Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

不同排列方式和间隙比下双圆柱流致振动特性研究

采用基于ALE的流固耦合分析方法,将圆柱体振动模型简化为平面双自由度质量-弹簧-阻尼系统,进行了计算参数无关性分析。对不同θ角和间隙比T下的双圆柱流致振动进行数值模拟,并与单圆柱振动计算结果进行比较,得到了不同θ角和间隙比T下中心圆柱的升阻力系数、流场分布和运动轨迹变化情况。通过分析发现小间隙比下由于两圆柱间的相互干扰,改变了中心圆柱的尾涡结构,导致了升力和阻力系数随不同θ角而发生变化;小间隙比下由于两圆柱间的相互干扰影响,均使中心圆柱的轨迹在不同θ角下发生了较大的变化,顺流向的振动频率与单圆柱振动时相比出现了多倍频,导致其运动轨迹发生了变化。     

Spatial patch structure and adaptive strategy for desert shrub of Reaumuria soongorica in arid ecosystem of the Heihe River Basin

In many arid ecosystems, vegetation frequently occurs in high-cover patches interspersed in a matrix of low plant cover. However, theoretical explanations for shrub patch pattern dynamics along climate gradients remain unclear on a large scale. This context aimed to assess the variance of the Reaumuria soongorica patch structure along the precipitation gradient and the factors that affect patch structure formation in the middle and lower Heihe River Basin (HRB). Field investigations on vegetation patterns and heterogeneity in soil properties were conducted during 2014 and 2015. The results showed that patch height, size and plant-to-patch distance were smaller in high precipitation habitats than in low precipitation sites. Climate, soil and vegetation explained 82.5% of the variance in patch structure. Spatially, R. soongorica shifted from a clumped to a random pattern on the landscape towards the MAP gradient, and heterogeneity in the surface soil properties (the ratio of biological soil crust (BSC) to bare gravels (BG)) determined the R. soongorica population distribution pattern in the middle and lower HRB. A conceptual model, which integrated water availability and plant facilitation and competition effects, was revealed that R. soongorica changed from a flexible water use strategy in high precipitation regions to a consistent water use strategy in low precipitation areas. Our study provides a comprehensive quantification of the variance in shrub patch structure along a precipitation gradient and may improve our understanding of vegetation pattern dynamics in the Gobi Desert under future climate change.

     

南极中山站全天信息采集系统

南极高原拥有独特的天文观测优势,为了对南极中山站夜天文观测条件进行实测研究,中国科学院云南天文台专门研制了一套具有耐低温、自动除雪除霜等适应南极气候特征的全自动全天信息采集系统,该系统可以提供实时的全天云量、天光背景和全天图像,并将信息推送到网页实时显示。介绍了系统的研制及为适应南极气候进行的耐低温实验,统计分析了中山站2016~2017年的全天信息数据,结果显示,中山站2016和2017年的可观测时间为772.21 h和437.38 h,可观测夜数为93 d和51 d,天光背景最大真实值为22.05 Mag/arcsec 2,年平均气温为-10.6℃,最高气温19.1℃,最低气温为-44℃,2016年平均相对湿度为55.2%。     

铜藻(Sargassum horneri)在营养限制胁迫后对NH4-N的超补偿吸收研究

以经济马尾藻铜藻(Sargassum horneri)为研究材料,研究了其在营养限制胁迫后对NH_4-N的超补偿吸收情况。实验分营养限制和恢复营养两个阶段进行,每个阶段均设置饥饿处理组、饱和处理组和正常对照组。铜藻在低营养限制胁迫(饥饿)下培养10天后,恢复营养盐培养3天,分别采用次溴酸盐氧化法和锌镉还原法测定培养液中的NH_4-N和NO_3-N的浓度。本文研究发现,饥饿处理组中铜藻吸收氨氮的速率远高于正常对照组和饱和处理组,在恢复培养第一天时,饥饿处理组对NH_4-N的吸收速率最高为14.94μmol/(g·h),与正常对照组及饱和处理组间差异显著。在恢复培养的后两天,三个处理组中铜藻对NH_4-N的吸收速率差异慢慢变小,直至最后几乎相同。三组对NO_3-N没有表现出较高的吸收,最高仅为6.15μmol/(g·h),结果表明:氮源包括NH_4-N和NO_3-N时,铜藻优先选择吸收NH_4-N。实验后称重测定生长速率:对照组、饥饿处理组和饱和组生长率(SGR)分别为8.48%、8.86%、8.01%,ANOVA方差分析表明,三者存在显著差异(P=0.0320.05),从而证实了铜藻也存在超补偿生长的现象。     

海水中铯-137的γ能谱测量不确定度评估

为科学评价测量结果的可靠性，对海水中137Cs γ能谱分析方法的不确定度进行了评估。根据《化学分析中不确定度的评估指南》，分析不确定度的来源并逐一对各不确定度分量进行了量化，最终计算了合成相对标准不确定度。结果表明，影响海水中137Cs γ能谱测量不确定度的因素分别为样品源137Cs峰区计数、标准源活度、取样体积、化学回收率、本底137Cs峰区计数及标准源137Cs峰区计数，其中样品源137Cs峰区计数的不确定度贡献最为突出。对于137Cs活度浓度为1.28 mBq/L的海水样品，其合成相对标准不确定度为9.78%。     

