly increases the longitudinal one, especially for large initial sizes of the source. Furthermore, the increase of the particle displacement variance produced by a parallel trend in the finite domain disagrees with the results obtained in an unbounded domain, due to the boundary conditions here considered making both head and velocity moments nonstationary and nonsymmetric.     

Statistical correlation of earthquake and ambient noise spectral ratios

The Horizontal-to-Vertical Spectral Ratio from earthquake (HVSR) and from ambient noise (HVN) recordings realistically indicate the fundamental frequency of soil response but, for the majority of the worldwide examined sites, they do not provide reliable amplification curves as calculated by the earthquake standard Spectral Ratio (SSR). Given the fact that HVSR and especially HVN can be easily obtained, it is challenging to search for a meaningful correlation with SSR amplification functions for the entire frequency band and to use the results for the SSR estimate at a further site where only noise measurements are available. To this aim we used recordings from 75 sites worldwide and we applied a multivariate statistical approach (canonical correlation analysis) to investigate and quantify any correlation among spectral ratios. The canonical correlation between SSR and HVN is then used to estimate the expected SSR at each site by a weighted average of the SSR values measured at the other sites; the weights are properly set to account more for sites with similar behaviour in terms of the canonical correlation results between HVN and SSR. This procedure, repeated for all sites in turn, constitutes the basis of a cross validation. The comparison between the inferred and the original SSR highlights the improvements of site response estimation with respect to the use of ambient noise techniques. The goodness and limitations of the reconstruction procedure are explained by specific geological settings.     

Dolomite-bearing orogenic garnet peridotites witness fluid-mediated carbon recycling in a mantle wedge (Ulten Zone,Eastern Alps,Italy)

We document the presence of dolomite ± apatite in orogenic peridotites from the Ulten Zone (UZ, Italian Alps), the remnants of a Variscan mantle wedge tectonically coupled with eclogitized continental crust. These dolomite peridotites are associated with dominant carbonate-free amphibole peridotites, which formed in response to infiltration of aqueous subduction fluids lost by the associated crustal rocks during high-pressure (HP) metamorphism and retrogression. Dolomite-free and dolomite-bearing peridotites share the same metamorphic evolution, from garnet- (HP) to spinel-facies (low-pressure, LP) conditions. Dolomite and the texturally coexisting phases display equilibrium redistribution of rare earth elements and of incompatible trace elements during HP and LP metamorphism; clinopyroxene and amphiboles from carbonate-free and carbonate-bearing peridotites have quite similar compositions. These features indicate that the UZ mantle rocks equilibrated with the same metasomatic agents: aqueous CO₂-bearing fluids enriched in incompatible elements released by the crust. The P–T crystallization conditions of the dolomite peridotites (outside the field of carbonatite melt + amphibole peridotite coexistence), a lack of textures indicating quench of carbonic melts, a lack of increase in modal clinopyroxene by reaction with such melts and the observed amphibole increase at the expense of clinopyroxene, all suggest that dolomite formation was assisted by aqueous CO₂-bearing fluids. A comparison of the trace element compositions of carbonates and amphiboles from the UZ peridotites and from peridotites metasomatized by carbonatite and/or carbon-bearing silicate melts does not help to unambiguously discriminate between the different agents (fluids or melts). The few observed differences (lower trace element contents in the fluid-related dolomite) may ultimately depend on the solute content of the metasomatic agent (CO₂-bearing fluid versus carbonatite melt). This study provides strong evidence that C–O–H subduction fluids can produce ‘carbonatite-like’ assemblages in mantle rocks, thus being effective C carriers from the slab to the mantle wedge at relatively low P–T. If transported beyond the carbonate and amphibole solidus by further subduction, dolomite-bearing garnet + amphibole peridotites like the ones from Ulten can become sources of carbonatite and/or C-bearing silicate melts in the mantle wedge. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users. In memory of Lauro Morten 1941–2006.     

The Phase A study of the ESA M4 mission candidate ARIEL

ARIEL, the Atmospheric Remote sensing Infrared Exoplanet Large survey, is one of the three M-class mission candidates competing for the M4 launch slot within the Cosmic Vision science programme of the European Space Agency (ESA). As such, ARIEL has been the subject of a Phase A study that involved European industry, research institutes and universities from ESA member states. This study is now completed and the M4 down-selection is expected to be concluded in November 2017. ARIEL is a concept for a dedicated mission to measure the chemical composition and structure of hundreds of exoplanet atmospheres using the technique of transit spectroscopy. ARIEL targets extend from gas giants (Jupiter or Neptune-like) to super-Earths in the very hot to warm zones of F to M-type host stars, opening up the way to large-scale, comparative planetology that would place our own Solar System in the context of other planetary systems in the Milky Way. A technical and programmatic review of the ARIEL mission was performed between February and May 2017, with the objective of assessing the readiness of the mission to progress to the Phase B1 study. No critical issues were identified and the mission was deemed technically feasible within the M4 programmatic boundary conditions. In this paper we give an overview of the final mission concept for ARIEL as of the end of the Phase A study, from scientific, technical and operational perspectives.