1∶25万石渠幅地质调查成果与进展

新发现海相侏罗纪地层;在理塘蛇绿岩群硅质岩中发现放射虫以及厘定甘孜 理塘裂谷时代;厘定了岩浆岩石序列,总结了岩浆岩组合及时空演化序列;初步研究的花岗岩构造岩浆环境;并厘定了金沙江结合带、甘孜理塘结合带;确定了构造格架并进行了构造组合划分等。     

Reunion hotspot activitity through tertiary time: Initial results from the ocean drilling program, leg 115

Leg 115 of the Ocean Drilling Program recovered basaltic rocks from four sites along the ancient trail of the Réunion hotspot. The age of volcanism, determined from biostratigraphic data at the four sites, increases to the north and records the motion of India away from the Réunion hotspot through Tertiary time. Hotspot activity began with the eruption of the Deccan flood basalt flows at the time of the Cretaceous/Tertiary boundary. The Réunion hotspot has been stationary with respect to other hotspots in the Atlantic and Indian Ocean basins through Tertiary time. The geochemical compositions of the drilled basalts differ according to the relative contributions of magmas from hotspot and MORB mantle sources.     

库米什盆地的硝酸盐型钾盐矿床

库米什盆地的硝酸盐型钾盐矿床,是利用~(40)K具有放射性特点,通过航空、地面伽玛能谱测量发现的。本文介绍了具有代表性C矿床的一般地质特征,总结了乌尊布拉克硝酸盐型钾盐矿床地质特征。矿床按其赋存状态可分为固体矿和卤水矿两类。水硝碱镁矾为最主要的工业矿物,共生矿物有钾硝石、钠硝石、杂卤石、芒硝、钠镁矾、石膏、石盐、极少量的泻利盐等。     

Geological - Geophysical - Geochemical Exploration Models of Copper - Iron Deposits in Southeastern Hubei

This paper discusses geological-geophysical-geochemical models of such typical deposits as the Tieshan-type Fe-Cu deposit, the Tonglushan-type Cu-Fe deposit, the Yehuaxiang-type Cu deposit, the Jiguanzui-type Cu-Au deposit, and the Tongshankou-type Cu (Mo) deposit. The models were established based on practical data of the polymetallic deposits dominated by copper ore in southeastern Hubei. These models, which are graphically illustrated in the paper, systematically summarize the metallogenic geological conditions and the geophysical-geochemical characteristics of copper deposits in this area. The models are of practical significance for studying copper deposits, predicting mineral resources, choosing exploration methods, and searching for ore deposits based on existing ones in the study area.     

华北地区重力场与沉积层构造

位于中朝准地台的华北地区是由几个不同的断块组成的,重力异常场的分布具有很强的浅部效应、块状分布和深浅叠加场的特点。重力的高程效应很复杂,不同波长的起伏变化有不同的影响系数。本文对布格改正的有关问题进行了讨论,指出华北如区表浅层的密度值偏低（2520kg/m³）,该区合理的布格改正公式为△g₂=-0.0879H。将重力场的垂直导数和向上延拓结合起来,有利于揭示地壳上部构造特征。本文搜集整理了由第四系到寒武系的沉积层资料,给出了沉积层总厚度和视密度的分布。对深部重力异常的分析表明,华北沉积层的形成有深源性质,在均衡调节中起着一定的内载荷作用。     

西南三江地区造山演化过程及成矿时空分布

三江地区单凭“一次造山”是难以圆满解释的。本文试以“多次造山”多期成矿”的思路作出合理说明。晚古生代－中生代早期多岛海造山阶段,羌塘弧、江达弧和临沧弧应为前锋弧,其后由一系列弧后盆地和岛弧或残余弧（或微大陆）组成。中生代中－晚期为陆内俯冲造山阶段,推测金沙江带、哀牢山带和龙门山－锦屏山带为俯冲主边界,从而形成本区燕山期重熔型花岗岩带,控制相应矿产的分布特征。新生代陆内转换造山阶段,造成特征的构造－岩浆－成矿带,具有生成大型或超大型矿床的潜力。     

