Emarat carbonate-hosted Zn–Pb deposit, Markazi Province, Iran: A geological, mineralogical and isotopic (S, Pb) study

The Emarat deposit, with a total proved reserve of 10 Mt ore grading 6% Zn and 2.26% Pb, is one of the largest Zn–Pb deposits in the Malayer–Esfahan belt. The mineralization is stratabound and restricted to Early Cretaceous limestones and dolomites. The ore consists mainly of sphalerite and galena with small amounts of pyrite, chalcopyrite, calcite, quartz, and dolomite. Textural evidence shows that the ore has replaced the host rocks and thus is epigenetic.Sulfur isotopes indicate that the sulfur in sphalerite and galena has been derived from Cretaceous seawater through thermochemical sulfate reduction. Sulfur isotope compositions of four apparently coprecipitated sphalerite–galena pairs suggest their precipitation was under equilibrium conditions. The sulfur isotopic fractionation observed for the sphalerite–galena pairs corresponds to formation temperatures between 77 °C and 168 °C, which agree with homogenization temperatures of fluid inclusions.Lead-isotope studies indicate that the lead in galena has been derived from heterogeneous sources including orogenic and crustal reservoirs with high ²³⁸U/²⁰⁴Pb and ²³²Th/²⁰⁴Pb ratios. Ages derived from the Pb-isotope model give meaningless ages, ranging from Early Carboniferous to future. It is probable that the Pb-isotope model ages that point to an earlier origin than the Early Cretaceous host rocks are derived from older reservoirs in the underlying Carboniferous or Jurassic units, either from the host rocks or from earlier-formed ore deposits within these units.This research and other available data show that the Emarat Zn–Pb deposit has many important features of Mississippi Valley-type (MVT) lead–zinc deposits and thus we argue that it is an MVT-type ore deposit.     

NUMERICAL SIMULATION OF SEDIMENT TRANSPORT IN DYNAMIC FLOW CONDITIONS

1 INTRODUCTION Rivers as a source of life can at the same time impose devastating conditions on the environment. It is , therefore, imperative to analyse and predict river behaviour for different given conditions and engineering activities. Therefore, the use of simulation tools in this field has become a necessity. Many computational tools for simulation of sediment transport in rivers are now available that can be used for prediction and design under different flow conditions. However, …     

Reliability and sensitivity analysis of wedge stability in the abutments of an arch dam using artificial neural network

In this study, the seismic stability of arch dam abutments is investigated within the framework of the probabilistic method. A large concrete arch dam is considered with six wedges for each abutment. The seismic safety of the dam abutments is studied with quasi-static analysis for different hazard levels. The Londe limit equilibrium method is utilized to calculate the stability of the wedges in the abutments. Since the finite element method is time-consuming, the neural network is used as an alternative for calculating the wedge safety factor. For training the neural network, 1000 random samples are generated and the dam response is calculated. The direction of applied acceleration is changed within 5-degree intervals to reveal the critical direction corresponding to the minimum safety factor. The Latin hypercube sampling (LHS) is employed for sample generation, and the safety level is determined with reliability analysis. Three sample numbers of 1000, 2000 and 4000 are used to examine the average and standard deviation of the results. The global sensitivity analysis is used to identify the effects of random variables on the abutment stability. It is shown that friction, cohesion and uplift pressure have the most significant effects on the wedge stability variance.

     

Characterization of regional hydrological drought using improved precipitation records under multi-auxiliary information

Theoretical and Applied Climatology - Drought is a complex natural hazard that has been recurrently occurred in many regions across the globe. Therefore, precise drought characterization and its...     

