Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.     

The dominant driving force for supercontinent breakup: Plume push or subduction retreat?

Understanding the dominant force responsible for supercontinent breakup is crucial for establishing Earth's geodynamic evolution that includes supercontinent cycles and plate tectonics. Conventionally,two forces have been considered: the push by mantle plumes from the sub-continental mantle which is called the active force for breakup, and the dragging force from oceanic subduction retreat which is called the passive force for breakup. However, the relative importance of these two forces is unclear. Here we model the supercontinent breakup coupled with global mantle convection in order to address this question. Our global model features a spherical harmonic degree-2 structure, which includes a major subduction girdle and two large upwelling(superplume) systems. Based on this global mantle structure,we examine the distribution of extensional stress applied to the supercontinent by both subsupercontinent mantle upwellings and subduction retreat at the supercontinent peripheral. Our results show that:(1) at the center half of the supercontinent, plume push stress is ～3 times larger than the stress induced by subduction retreat;(2) an average hot anomaly of no higher than 50 K beneath the supercontinent can produce a push force strong enough to cause the initialization of supercontinent breakup;(3) the extensional stress induced by subduction retreat concentrates on a ～600 km wide zone on the boundary of the supercontinent, but has far less impact to the interior of the supercontinent. We therefore conclude that although circum-supercontinent subduction retreat assists supercontinent breakup, sub-supercontinent mantle upwelling is the essential force.     

The influence of the Three Gorges Reservoir regulation on a typical tributary heat budget

Reservoir regulation and local climate both affect the heat budget of tributary bay. It is difficult for traditional methods to identify the influence of different factors on heat budget quantitatively. In this paper, for analysis of the control mechanisms of the heat budget of a large reservoir tributary, the water temperature distribution, and heat budget processes of the Meixi River, a typical tributary to the Three Gorges Reservoir was measured, and a new method was used to calculate the heat content composition of the tributary bay and identify the key factor of the heat balance. The result shows significant variation in the spatial and temporal distributions of water temperatures in the Meixi River, ranging from 12.4 to 28.9 °C on the surface and 12.0 to 24.4 °C at the bottom. The total heat exchange across the air–water interface that ranges from 0.1 to 6% of the budget is not the primary control factor of the annual tributary heat budget. Rather, the change in water depth produced by regulation of the Three Gorges Reservoir is the primary control factor of the tributary heat budget in the whole year, which ranges from 72 to 99% of the budget. The water temperature difference between the main stream and tributary is the not key factor of the heat budget, which ranges from 0.1 to 28% of the heat budget.     

Geochemistry of organic matter and elements of black shale during weathering in Northern Guizhou,Southwestern China: Their mobilization and inter-connection

Different from previous studies on effect of weathering upon geochemical variation along a single weathered profile, this paper provides a new methodology validated by comparing a weathered outcrop samples and their stratigraphic counterpart un-weathered core samples in a nearby shallow borehole. This outcrop and borehole penetrated the Ordovician-Silurian Wufeng–Longmaxi shales, located in the same anticline structure in the northern part of Guizhou Province, Southern China. The mineral composition, major, trace and rare earth elements (REEs) composition and Rock-Eval parameters of outcrop and core samples were analyzed and compared. Organic matter (OM) was observed in the microscope and extracted for elements analysis. The results show that short-term weathering still has significant influence on OM, mineral and elemental composition of black shales. The elements composition shows the outcrop profile was moderately weathered. The REEs compositions do not alter much during weathering process and the REEs composition and their relative ratios still are valid for rock origin determination. The OM, mainly composed by graptolite and bitumen, even entering the highly-over thermal maturity, is still sensitive to the weathering with a systematic loss 30–50% of TOC along the outcrop profile, which suggests that the OM consumption is predominantly controlled by weathering duration and the distance from the weathering surface. In turn, OM has significant influence on the trace elements transportation behavior during weathering. Some trace elements associated with the OM such as V, Cr, Th, U, Ni and Co, change significantly in their absolute concentration during weathering, but their relative ratios do not necessarily change too much and might be still reliable proxies for paleo-environmental determination. The mobility of shale minerals during weathering is in the following order: plagioclase?>?potassium feldspar and dolomite >pyrite and OM. Short-term weathering can also result in considerable transportation of elements and significant variation of minerals content in black shale, which may pose potentially high environmental and engineering risk in the regions rich in black shale.     

Simplified formulae for designing coastal forest against tsunami run-up: one-dimensional approach

In the present study, laboratory experiments were conducted to validate the applicability of a numerical model based on one-dimensional nonlinear long-wave equations. The model includes drag and inertia resistance of trees to tsunami flow and porosity between trees and a simplified forest in a wave channel. It was confirmed that the water surface elevation and flow velocity by the numerical simulations agree well with the experimental results for various forest conditions of width and tree density. Further, the numerical model was applied to prototype conditions of a coastal forest of Pandanus odoratissimus to investigate the effects of forest conditions (width and tree density) and incident tsunami conditions (period and height) on run-up height and potential tsunami force. The modeling results were represented in curve-fit equations with the aim of providing simplified formulae for designing coastal forest against tsunamis. The run-up height and potential tsunami forces calculated by the curve-fit formulae and the numerical model agreed within ± 10% error.     

The relationship between groundwater and natural vegetation in Qaidam Basin

To accurately evaluate ecological risks trigged by groundwater exploitation, it must be clarified the relationship between vegetation and groundwater. Based on remote sensing data sets MOD13Q1, groundwater table depth (WTD) and total dissolved solids (TDS), the relationship between groundwater and natural vegetation was analyzed statistically in the main plain areas of Qaidam Basin. The results indicate that natural vegetation is groundwater-dependent in areas where WTD is less than 5.5 m and TDS is less than 7.5 g/L. Aquatic vegetation, hygrophytic vegetation and hygrophytic saline-alkali tolerant vegetation are mainly distributed in areas with WTD <1.1 m. Salt-tolerant and mesophytic vegetation mainly occur in areas with WTD of 1.4-3.5 m, while the xerophytic vegetation isprimarily present in areas where WTD ranges from 1.4 m to 5.5 m. Natural vegetation does not necessarily depend on groundwater in areas with WTD >5.5 m. For natural vegetation, the most suitable water TDS is less than 1.5 g/L, the moderately suitable TDS is 1.5-5.0 g/L, the basically suitable TDS is 5.0-7.5 g/L, and the unsuitable TDS is more than 7.5 g/L.     

区域自动气象站蓄电池异常状态判别方法

针对天津市一种常见的CAWS600型区域自动气象站对其供电及功耗进行了详细分析,利用对电池放电特性曲线的归一化处理,得到了针对12V38AH铅酸蓄电池的剩余容量估算方法,同时利用该站蓄电池工作电压的统计规律,提出了针对蓄电池工作电压的极值判定、时间/空间一致性质量控制方法,并对2017年逐10min观测数据进行检验。检验结果显示,文章提出的质量控制方法可以有效识别出蓄电池异常站点,针对2017年个站蓄电池持续放电情况可提前10d定位。