Cutting of Phragmites australis as a lake restoration technique: Productivity calculation and nutrient removal in Wuliangsuhai Lake, northern China

Reed is one of the most frequent and dominant species in wetlands all over the world, with common reed (Phragmites australis (Cav.) Trin. ex Steud.) as the most widely distributed species. In many wetlands, P. australis plays a highly ambivalent role. On the one hand, in many wetlands it purifies wastewater, provides habitat for numerous species, and is a potentially valuable raw material, while on the other hand it is an invasive species which expands aggressively, prevents fishing, blocks ditches and waterways, and builds monospecies stands. This paper uses the eutrophic reed-swamp of Wuliangsuhai Lake in Inner Mongolia, northern China, as a case to present the multiple benefits of regular reed cutting. The reed area and aboveground biomass production are calculated based on field data. Combined with data about water and reed nutrient content, the impact of reed cutting on the lake nutrient budget (N and P) is investigated. Currently, at this lake around 100,000 tons of reed are harvested in winter annually, removing 16% and 8% of the total nitrogen and phosphorus influx, respectively. Harvesting all available winter reed could increase the nutrient removal rates to 48% and 24%, respectively. We also consider the effects of summer harvesting, in which reed biomass removal could overcompensate for the nutrient influx but could potentially reduce reed regrowth.     

Olivine phenocrysts in some Cameroonian Basalts—implications for primary magma composition

Summary The chemical composition of olivine phenocrysts was determined for 13 basaltic samples taken from the central part of the Cameroon Volcanic line to estimate the compositions of the primary olivine phenocrysts and the primary magmas. The Mg/(Mg + Fe) ratios of the olivines attain 0.91, though many of the magnesian olivines are identified on a textural basis as xenocrysts from peridotite inclusions. Most magnesian olivine phenocrysts have Mg/(Mg + Fe) ratios of 0.87–0.88 and NiO contents of 0.32–0.35 wt %. The NiO versus Mg/(Mg + Fe) ratios of the olivines can be used to estimate the compositions of the primary phenocrysts in a range of Mg/(Mg + Fe) = 0.88–0.90. Assuming the Fe(3)/(total Fe) ratios of the magmas are 0.17–0.25, which is estimated from the Fe-Mg partitioning between plagioclase and groundmass, the compositions of the primary magmas were obtained from the Fe²⁺-Mg partition equilibrium with the primary olivine phenocrysts. The primary magmas of the Cameroonian basalts have 13.5 ± 4.0 wt MgO, which is similar to the compositions of basalts with highest MgO contents reported so far from the Cameroon volcanic line.

---

Olivin Kristalle in einigen Basalten aus Kamerun: Hinweise auf die Zusammensetzung des primitiven Magmas

Zusammenfassung Die chemische Zusammensetzung von Olivin Phenokristallen wurde in 13 Basalt-Proben, die vom Zentralteil .des Kamerun-Vulkangürtels stammen, bestimmt, um Hinweise auf die Zusammensetzung der primären Olivineinsprenglinge and des primären Magmas zu erlangen. Die Mg/(Mg + Fe) Verhältnisse der Olivine reichen bis 0.91, obwohl viefle dieser Mg-Olivine auf Grund textureller Kriterien als aus Peridotit-Einschlüssen stammende Xenokristalle zu identifizieren sind. Die Mg/(Mg + Fe) Verhältnsse der Hauptmasse der Olivin-Phenokristalle liegen im Bereich von 0.87 bis 0.88, die Ni0 Gehalte zwischen 0.32 und 0.35 Gew %. Die Ni0 gegen Mg/(Mg + Fe) Verhältnisse eignen sich zur Abschätzung der Zusammensetzung der primären Phenokristalle, solange die Mg/(Mg + Fe) Verhältnisse im Bereich von 0.88 bis 0.90 liegen. Die Zusammensetzung des Primärmagmas wurde mittels der Fe²⁺-Mg-Verteilung zwischen dem Magma und den sich mit dem Magma im Gleichgewicht befindlichen primären Olivinkristallen unter der Annahme eines Fe³⁺/Fe total Verhältnisses von 0.17–0.25, welches sich aus der Mg-Fe Verteilung zwischen Plagioklas und Grundmasse ergibt, bestimmt. Demnach ergibt sich für das primäre Magma der Kamerun Basalte ein MgO Gehalt von 13.5 + 4.0 Gew%. Dieser Wert ist mit der Zusammensetzung von Basalten mit höchsten MgO-Gehalten, wie sie bisher vom Kamerun-Vulkangürtel berichtet worden sind, vergleichbar.