Cluster and R-mode factor analyses on soil geochemical data of Masjed-Daghi exploration area, northwestern Iran

Masjed-Daghi is located in Julfa sheet (1:100,000 series) in the northwest of Iran. The area consists of a very likely gold mineralization bearing epithermal mineralization which appears to be associated with a porphyry Cu–Mo system at deeper levels. Ninety-three soil samples were collected and analyzed for 13 elements (Au, Mo, Cu, Pb, Sn, Ag, Zn, Cr, Mn, Ba, Be, Ni, Co) by using emission spectrometry and atomic absorption spectrophotometry. The data were processed and interpreted using univariate and multivariate statistical analyses. The distribution of the majority of variables is slightly to moderately positively skewed which can be interpreted by log-normal model. Only Ni, Be, and Mn show normal distribution. Based on cluster analysis, the variables can be classified into two main groups. The first group consists of the main ore forming elements such as Au, Ag, and Ba which belong to epithermal system and Mo, Sn, and Cu which have more affiliation to porphyry mineralization. The principal component analysis extracted three factors. These factors calculated using varimax rotated R-mode factor loading matrix account for more than 65 % of the total variance. The first factor represents the main constituents of the epithermal system (Au, Ag, Ba) and its geochemical halo at the northeast of the study area. The second factor represents the main constituents of the porphyry system (Cu, Mo, Sn) and its geochemical halo in the western part of the study area which is overlapped with the volcanic rocks affected by local intrusions with higher alteration overprint. The third factor, however with less significance, represents Pb and Zn which are not the main ore constituents but can be considered as pathfinder elements. The results have been used to locate hidden orebodies using presented factor score mapping.     

Changes in precipitation extremes over arid to semiarid and subhumid Punjab,Pakistan

Asymmetrical monsoons during the recent past have resulted into spatially variable and devastating floods in South Asia. Analysis of historic precipitation extremes record may help in formulating mitigation strategies at local level. Eleven indices of precipitation extremes were evaluated using RClimDex and daily time series data for analysis period of 1981–2010 from five representative cities across Punjab province of Pakistan. The indices include consecutive dry days, consecutive wet days, number of days above daily average precipitation, number of days with precipitation ≥10 mm, number of days with precipitation ≥20 mm, very wet days, extremely wet days, simple daily intensity index, maximum 1-day precipitation quantity, maximum 5 consecutive day precipitation quantity, and annual total wet-day precipitation. Mann-Kendall test and Sen’s slope extremes were used to detect trends in indices. Droughts and excessive precipitation were dictated by elevation from mean sea level with prolonged dry spells in southern Punjab and vice versa confirming spatial trends for precipitation extremes. However, no temporal trend was observed for any of the indices. Summer in the region is the wettest season depicting contribution of monsoons during June through August toward devastating floods in the region.     

Groundwater pesticides residue in the southwest of Iran-Shushtar plain

Study area with an area of about 415 km² is located from 31°40′ to 32°05′ northern latitudes and 48°45′ to 49°00′ eastern longitudes 85 km to the north-east of Ahwaz city, in the north of Khuzestan province, and south west of Iran. The purpose of this study is: (1) the determination of the pesticides concentration in the groundwater of the Shushtar plain (Mian-Ab) and (2) the assessment of geology, hydrogeology and anthropogenic activities impacts the groundwater quality. Thirty-seven groundwater samples were taken from product wells based on the standard methods. A simple and efficient automated method for extraction and preconcentration was used. In this method, a pyrrole-based polymer was synthesized and applied as an efficient sorbent for micro-solid-phase extraction. After extraction, analytes were desorbed in ethyl acetate and analyzed using gas chromatography–flame. The study area is surrounded by Aghajari Formation dominated by silt and clay sediments and the Bakhtiari Formation dominated by sand and gravel. Existence of these formations affects the aquifer sediments and the hydrogeological properties. In the study area, the sediments grade from gravel and sand in the north and east into silt and clay to the south and west, respectively. The topsoil in the south of the study area contains more clay sediments. In this study, the concentration of two common herbicides, i.e., 2,4-D and clodinafop propargyl and two pesticides, i.e., permethrin and diazinon, in the groundwater of Mian-Ab aquifer was assessed. Chemical analysis results showed that the 2,4-D residue in the groundwater has the highest concentration (15 ppm). About 50% of the samples have concentration values more than the maximum contamination level based on EPA drinking standard. The pesticides concentrations decrease from the north to the south of the study area. Pesticides influx to the groundwater in the south of the area is prevented or diminished due to the specific geological situation and soil type. Distribution pattern of population centers, which increase to the north of the study area, and the role of groundwater as the main source of drinking water are two important issues that must be considered in management of pesticides use in the area.     

