Mussels document loss of bioavailable polycyclic aromatic hydrocarbons and the return to baseline conditions for oiled shorelines in Prince William Sound, Alaska

Polycyclic aromatic hydrocarbons (PAH) were measured in mussels (Mytilus trossulus) collected between 1990 and 2002 from 11 sites on the shores of Prince William Sound (PWS), Alaska, that were heavily oiled by the 1989 Exxon Valdez oil spill (EVOS). This study, utilizing the methods of the NOAA Status and Trends Mussel Watch Program, found that concentrations of PAH released from spill remnants have decreased dramatically with time and by 2002 were at or near the range of total PAH (TPAH) of 3-355 ng/g dry weight obtained for mussels from unoiled reference sites in PWS. Time-series TPAH data indicate a mean TPAH half-life in mussel tissues of 2.4 years with a range from 1.4 to 5.3, yielding an annual mean loss of bioaccumulated TPAH of 25%. The petroleum-derived TPAH fraction in mussel tissues has decreased with time, reflecting the decreasing release of EVOS residues in shoreline sediments. These results show that PAH from EVOS residues that remain buried in shoreline sediments after the early 1990s are in a form and at locations that have a low accessibility to mussels living in the intertidal zone.     

A permanent seismic station beneath the Ocean Bottom

The Hawaii Institute of Geophysics began development of the Ocean Subbottom Seisometer (OSS) system in 1978, and OSS systems were installed in four locations between 1979 and 1982. The OSS system is a permanent, deep ocean borehole seismic recording system composed of a borehole sensor package (tool), an electromechanical cable, recorder package, and recovery system. Installed near the bottom of a borehole (drilled by the D/V Glomar Challenger), the tool contains three orthogonal, 4.5-Hz geophones, two orthogonal tilt meters; and a temperature sensor. Signals from these sensors are multiplexed, digitized (with a floating point technique), and telemetered through approximately 10 km of electromechanical cable to a recorder package located near the ocean bottom. Electrical power for the tool is supplied from the recorder package. The digital seismic signals are demultiplexed, converted back to analog form, processed through an automatic gain control (AGC) circuit, and recorded along with a time code on magnetic tape cassettes in the recorder package. Data may be recorded continuously for up to two months in the self-contained recorder package. Data may also be recorded in real time (digital formal) during the installation and subsequent recorder package servicing. The recorder package is connected to a submerged recovery buoy by a length of bouyant polypropylene rope. The anchor on the recovery buoy is released by activating either of the acoustical command releases. The polypropylene rope may also be seized with a grappling hook to effect recovery. The recorder package may be repeatedly serviced as long as the tool remains functionalA wide range of data has been recovered from the OSS system. Recovered analog records include signals from natural seismic sources such as earthquakes (teleseismic and local), man-made seismic sources such as refraction seismic shooting (explosives and air cannons), and nuclear tests. Lengthy continuous recording has permitted analysis of wideband noise levels, and the slowly varying parameters, temperature and tilt.Hawaii Institute of Geophysics Contribution 1909.     

Remote Sensing Analysis of the Suspended Sediment Transport in Lingdingyang

- The data of landsat TM of multi-temporal for Lingdingyang Estuary, Pearl River in China is firstly used with suspended sediment concentration of field measurement to establish a correlative model equation. After the ratio processing of TM data and atmospheric correction, the images of suspended sediment concentration of different temporals are exported from the image processing systems AREIS II and III. These images express the characteristics of suspended sediment distribution, the mode of sediment transport and the extent of dispersion under the actions of tidal current and wind condition of different seasons.     

A summary of the geology and oil habitat of the Eastern Flank Hydrocarbon Province of South Oman

