Sedimentology,stratigraphy and architecture of the Nicobar Fan (Bengal–Nicobar Fan System), Indian Ocean: Results from International Ocean Discovery Program Expedition 362

Drill sites in the southern Bay of Bengal at 3°N 91°E (International Ocean Discovery Program Expedition 362) have sampled for the first time a complete section of the Nicobar Fan and below to the oceanic crust. This generally overlooked part of the Bengal–Nicobar Fan System may provide new insights into uplift and denudation rates of the Himalayas and Tibetan Plateau. The Nicobar Fan comprises sediment gravity-flow deposits, mostly turbidites, that alternate with hemipelagite drapes and pelagite intervals of varying thicknesses. The decimetre-thick to metre-thick oldest pre-fan sediments (limestones/chalks) dated at 69 Ma are overlain by volcanic material and slowly accumulated pelagites (0.5 g cm⁻² kyr⁻¹). At Expedition 362 Site U1480, terrigenous input began in the early Miocene at ca 22.5 Ma as muds, overlain by very thin-bedded and thin-bedded muddy turbidites at ca 19.5 Ma. From 9.5 Ma, sand content and sediment supply sharply increase (from 1–5 to 10–50 g cm⁻² kyr⁻¹). Despite the abundant normal faulting in the Nicobar Fan compared with the Bengal Fan, it offers a better-preserved and more homogeneous sedimentary record with fewer unconformities. The persistent connection between the two fans ceased at 0.28 Ma when the Nicobar Fan became inactive. The Nicobar Fan is a major sink for Himalaya-derived material. This study presents integrated results of International Ocean Discovery Program Expedition 362 with older Deep Sea Drilling Project/Ocean Drilling Program/International Ocean Discovery Program sites that show that the Bengal–Nicobar Fan System experienced successive large-scale avulsion processes that switched sediment supply between the Bengal Fan (middle Miocene and late Pleistocene) and the Nicobar Fan (late Miocene to early Pleistocene). A quantitative analysis of the submarine channels of the Nicobar Fan is also presented, including their stratigraphic frequency, showing that channel size/area and abundance peaked at ca 2 to 3 Ma, but with a distinct low at 3 to 7 Ma: the intervening stratigraphic [sub]unit was a time of reduced sediment accumulation rates.     

Geomorphic response to gravel augmentation and high‐flow dam release in the Trinity River,California

The geomorphic effect of introducing a gravel augmentation totaling 520 m³ into a gravel‐bed stream during a dam‐controlled flood in May of 2015 was monitored with bedload transport measurements, an array of seismometers, and repeated topographic surveys. Half of the augmented gravel was injected into the flow with front‐end loaders on the rising limb of the flood and the other half was injected on the first day of the peak. Virtually all of the gravel transported past the injection point was deposited within about 7 to 10 channel widths of the injection point. Most of the injected gravel deposited along the left bank of the river whereas the right half of the channel bed was dominated by scour. The downstream third of the depositional area consisted of a small dune field that developed prior to the second gravel injection and subsequently migrated about one channel width downstream. A second depositional front was observed upstream from the gravel injection point, where a delta‐like wedge of bed material developed in the first hours of the flow release and changed little over the remainder of the release. These two depositional areas represent small‐scale bed‐material storage reservoirs with the potential to accumulate and periodically release packets of bed material. Interactions with such storage reservoirs are hypothesized to cause large bed‐material pulses to disperse by fragmenting into multiple smaller pulses. As a refinement to the conceptual model that views sediment pulse evolution in terms of dispersion and translation, the concept of pulse fragmentation has practical implications for gravel management. It implies that gravel augmentations can produce morphologic changes at locations that are separated from the augmentation point by arbitrarily long reaches, and it highlights the dependence of pulse propagation rates on the nature and distribution of the bed‐material storage reservoirs in the channel system. Copyright © 2017 John Wiley & Sons, Ltd.     

Effects of lateral confinement in natural and leveed reaches of a gravel‐bed river: Snake River,Wyoming, USA

This study examined the effects of natural and anthropogenic changes in confining margin width by applying remote sensing techniques – fusing LiDAR topography with image‐derived bathymetry – over a large spatial extent: 58 km of the Snake River, Wyoming, USA. Fused digital elevation models from 2007 and 2012 were differenced to quantify changes in the volume of stored sediment, develop morphological sediment budgets, and infer spatial gradients in bed material transport. Our study spanned two similar reaches that were subject to different controls on confining margin width: natural terraces versus artificial levees. Channel planform in reaches with similar slope and confining margin width differed depending on whether the margins were natural or anthropogenic. The effects of tributaries also differed between the two reaches. Generally, the natural reach featured greater confining margin widths and was depositional, whereas artificial lateral constriction in the leveed reach produced a sediment budget that was closer to balanced. Although our remote sensing methods provided topographic data over a large area, net volumetric changes were not statistically significant due to the uncertainty associated with bed elevation estimates. We therefore focused on along‐channel spatial differences in bed material transport rather than absolute volumes of sediment. To complement indirect estimates of sediment transport derived by morphological sediment budgeting, we collected field data on bed mobility through a tracer study. Surface and subsurface grain size measurements were combined with bed mobility observations to calculate armoring and dimensionless sediment transport ratios, which indicated that sediment supply exceeded transport capacity in the natural reach and vice versa in the leveed reach. We hypothesize that constriction by levees induced an initial phase of incision and bed armoring. Because levees prevented bank erosion, the channel excavated sediment by migrating rapidly across the restricted braidplain and eroding bars and islands. Copyright © 2017 John Wiley & Sons, Ltd.     