Rare earth element and stable isotope (O, S) geochemistry of barite from the Bijgan deposit, Markazi Province, Iran

The Bijgan barite deposit, which is located northeast of Delijan in Markazi Province of Iran, occurs as a small lenticular body at the uppermost part of an Eocene volcano-sedimentary rock unit. The presence of fossiliferous and carbonaceous strata suggests that the host rocks were deposited in a quiet marine sedimentary environment. Barite, calcite, iron oxides and carbonaceous clay materials are found as massive patches as well as thin layers in the deposit. Barite is marked by very low concentrations of Sr (1–2%) and total amounts of rare earth elements (REEs) (6.25–17.39?ppm). Chondrite-normalized REE patterns of barite indicate a fractionation of light REEs (LREEs) from La to Sm, similar to those for barite of different origins from elsewhere. The La_CN/Lu_CN ratios and chondrite-normalized REE patterns reveal that barite in the Bijgan deposit is enriched in LREE relative to heavy rare earth elements (HREEs). The similarity between the Ce/La ratios in the barite samples and those found in deep-sea barite supports a marine origin for barite. Lanthanum and Gd exhibit positive anomalies, which are common features of marine chemical sediments. Cerium shows a negative anomaly in most samples that was inherited from the negative Ce anomaly of hydrothermal fluid that mixed with seawater at the time of barite precipitation. The δ¹⁸O values of barites show a narrow range of 9.1–11.4‰, which is close to or slightly lower than that of contemporaneous seawater at the end of the Eocene. This suggests a contribution of oxygen from seawater in the barite-forming solution. The δ³⁴S values of barites (9.5–15.3‰) are lower than that of contemporaneous seawater, which suggests a contribution of magmatic sulfur to the ore-forming solution. The oxygen and sulfur isotope ratios indicate that submarine hydrothermal vent fluids are a good analog for solutions that precipitated barite, due to similarities in the isotopic composition of the sulfates. The available data including tectonic setting, host rock characteristics, REE geochemistry, and oxygen and sulfur isotopic compositions support a submarine hydrothermal origin for the Bijgan barite deposit. At the seafloor, barite deposition occurred where ascending Ba-bearing hydrothermal fluids encountered seawater. Sulfate was derived from the sulfate-bearing marine waters, and, to a lesser extent, by oxidized H₂S, which was derived from magmatic hydrothermal fluids.     

Plates on saturated porous elastic foundations

The problem of plates on consolidating soil is considered. Biot's three-dimensional consolidation theory, the generalization of Terzaghi's model, is employed to account for the consolidation process. A mathematical model is developed and the differential equations governing the system together with the proper boundary conditions are derived. A variational formulation of the problem and a convenient approximate method of solution are also presented. For numerical analysis, the problem of a rectangular plate on consolidating soil under various loading conditions is numerically solved and the effects of various physical factors on the settlements and the pore pressures are studied.     

The Effect of Air Bubbles and Headspace on the Aqueous Concentrations of Volatile Organic Compounds in Sampling Vials

The presence of headspace and air bubbles in volatile organic analysis sampling vials lowers the actual aqueous concentration of these compounds due to the partitioning of solutes into the gaseous phase. This could make the sample invalid for analysis.
In this work, the effects of air bubbles and headspace on the aqueous concentration of 60 volatile organic compounds listed in U.S.Environmental Protection Agency (U.S. EPA) Method 8260 were evaluated experimentally and theoretically. The results showed that for air to water ratios of 1 to 20 and less, there was no significant effect on the aqueous concentrations of target organic solutes in the sampling vials. When the air to water ratio was increased to 1 to 10, the recovery rates of four organic compounds were lower than the control. Laboratory experiments on sampling vials showed that the presence of air bubbles or headspace with the volumetric air to water ratios of 1 to 20 and less do not produce any significant effect on the original concentrations for most targeted volatile organic compounds.
The experimental results also indicated that in 40 mL sampling vials with headspace range of 2 to 8 mL, the recovery rates of most volatile organic compounds with high values of Henry's law constant (> 0.01 Atm m³/mol. at 25°C) were larger than the calculated rates.