自然资源一体化政务服务系统及数据融合建设——以南京为例

自然资源部制定的信息化建设总体方案中，要求构建“互联网+自然资源政务服务”应用体系，实现“服务事项标准统一、整体联动、业务协同，自然资源政务服务和共享开放能力全面提高”。一体化政务服务系统作为政务服务应用体系的重点建设内容，也是落实自然资源管理“两统一”职责的重要支撑，如何整合各类数据资源、发挥系统作用，成为亟待研究的问题。本文在分析自然资源业务管理需求后，提出了一体化政务服务系统及数据融合的建设思路。     

珠江口淇澳岛滨海湿地沉积环境演化及其对人类活动的响应

滨海湿地作为人类活动和全球变化反应最为敏感的区域，其沉积记录可以反映出周边地区环境变化及人类活动信息。珠江口淇澳岛滨海湿地钻孔分析结果表明，在中全新世期间淇澳岛附近海域为河口湾环境，在风化层以上开始出现淤积，但在4 200 a BP前后受极冷气候的影响，沉积物粗化；自2 500 a BP以来，沉积环境相对稳定，在小冰期期间略有变化。沉积速率计算结果显示:淇澳岛附近海域自中全新世高海面以来的平均沉积速率为0.29 cm/a，4 160~2 500 a BP、2 500 a BP-1488年、1488-1893年、1893-1986年、1990-2007年期间的平均沉积速率分别为:0.17 cm/a、0.23 cm/a、0.35 cm/a、1.37 cm/a和5.94 cm/a，沉积速率逐渐增大，反映了珠江三角洲演化过程中沉积相与沉积环境的变化；1986-1990年期间的海堤建造极大地扰动了该钻孔上部的沉积过程，在工程施工期间共沉积了厚度约112 cm的沉积层，而在海堤建成后，沉积速率也显著增大。沉积物总有机碳、总氮和C/N值的垂向分布表明，在4 160~2 500 a BP期间受海洋环境影响较大，沉积物中有机碳以海源为主，2 500 a BP以来沉积物中碳、氮含量明显增大，C/N也相应变大，有机碳主要来源于陆源输入，但在小冰期期间海源有机碳贡献略有所增大；近百年来由于受人类活动影响显著，陆源有机碳的贡献快速增加。     

岛屿海岸线自动化提取及其时空变迁研究——以大连市獐子岛为例

海岸带是受人类活动和全球海平面上升影响的敏感地带,海岸线的提取和监测是海岸带生态系统研究和社会管理的重要内容。本文在遥感和地理信息系统的支持下,以修正的归一化水体指数(Modified Normalized Difference Water Index,MNDWI)为基础,结合遥感影像处理和直方图均衡化等技术,实现了大连市獐子岛1985—2016年海岸线的自动化提取。结果表明:(1)通过与三位专家目视解译的成果比对,本文提取海岸线的精度能满足后续研究的要求(相对误差分别为0.045%,0.032%和0.023%);(2)近30年来,獐子岛海岸线总体呈现蚀退趋势,岸线长度与岛屿面积分别呈现变短和变小的趋势,獐子岛(主岛)和大耗岛的岸线蚀退速率最大,褡裢岛次之,小耗岛最小;在人类活动较为密集的区域,海岸线呈现出较为强烈的增长趋势,海水养殖和圈海建坝是岸线增长的主要驱动力;(3)獐子岛海岸线具有显著的分形性质,分形维数随时间呈现增大的趋势,獐子岛(主岛)的分形维数最大,褡裢岛的分形维数最小。     

Bearing capacity of offshore umbrella suction anchor foundation in silty soil under varying loading modes

Considering the current disadvantages of present offshore wind turbine foundations, a novel anchor foundation with skirt and branches is proposed, called offshore umbrella suction anchor foundation (USAF). A series of experiments and numerical simulations were performed to explore the bearing capacity of the USAF under various kinds of loading modes. The bearing characteristics and the anchor–soil interactions are described in detail for horizontal static loading, horizontal cyclic loading, and an antidrawing (pullout) test in silty soil. In the static loading test, the load–deflection of the anchor under step loading was analyzed and the normalized curve of the load–deflection was obtained to determine the ultimate horizontal bearing capacity of the anchor under normal working conditions. Under horizontal cyclic loading, the relationship between the plastic cumulative deformation and cyclic number was determined. In addition, the responses of USAF were investigated for a low wave frequency and storm surges. In the drawing test, it was found that a “segmentation phenomenon” occurred during the test. Moreover, a method to identify the maximum antidrawing load of USAF was provided based on dynamic mechanics. The numerical results show that the use of anchor branches and skirt can enhance the bearing performance of USAF to a certain degree. However, the anchor branch has a slight positive influence on the bearing performance improvement. The USAF is not only similar to a stiff short pile, but a rotation occurs. The failure envelope under composite loading (V-M) was obtained and the changes associated with changes in the aspect ratio of the internal compartment were clarified.