Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.     

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

牛庄洼陷沙河街组超压系统发育特征及其演化

东营凹陷牛庄洼陷沙河街组发育有超压系统,这对油气运移和聚集过程有着重要的影响。在对超压系统现今发育特征研究的基础上,本文运用约束下数值模拟方法对牛庄洼陷超压系统的演化规律进行研究,并探讨了超压系统的主要形成机制。牛庄洼陷在沙河街组四段、沙河街组三段的下亚段和中亚段存在着超压系统,最大压力系数可以达到1.8,最大剩余压力超过了20MPa。自沙三段上亚段沉积期开始,超压系统开始发育。到东营组沉积期末,超压系统经历了大约10Ma的泄压过程。自新近系馆陶组沉积期,超压系统再次迅速增压,逐渐接近现今发育状况。上覆地层沙三段上亚段高沉积速率导致了超压系统的形成和早期剩余压力的增加,而水热增压和烃类物质大量生成联合造成超压系统晚期迅速增压。超压系统演化规律揭示出在油气主要运移期研究区古异常流体压力的分布状况,这为进一步开展牛庄洼陷油气运移和聚集过程的动力学研究提供了理论依据。     

塔里木西部地区古生代断裂活动的方式和机制

基于系统的地震剖面解释及其与塔中地区的对比,本文探讨了塔里木西部地区古生代断裂活动的方式和机制。玛东断裂带是一条宽阔的北东向盖层滑脱型褶皱冲断带,前展式向东南扩展,冲断作用发生在奥陶纪末。巴东断裂(吐土休克Ⅱ号断裂)为北西向基底卷入型冲断带,奥陶纪末和中二叠世末发生冲断。巴西断裂和塔参2井南断裂是海西期的正断层。塔里木古板块古生代的发育受邻侧的造山带演化制约,近东西向和北东向断裂奥陶纪末的冲断是继承基底构造发育的。塔中地区的近北西向断裂是晚寒武世的新生断裂,加里东运动可分为两幕:奥陶纪末的冲断(艾比湖运动)和晚志留-中泥盆世的冲断-走滑,后者向西明显减弱。塔里木西部的部分北西向断裂(如康西断裂)可归入塔中北西向断裂系。北东向的玛东断裂带是其西的向北(东)冲断的吐木休克断裂带与其东的向南偏东冲断的塔中8-1井——塔中5井断裂带之间的调节断层。     

库车坳陷东部山前带古近系不同体系域内扇三角洲沉积砂体的对比研究

通过对塔里木盆地库车坳陷南天山山前带克孜勒努尔沟与依奇克里克野外露头沉积相的精细研究,结合山前带大量地震剖面分析与迪那201井、东秋5井等多口钻井测井相和岩心精细描述,将古近系库姆格列木群划分为2个层序。层序2低位域以冲积扇沉积为主,自湖侵体系域始,研究区广泛发育退积与进积型扇三角洲沉积。库姆格列木群层序2湖侵体系域内扇三角洲平原砂体以正韵律沉积为主,砂砾岩占地层厚度的(68.4～87)%;扇三角洲前缘砂体正、反韵律均有分布,砂砾岩占地层的百分比有所降低,为(55.2～77)%。高位体系域内主要发育以反韵律砂体为主的扇三角洲前缘沉积。古近系苏维依组只发育一个层序,其低位体系域的砂体为扇三角洲平原与前缘的分流河道砂体,湖侵体系域内扇三角洲前缘砂体正、反韵律均发育,高位体系域内主要发育扇三角洲前缘沉积,以反韵律砂体为主,正韵律砂体相对较少。对比苏维依组不同体系域内砂体储集性,湖侵域内砂体优于高位域内砂体。扇三角洲沉积体中有利储集砂体首选为湖侵体系域内的扇三角洲前缘水下分流河道和河口坝砂体,次之为低位域扇三角洲前缘(平原)分流河道砂体,最后是高位域内的河口坝及席状砂沉积砂体。特别要指出:低位体系域或者湖侵体系域底部发育的扇三角洲前缘(平原)分流河道砂体(底砂砾岩)被快速湖侵的较厚的暗色泥岩所覆盖,可形成较好储集场所。     