Radiogenic helium in xenoliths from Simcoe, Washington, USA: implications for metasomatic processes in the mantle wedge above subduction zones

We report ³He/⁴He ratios from 10 peridotite xenoliths considered to represent samples of the uppermost mantle wedge above the downgoing Juan de Fuca Plate. Helium isotopic ratios in all but two of the xenoliths are similar to many arc magmas, roughly 7 Ra (1 Ra=atmospheric value). Based on decoupling of He from Sr, Nd and Os in these samples, similar He ratios in olivines from rims of larger xenoliths, and modeling of helium exchange between xenoliths and magmas, we interpret this ratio as that of helium in the host basalt. ³He/⁴He ratios as low as 4.2 Ra are found in olivines from the cores of the two largest xenoliths. These results cannot be reasonably explained by interaction with crustal material or post-eruptive ingrowth of ⁴He, but have been produced by interaction between mantle peridotite and a ⁴He-rich melt or fluid. Either ⁴He already present in the subducting oceanic crust has been retained to significant depths below Simcoe and then directly released behind the arc to interact with the mantle wedge, or, more likely, ⁴He has been produced by decay of U and Th in metasomatized mantle directly above the slab; a He-rich fluid or melt from this source has then ascended and modified the region of mantle represented by the xenoliths. This latter model is supported by estimates of residence time for the Simcoe metasomatic agent from U–Th–Pb isotopic systematics of pyroxenes from the Simcoe peridotites, estimated U and Th concentrations in the source of the fluid or melt, and commonly assumed patterns of helium behavior. This model is also consistent with higher ³He/⁴He ratios typically measured in arc samples; the portion of sub-arc mantle with such low He isotope ratios may be quite small, but the Simcoe xenoliths record a much larger volumetric contribution of the He-rich metasomatic agent than do arc lavas.     

Seasonal ground ice impacts on spring ecohydrological conditions in a western boreal plains peatland

Peatlands in the Western Boreal Plains act as important water sources in the landscape. Their persistence, despite potential evapotranspiration (PET) often exceeding annual precipitation, is attributed to various water storage mechanisms. One storage element that has been understudied is seasonal ground ice (SGI). This study characterized spring SGI conditions and explored its impacts on available energy, actual evapotranspiration, water table, and near surface soil moisture in a western boreal plains peatland. The majority of SGI melt took place over May 2017. Microtopography had limited impact on melt rates due to wet conditions. SGI melt released 139mm in ice water equivalent (IWE) within the top 30cm of the peat, and weak significant relationships with water table and surface moisture suggest that SGI could be important for maintaining vegetation transpiration during dry springs. Melting SGI decreased available energy causing small reductions in PET (<10mm over the melt period) and appeared to reduce actual evapotranspiration variability but not mean rates, likely due to slow melt rates. This suggests that melting SGI supplies water, allowing evapotranspiration to occur at near potential rates, but reduces the overall rate at which evapotranspiration could occur (PET). The role of SGI may help peatlands in headwater catchments act as a conveyor of water to downstream landscapes during the spring while acting as a supply of water for the peatland. Future work should investigate SGI influences on evapotranspiration under differing peatland types, wet and dry spring conditions, and if the spatial variability of SGI melt leads to spatial variability in evapotranspiration.     

Primitive off-rift basalts from Iceland and Jan Mayen: Os-isotopic evidence for a mantle source containing enriched subcontinental lithosphere

