Impact of the LMDZ atmospheric grid configuration on the climate and sensitivity of the IPSL-CM5A coupled model

The IPSL-CM5A climate model was used to perform a large number of control, historical and climate change simulations in the frame of CMIP5. The refined horizontal and vertical grid of the atmospheric component, LMDZ, constitutes a major difference compared to the previous IPSL-CM4 version used for CMIP3. From imposed-SST (Sea Surface Temperature) and coupled numerical experiments, we systematically analyze the impact of the horizontal and vertical grid resolution on the simulated climate. The refinement of the horizontal grid results in a systematic reduction of major biases in the mean tropospheric structures and SST. The mid-latitude jets, located too close to the equator with the coarsest grids, move poleward. This robust feature, is accompanied by a drying at mid-latitudes and a reduction of cold biases in mid-latitudes relative to the equator. The model was also extended to the stratosphere by increasing the number of layers on the vertical from 19 to 39 (15 in the stratosphere) and adding relevant parameterizations. The 39-layer version captures the dominant modes of the stratospheric variability and exhibits stratospheric sudden warmings. Changing either the vertical or horizontal resolution modifies the global energy balance in imposed-SST simulations by typically several W/m² which translates in the coupled atmosphere-ocean simulations into a different global-mean SST. The sensitivity is of about 1.2 K per 1 W/m² when varying the horizontal grid. A re-tuning of model parameters was thus required to restore this energy balance in the imposed-SST simulations and reduce the biases in the simulated mean surface temperature and, to some extent, latitudinal SST variations in the coupled experiments for the modern climate. The tuning hardly compensates, however, for robust biases of the coupled model. Despite the wide range of grid configurations explored and their significant impact on the present-day climate, the climate sensitivity remains essentially unchanged.     

Tectonically controlled sedimentation: impact on sediment supply and basin evolution of the Kashafrud Formation (Middle Jurassic,Kopeh-Dagh Basin,northeast Iran)

The Kashafrud Formation was deposited in the extensional Kopeh-Dagh Basin during the Late Bajocian to Bathonian (Middle Jurassic) and is potentially the most important siliciclastic unit from NE Iran for petroleum geology. This extensional setting allowed the accumulation of about 1,700 m of siliciclastic sediments during a limited period of time (Upper Bajocian–Bathonian). Here, we present a detailed facies analysis combined with magnetic susceptibility (MS) results focusing on the exceptional record of the Pol-e-Gazi section in the southeastern part of the basin. MS is classically interpreted as related to the amount of detrital input. The amount of these detrital inputs and then the MS being classically influenced by sea-level changes, climate changes and tectonic activity. Facies analysis reveals that the studied rocks were deposited in shallow marine, slope to pro-delta settings. A major transgressive–regressive cycle is recorded in this formation, including fluvial-dominated delta to turbiditic pro-delta settings (transgressive phase), followed by siliciclastic to mixed siliciclastic and carbonate shoreface rocks (regressive phase). During the transgressive phase, hyperpycnal currents were feeding the basin. These hyperpycnal currents are interpreted as related to important tectonic variations, in relation to significant uplift of the hinterland during opening of the basin. This tectonic activity was responsible for stronger erosion, providing a higher amount of siliciclastic input into the basin, leading to a high MS signal. During the regressive phase, the tectonic activity strongly decreased. Furthermore, the depositional setting changed to a wave- to tide-dominated, mixed carbonate–siliciclastic setting. Because of the absence of strong tectonic variations, bulk MS was controlled by other factors such as sea-level and climatic changes. Fluctuations in carbonate production, possibly related to sea-level variations, influenced the MS of the siliciclastic/carbonate cycles. Carbonate intervals are characterized by a strong decrease of MS values indicates a gradual reduction of detrital influx. Therefore, the intensity of tectonic movement is thought to be the dominant factor in controlling sediment supply, changes in accommodation space and modes of deposition throughout the Middle Jurassic sedimentary succession in the Pol-e-Gazi section and possibly in the Kopeh-Dagh Basin in general.     

Analysis of the effect of trees on block propagation using a DEM model: implications for rockfall modelling

The objective of this research was to use numerical models based on mechanical approaches to improve the integration of the protective role of forests against rockfall into block propagation models. A model based on the discrete element method (DEM) was developed to take into account the complex mechanical processes involved during the impact of a block on a tree. This modelling approach requires the definition of many input parameters and cannot be directly integrated into block propagation models. A global sensitivity analysis identified the leading parameters of the block kinematics after impact (i.e. block energy reduction, trajectory changes, and rotational velocity): the impact velocity, the tree diameter, and the impact point horizontal location (i.e. eccentricity). Comparisons with the previous experimental and numerical studies of block impacts on trees demonstrated the applicability of the DEM model and showed some of the limitations of earlier approaches. Our sensitivity analysis highlights the significant influence of the impact velocity on the reduction of the block’s kinetic energy. Previous approaches usually also focus on parameters such as impact height, impact vertical incidence, and tree species, whose importance is only minor according to the present results. This suggests that the integration of forest effects into block propagation models could be both improved and simplified. The DEM model can also be used as an alternative to classical approaches for the integration of forest effects by directly coupling it with block propagation models. This direct coupling only requires the additional definition of the location and the diameter of each tree. Indeed, the input parameters related to the mechanical properties of the stem and the block/stem interaction in the DEM model can be set to average values because they are not leading parameters. The other input parameters are already defined or calculated in the block propagation model.     