The Eastern Flank Hydrocarbon Province borders the southeastern edge of the South Oman Salt Basin in the southern part of Oman. An intensive exploration programme by PDO over the past seven years has led to the discovery of almost 2 × 10⁹ m³ of oil with current production of some 15000 m³/d from six fields.In stark contrast to other oil habitats of the Arabian Peninsula, the main play involves rock units and geological events ranging in age from Late Precambrian to Quaternary Times, while trap development and charging are closely related to syn-tectonic salt dissolution.The principal reservoirs and seals are poorly consolidated, Palaeozoic clastics which drape, due to salt dissolution, over residual ‘cores’ principally composed of either Lower Palaeozoic sandstones (Haima Group), or Late Proterozoic carbonates (Huqf Group), or some combination of these. Oils have been geochemically correlated with algal source rocks of the Huqf Eastern Flank. Structures are considered to have been ‘charged’ from Late Mesozoic times onwards in conjunction with progressive subsurface salt removal and the onset of maturation of local source rocks. The effectiveness of ‘charging’ along the retreating salt edge is indicated by the small percentage of dry wells.Major oil zones are found in both anticlinal and truncation traps which are commonly developed around sandstone (Haima Group) cores. Oils show a wide range of characteristics but are typically heavy, early expulsion crudes, high sulphur with little associated gas. Bacterial transformation is not uncommon.Producing reservoirs mainly occur at relatively shallow depths (600–1200 m). Primary recovery factors of around 7% reflect the high density and viscosity of the Eastern Flank crudes and have initiated interest in Enhanced Oil Recovery (EOR) techniques. Two such pilot projects, involving steam and polymer flooding, are due to commence in 1984 and, if successful, will substantially increase the reserve base of these fields.     

Test Study on Current Force on Mooring Ships

In respect of an offshore berthing pillar, the test study result of current force acting on mooring ships is described in this paper. Empirical and semi-empirical relationships of current force coefficient are given according to the angle between the flow direction and the ship's longitudinal axis, which are coincident with the result of theoretical analysis.     

A Computational Model for Velocity Separation in Shallow Sea

Based on the hydrodynamical feature and the theoretical velocity profiles of tidal flow and vvind-induced flow in shal-low sea, a computational model is established for the first time, which can separate observed velocity into tidal velocity and wind-induced velocity by use of the least square method. With the model, not only the surface velocities of tidal flow and vvind-induced flow are obtained, but also the bed roughness height is determined and the wind velocity above the wa-ter surface is estimated. For verification of the model, the observed velocity in the Yellow River Estuary and the laborato-ry test is separated, then it is applied to the Yangtze River Estuary. All the results are satisfactory. The research results show that the model is simple in method, feasible in process and reasonable in result. The model is a valid approach to analysis and computation of field dala, and can be applied to separate the observed velocity in shallow sea; at the same time, reasonable boundary conditions of th     

Effect of Berm Width and Elevation on Irregular Wave Run-Up

This paper discusses the effect of berm width and elevation of composite slope on irregular wave run-up. Based on the data obtained from model tests, the formula and distribution of irregular wave run-up on composite slope are derived. The changing of wind speed, width and elevation of the berm are considered comprehensively. The wave run-up with various exceedance probability can be es-timated utilizing the distribution curves of irregular wave run-up.     

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

On the sulphur chemistry of a super-anoxic fjord, Framvaren, South Norway

The concentrations of total carbonate (C_t), sulphate, sulphide, thiols and oxygen, the ratio between the stable sulphur isotopes ³⁴S and ³²S in sulphate and sulphide, and the density (used to calculate salinity) were determined on samples from the water column of Framvaren, a superanoxic fjord in southern Norway. From a depth of 18m (the oxic-anoxic boundary) the initial sulphate concentration, ([SO₄]_init), as calculated from salinity, is significantly higher than the sum of the measured sulphur species. This is attributed to a loss of sulphur from the water column. The amount of total carbonate produced, corrected for the initial concentration (C_t - 2.4 Sal/35) is found to be proportional to the amount of sulphate consumed, ([SO₄]_init - [SO₄]), according to the following relation C_t- 2.4 Sal/35 = 1.84 ([SO₄]_init - [SO₄]). Isotopic fractionation caused by bacterial sulphate reduction in the anoxic part of the water column produces sulphide with a δ³⁴S 40‰ lower than the δ³⁴S for sulphate at corresponding depths. The isotopic fractionation also results in δ³⁴S value for the remaining sulphate at depths below 80 m being considerably higher than the mean value for ocean water, which is close to + 20‰. The δ³⁴S values for sulphate at depths between 10 and 50 m were lower than + 20‰ which indicates oxidation of sulphide, which follows upon diffusion of sulphide from deeper parts of the water column and inflow of oxygenated seawater over the sill into the anoxic water of the fjord. A conclusive scenario of the Framvaren sulphur chemistry is presented.