Flexural isostatic response of the Alps to increased Quaternary erosion recorded by foreland basin remnants,SE France

We test the hypothesis that flexural isostatic compensation of the mass removed by enhanced Quaternary erosion is responsible for uplift of the Western European Alps and their forelands. We use two well‐preserved and well‐dated (1.8 Ma) abandonment surfaces of foreland basin remnants in SE France (the Chambaran and Valensole plateaux) as passive benchmarks for tilting of the foreland. Estimating their initial slope from morphometric scaling relationships, we determine bulk post‐depositional tilting of 0.5–0.8% for these surfaces. The calculated isostatic response of the Alpine lithosphere to erosional unloading, using the method recently proposed by Champagnac et al. [Geology 35 (2007) 195–198] , yields a predicted tilting of 0.3–0.4% in the considered areas, explaining approximately half of the determined post‐depositional tilting. Such long‐term deformation being insensitive to cyclic loading/unloading because of glaciations, we suspect the other half to be related to as yet undetermined long‐wavelength and long‐lived tectonic process(es).     

亚洲中部干旱区在20世纪两次暖期的表现

利用亚洲中部干旱区1901-2002年近100 a气温及北半球海平面气压、冬季西伯利亚高压强度指数、西风指数资料,分析了20世纪全球变暖的两个较明显时期在该干旱区的响应特征,以及大气环流变化和太阳活动对干旱区气温异常的影响.结果表明:亚洲中部干旱区对20世纪全球发生的两次暖期的响应特征是有显著差异的.对1920-1940年代全球发生的第一次暖期,亚洲中部干旱区整体并没有响应,仅在其东部的季风影响边缘区有响应;而对1970年代以后发生的第二次暖期,亚洲中部干旱区整体都作出了响应.冰岛低压的异常加深、同时北大西洋亚速尔高压的显著增强,西伯利亚高压强度指数的异常减弱,以及西风指数的异常增强是导致亚洲中部干旱区气温偏高的可能原因,可以初步解释研究区整体对20世纪全球两次暖期响应不同的原因.太阳活动作为外部影响因子之一,对干旱区气温的影响是阶段性的,且在百年时间尺度上,二者并没有显著的相关性.     

双液静压注浆在丰沙线35号桥卵漂石地层的应用

在丰沙线35号桥加固工程的4、5号墩钻孔灌注桩施工中,采用回转滚刀钻进卵漂石地层,为确保孔壁稳定,对桩孔壁进行了双液注浆.在注浆孔成孔、压浆管安放、孔口架桥封堵及双液压浆过程中遇到了较多棘手问题,经施工现场多次试验和改进,解决了双液浓度及注入配比、架桥封堵孔口、双液分离注浆、窜浆处理和合理压浆量控制等技术难题,并取得了理想的注浆效果,确保了钻孔灌注桩顺利进行.     

安徽月山岩体的锆石SHRIMP U-Pb定年及其意义

月山岩体是长江中下游成矿带中安庆-贵池矿集区内月山矿田中最重要的中酸性侵入岩体.本文对月山岩体主要岩石--闪长岩进行了锆石SHRIMP U-Pb定年,得到年龄值为138.7±0.5Ma,表明岩体形成于早白垩世.该结果与铜陵等地的高钾钙碱性中酸性侵入岩的形成时代类似,但早于月山矿田内的花岗质岩体和庐枞盆地、宁芜盆地中的岩浆岩.在综合区内已有的岩石学、地球化学和成矿年代学资料的基础上,认为月山矿田内的铜金铁成矿作用与月山岩体的形成有着密切的成因联系,二者在时间上是一个连续的过程,皆发生于燕山期,成岩成矿作用过程发生于区域挤压-拉张过渡的构造背景.