Assessment of microbiological and biochemical properties of dairy sewage sludge

The rational utilisation of sludge as organic matter application into the soil permits enrichment in nutrients such as nitrogen and phosphorus. As dairy sewage sludge contains large amounts of organic matter and minerals, utilisation of such sludge in agriculture appears to be a noteworthy proposal. However, such waste can also be a source of toxic substances, heavy metals, inhibitors, xenobiotics and potentially pathogenic microorganisms. Therefore, it is so important to monitor its microbiological and biochemical properties in aspect of the safety for human health, natural environment preservation and a suitable level of agricultural production maintenance. The objective of study was the estimation of selected microbiological, biochemical and chemical properties of activated sludge (AS) and waste activated sludge (WAS) originating from the dairy sewage treatment plant. Nitrification and ammonification rates, respiratory, dehydrogenases, acid phosphatase, alkaline phosphatase, protease and urease activities were at significantly higher levels in the WAS than in the AS. The pH value of the AS and WAS oscillated within the range of neutral reaction.     

Remotely sensed rivers in the Anthropocene: state of the art and prospects

The rivers of the world are undergoing accelerated change in the Anthropocene, and need to be managed at much broader spatial and temporal scales than before. Fluvial remote sensing now offers a technical and methodological framework that can be deployed to monitor the processes at work and to assess the trajectories of rivers in the Anthropocene. In this paper, we review research investigating past, present and future fluvial corridor conditions and processes using remote sensing and we consider emerging challenges facing fluvial and riparian research. We introduce a suite of remote sensing methods designed to diagnose river changes at reach to regional scales. We then focus on identification of channel patterns and acting processes from satellite, airborne or ground acquisitions. These techniques range from grain scales to landform scales, and from real time scales to inter-annual scales. We discuss how remote sensing data can now be coupled to catchment scale models that simulate sediment transfer within connected river networks. We also consider future opportunities in terms of datasets and other resources which are likely to impact river management and monitoring at the global scale. We conclude with a summary of challenges and prospects for remotely sensed rivers in the Anthropocene. © 2019 John Wiley & Sons, Ltd.     

Inversion of provenance data and sediment load into spatially varying erosion rates

Sediment fingerprinting methods aim to determine the relative contribution of different source areas in detrital sediments based on natural properties – fingerprints – of the source areas. Here, we use U/Th–Pb age signatures as fingerprints, assuming that the age signal is not altered during erosion–transportation–deposition events, and given that recent technological advances enable precise dating of large amounts of grains. We introduce a formal inversion method that allows to disentangle the amalgamation of source contributions in detrital zircon data and enables to convert this information into an erosion rate map starting from the spatial distribution of zircon age signatures. Relying on the least-squares method and using prior and covariance information to deal with non-uniqueness, we show, using synthetic and natural examples, that we are able to retrieve erosion rate patterns of a catchment when the age distribution and zircon fertility for each source area are well known. Moreover, we show that not only zircon age fingerprints but also other tracers such as mineral content can be used. Furthermore, we found that adding data from samples taken at the outlet of tributaries improves the estimation of erosion rate patterns. We conclude that the least squares inverse model applied to detrital data has great potential for investigating erosion rates. © 2020 John Wiley & Sons, Ltd.     

On the small-scale fractal geometrical structure of a living coral reef barrier

The topographical complexity of coral reefs is of primary importance for a number of hydrodynamical and ecological processes. The present study is based on a series of high-resolution seabottom elevation measurements along the Maupiti Barrier Reef, French Polynesia. Several statistical metrics and spectral analysis are used to characterize the spatial evolution of the coral geometrical structure from the reef crest to the backreef. A consistent fractal-like power law exists in the spectral density of bottom elevation for length scales between 0.1 and 7 m, while at larger scale, the reef structure shows a different pattern. Such a fine characterization of the reef geometrical structure provides key elements to reconstruct the reef history, to improve the representation of reef roughness in hydrodynamical models and to monitor the evolution of coral reef systems in the context of global change. © 2020 John Wiley & Sons, Ltd.     

The differential rotation of ε Eri from MOST data

From high-precision MOST photometry spanning 35 days the existence of two spots rotating with slightly differing periods is confirmed. From the marginal probability distribution of the derived differential rotation parameter k its expectation value as well as confidence limits are computed directly from the data. The result depends on the assumed range in inclination i, not on the shape of the prior distributions. Two cases have been considered: (a) The priors for angles, inclination i of the star and spot latitudes β 1,2, are assumed to be constant over i, β 1, and β 2; (b) the priors are assumed to be constant over cos i, sin β 1, and sin β 2. In both cases the full range of inclination is considered: 0° ≤ i ≤ 90°. Scalefree parameters, i. e. periods and spot areas (in case of small spots) are taken logarithmically. Irrespective of the shape of the prior, k is restricted to 0.03 ≤ k ≤ 0.10 (1 σ limits). The inclination i of the star is photometrically ill-defined. (© 2007 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)