河流相沉积中准层序与短期基准面旋回对比研究——以四川中部须家河组为例

通过详细分析曲流河沉积动力学特点,在四川中部须家河组建立了河流相沉积的准层序模式。曲流河沉积中可发育粒级向上变细准层序,也可以发育粒级向上变粗的准层序。辫状河准层序表现为粒级向上变细、河道水体向上变浅的准层序,而粒级向上变粗的准层序不发育。河流相准层序界面是河道砂体底部的冲刷侵蚀面,在粒级向上变粗的泛滥平原-决口扇或决口河道沉积中,准层序界面为暴露过泥岩与上部洪水期的暗色泥岩间的界面。将河流相准层序与短期基准面旋回进行精细的分析与对比认为,二者在层序地层学级次划分中时限相当,发育时间为0.01~0.05Ma;二者的界面是相同的,均为河道砂体底部的冲刷侵蚀面或者是暴露过泛滥平原泥岩、根土岩等。河流相中准层序与短期基准面旋回其实是相同时间内沉积的一套相同的沉积体,二者的不同只是分析的角度不同,其实质内容是一致的,即在曲流河短期基准面升降变化过程中,所保留下来的沉积物总是相对河水位是向上变浅的,由位于河水面以下的河道或边滩砂体向上变浅至河水面之上的天然堤、泛滥平原泥岩,此相序特征也正与准层序向上变浅的定义相同。     

西太平洋海山磷酸盐的常量、微量和稀土元素地球化学研究

本文对主要取自于西太平洋我国调查区内不同海山、不同水深、不同产状的13个磷酸盐样品进行了常量、微量和稀土元素测定,以探讨与大洋富钴结壳密切伴生的磷酸盐的常、微量和稀土元素地球化学的特征。分析结果表明,调查区磷酸盐中主要氧化物的平均值与赤道太平洋的相近,暗示两者可能有相似的形成环境和形成机制。磷酸盐中微量元素Sr、Ba、Co、Cu、Ni及U丰度分别变化于862×10~(-6)～2181×10~(-6)、29×10~(-6)～3429×10~(-6)、6.3×10~(-6)～115×10~(-6)、23×10~(-6)～263×10~(-6)、12×10~(-6)～825×10~(-6)及4×10~(-6)～11×10~(-6),丰度多数低于泥质岩平均值,其CaO/P_2O_5、F/CO_2、Sr/P_2O_5值及常量、微量元素间的相关关系,清晰地显示了磷酸盐的种类、成分与结构、形成的地质背景和元素的主要组合特征。磷酸盐的稀土丰度为136.50×10~(-6)～853.70×10~(-6);Ce~*变化于0.01～0.18之间;(Ce/Yb)_N值变化于0.01～0.21之间。研究证实,不同产状磷酸盐的稀土元素配分模式基本一致,曲线相互平行,基本不呈现交叉现象,均呈Ce强烈亏损,轻、重稀土分馏程度大及重稀土富集的型式。调查区、赤道太平洋、中太平洋磷酸盐的稀土元素丰度、Ce~*、Ce/Yb值以及它们与海水稀土元素配分模式相似的特征,也进一步显     

Hydrothermal Alteration Zoning and Kinetic Process of Mineral-Water Interactions

This study reports the kinetic experimental results of albite in water and in KCI solution at 22 MPa in the temperature range of 25 to 400℃. Kinetic experiments have been carried out in an open flow-through reaction system (packed bed reactor). Albite dissolution is always incongruent in water at most temperatures, but becomes congruent at 300℃ (close to the critical point 374℃). At temperatures from 25 to 300℃, the incongruent dissolution of albite is reflected by the fact that sodium and aluminum are easily dissolved into water; from 300 to 400℃ it is reflected by silicon being more easily dissolved in water than Al and Na. Maximum albite dissolution rates in the flow hydrothermal systems have been repeatedly observed at 300℃, independent of flow rates.The kinetic experiments of albite dissolution in a KCl aqueous solution (0.1 mol KCl) indicate that the dissolution rate of albite increases with increasing temperature. Maximum silicon release rates of albite have been observed at 400℃, while ma     

Characteristics and Genetic Analysis of the Deep-buried Weathered-crust Karst Hydrocarbon Reservoirs of the Lower Paleozoic Group in the Tarim Basin

The genetic analysis of the deep-buried reservoirs of the Lower Paleozoic carbonate rocks in the Tarim basin is a difficult task involving many factors. Firstly, the object of study is carbonate rocks, which have undergone a long term of modification. Secondly, the rocks are deeply buried with depths of 3800-7000 m in the Tarim basin. The primary reservoir properties formed in the deposition have been strongly modified during the deep burial process. Concurrently, the different burial depths in different areas result in diversities of burial temperature, pressure, underground water, hydrochemistry and various physicochemical changes, which further lead to differences in the diagenetic type, diagenetic property, diagenetic degree and their impacts on the reservoir properties. The Lower Paleozoic Cambrian and Ordovician carbonate reservoirs in the Tarim basin can be grouped into four types, i.e., paleo-weathered-crust reservoirs, reef reservoirs, buried karst reservoirs and dolomite reservoirs. This paper