---

---

With 6 Figures     

Geochronological constraints on the evolution of the Periadriatic Fault System (Alps)

Fault rocks from various segments of the Periadriatic fault system (PAF; Alps) have been directly dated using texturally controlled Rb-Sr microsampling dating applied to mylonites, and both stepwise-heating and laser-ablation ⁴⁰Ar/³⁹Ar dating applied to pseudotachylytes. The new fault ages place better constraints on tectonic models proposed for the PAF, particularly in its central sector. Along the North Giudicarie fault, Oligocene (E)SE-directed thrusting (29-32 Ma) is currently best explained as accommodation across a cogenetic restraining bend within the Oligocene dextral Tonale-Pustertal fault system. In this case, the limited jump in metamorphic grade observed across the North Giudicarie fault restricts the dextral displacement along the kinematically linked Tonale fault to ~30 km. Dextral displacement between the Tonale and Pustertal faults cannot be transferred via the Peio fault because of both Late Cretaceous fault ages (74-67 Ma) and sinistral transtensive fault kinematics. In combination with other pseudotachylyte ages (62-58 Ma), widespread Late Cretaceous-Paleocene extension is established within the Austroalpine unit, coeval with sedimentation of Gosau Group sediments. Early Miocene pseudotachylyte ages (22-16 Ma) from the Tonale, Pustertal, Jaufen and Passeier faults argue for a period of enhanced fault activity contemporaneous with lateral extrusion of the Eastern Alps. This event coincides with exhumation of the Penninic units and contemporaneous sedimentation within fault-bound basins.     

Improved Representation of Land-surface Heterogeneity in a Non-hydrostatic Numerical Weather Prediction Model

This study focuses on the relevance of accurate surface parameters, in particular soil moisture, and of parameterizations for heterogeneous land surfaces, for the prediction of sensible and latent heat fluxes by a mesoscale weather forecast model with horizontal grid resolution of 7 km. The analysis is based on model integrations for a 30-day period, which are compared both to flux measurements obtained from the LITFASS-2003 field experiment and to high-resolution-model (1-km grid spacing) results. At first, the relevance of improved parameter sets and input data compared to usual operational practice for an accurate prediction of near-surface fluxes is shown and discussed. It is demonstrated that an observation-based land-surface assimilation scheme leads to an improved soil moisture analysis, which is shown to be essential for the realistic simulation of surface fluxes. Secondly, the implementation of two efficient parameterization strategies for subgrid-scale variability of the surface, the mosaic and the tile approach, is presented. Using these methods, the simulations are in better agreement with measurements than simulations with simple aggregation methods that use effective surface parameters. Integrations with the mosaic approach reproduce high resolution simulations very well and more accurately than simulations with the tile method. Finally, the high resolution simulations are analyzed to justify and discuss the approximations underlying both methods.     

Defining rock types by composition ranges

Moderate increase in the number of composition ranges used in the definition of a rock type drastically reduces the number of specimens qualifying for membership in the type. Classifications based on more than a very small number of rather broad ranges will be unrealistically exclusive.     

An effect of closure on the structure of principal components

The principal components transformation generates, from any data array, a new set of variables—the scores of the components—characterized by a total variance exactly equal to that of the initial set. It is in this sense that the transformed variables are said to contain, preserve, or account for, the variance of the original set. The scores, however, are uncorrelated. In the course of the transformation, what becomes of the strong interdependence of variance and covariance so characteristic of closed arrays? The question seems to have attracted little attention; we are aware of no study of it in the earth sciences. Experimental work reported here shows quite clearly that the overall equivalence of variance and covariance imposed by closure, though absent from the component scores,may emerge in relations between the coefficientsof each of the lower-order components; if the raw data are complete rock analyses, the sum of all the covariances of the coefficients of such a component is negative, and is very nearly equal to the sum of all the variances in absolute value. (In all cases so far examined, the absolute value of the first sum is a little less than that of the second.) The principal components transformation provides an elegant escape from closure correlation if a petrographic problem can be restated entirely in terms of component scores, but not if a physical interpretation of the component vectors is required.     

Introduction: Interaction between environment and fisheries—The role of stakeholder participation

This paper is an introduction to the special issue on a role of participation in dealing with the interactions between environment and fisheries. In this introduction, we explore the recent discussion on the ecosystem-based approach to fisheries management (EBAFM) and extract important points for implementation of EBAFM from the social science literature on participation and participatory processes in environmental management. The introduction finishes by describing the analytical framework for studying participatory processes.     

Mathiasite-loveringite and priderite in mantle xenoliths from the Alto Paranaíba Igneous Province,Brazil: genesis and constraints on mantle metasomatism

Alkali-bearing Ti oxides were identified in mantle xenoliths enclosed in kimberlite-like rocks from Limeira 1 alkaline intrusion from the Alto Paranaíba Igneous Province, southeastern Brazil. The metasomatic mineral assemblages include mathiasite-loveringite and priderite associated with clinopyroxene, phlogopite, ilmenite and rutile. Mathiasite-loveringite (55–60 wt.% TiO₂; 5.2–6.7 wt.% ZrO₂) occurs in peridotite xenoliths rimming chromite (～50 wt.% Cr₂O₃) and subordinate ilmenite (12–13.4 wt.% MgO) in double reaction rim coronas. Priderite (Ba/(K+Ba)< 0.05) occurs in phlogopite-rich xenoliths as lamellae within Mg-ilmenite (8.4–9.8 wt.% MgO) or as intergrowths in rutile crystals that may be included in sagenitic phlogopite. Mathiasite-loveringite was formed by reaction of peridotite primary minerals with alkaline melts. The priderite was formed by reaction of peridotite minerals with ultrapotassic melts. Disequilibrium textures and chemical zoning of associated minerals suggest that the metasomatic reactions responsible for the formation of the alkali-bearing Ti oxides took place shortly prior the entrainment of the xenoliths in the host magma, and is not connected to old (Proterozoic) mantle enrichment events.