New measurements of Os, He, Sr and Nd isotopes, along with major and trace elements, are presented for basalts from the three volcanic flank zones in Iceland and from Jan Mayen Island. The ¹⁸⁷Os/¹⁸⁸Os ratios in lavas with <30 ppt Os (n = 4) are elevated compared to ratios in coexisting olivine and appear to be contaminated at a shallow level. The ¹⁸⁷Os/¹⁸⁸Os ratios in the remaining lavas with >30 ppt Os (n = 17) range between 0.12117 and 0.13324. These values are surprisingly low for oceanic island basalts and include some samples that are less than putative present-day primitive upper mantle (PUM with ¹⁸⁷Os/¹⁸⁸Os of 0.1296). These low ¹⁸⁷Os/¹⁸⁸Os preclude significant shallow-level contamination from oceanic crust. The ¹⁸⁷Os/¹⁸⁸Os ratios for Jan Mayen lavas are less than PUM, severely limiting the presence of any continental crust in their mantle source. A positive correlation between ¹⁴³Nd/¹⁴⁴Nd and ¹⁸⁷Os/¹⁸⁸Os ratios in Iceland and Jan Mayen lavas likely reflects the presence in their source of ancient subcontinental lithosphere that has undergone incompatible trace element enrichment that did not affect the Re-Os system. In addition, the Jan Mayen lava isotopic signature cannot be explained solely by the presence of subcontinental lithospheric mantle, and the influence of another geochemical component, such as a mantle plume appears required. Combined ⁸⁷Sr/⁸⁶Sr, ¹⁴³Nd/¹⁴⁴Nd, ³He/⁴He and ¹⁸⁷Os/¹⁸⁸Os data indicate a genetic relationship between Jan Mayen Island and the Iceland mantle plume. Material from the Iceland mantle plume likely migrates at depth until it reaches the tensional setting of the Jan Mayen Fracture Zone, where it undergoes low-degree partial melting. At a first-order, isotopic co-variations can be interpreted as broadly binary mixing curves between two primary end-members. One end-member, characterized in particular by its unradiogenic ¹⁸⁷Os/¹⁸⁸Os and ¹⁴³Nd/¹⁴⁴Nd, low ³He/⁴He and high ⁸⁷Sr/⁸⁶Sr, is represented by subcontinental lithospheric mantle stranded and disseminated in the upper mantle during the opening of the Atlantic Ocean. The second end-member corresponds to a hybrid mixture between the depleted-MORB mantle and the enriched Iceland mantle plume, itself resulting from mixing between recycled oceanic crust and depleted lower mantle. This hybrid accounts for the high ³He/⁴He (∼28 Ra), high ¹⁴³Nd/¹⁴⁴Nd (∼0.5132), high ¹⁸⁷Os/¹⁸⁸Os (∼0.14) and low ⁸⁷Sr/⁸⁶Sr (∼0.7026) composition observed in Iceland. Two different models may account for these observed mixing relationships between the end-members. In this first model, the Iceland mantle entrains pristine depleted material when rising in the upper mantle and allows refractory sub-lithospheric fragments to melt because of excess heat derived from the deep plume material. A second model that may better account for the Pb isotopic variations observed, uses the same components but where the depleted-MORB mantle is already polluted by subcontinental lithospheric mantle material before mixing with the Iceland mantle plume. Both cases likely occur. Though only three principal components are required to explain the isotopic variations of the Iceland-Jan Mayen system, the different possible mixing relationships may be accounted for by potentially a greater number of end-members.     

Investigation of a hybrid polygonal finite element formulation for confined and unconfined seepage

This study presents a formulation for field problems using hybrid polygonal finite elements, taking steady state seepage through a porous material as the focus. We make comparisons with a conventional finite element formulation based on a single primary variable, focussing on the advantages of the hybrid formulation in terms of flux field accuracy and extension to convex polygonal shaped elements. For the unconfined case, we adopt a head dependent hydraulic conductivity that does not require remeshing. The performance of the hybrid polygonal element formulation is demonstrated through a series of numerical examples. The results show a sensitivity of the location of the free surface in unconfined seepage to mesh configuration for hybrid quadrilateral meshes with various aspect ratios, but not for hybrid polygonal meshes with various orientations and irregularity. Examination of the free surface location results for several conforming shape function options shows an insensitivity to choice of interpolation function, provided that it conforms with the assumptions in the formulation. Copyright © 2016 John Wiley & Sons, Ltd.     

Assessing subcontinental lithospheric mantle sources for basalts: Neogene volcanism in the Pacific Northwest,USA as a test case

Many objections have been raised as to the ability of subcontinental lithospheric mantle to produce voluminous amounts of basalt, because this upper part of the mantle is thought to be refractory, and the geotherm is rarely above the peridotite solidus at these depths under continents. However, in the Pacific Northwest of the USA during the Neogene, the subcontinental lithospehric mantle has been proposed as a key source for basalts erupted within the northern Basin and Range, and for the Columbia River flood basalts erupted on the Columbia Plateau. An alternative explanation to melting in the subcontinental lithospheric mantle, which equally well explains the chemical compositions thought to originate there, is that these magmas were contaminated by crust of varying ages. Calc-alkaline lavas, which occupy the Blue Mountains in the center of this region, hold clues to the latter process. Their elevated trace element ratios (e.g., Ba/Zr, K₂O/P₂O₅), coupled with differentiation indicators such as Mg? [molar Mg/(Mg?+?Fe)], and Sr, Nd, and Pb isotopic compositions, can most reasonably be explained by crustal contamination. Appraisal of continental peridotite xenolith data indicates that high trace element ratios such as Ba/Zr in continental basalts cannot result from melting in the subcontinental lithospheric mantle. Instead, as with the calc-alkaline lavas, these high ratios in the tholeiites most likely indicate crustal contamination. Furthermore, the peridotite xenoliths do not have a relative depletion in Nb and Ta that is observed in most of the lavas within the region. Relatively minor volumes of tholeiites erupted in late Neogene times in the northern Basin and Range (Hi-Mg olivine tholeiites) and Columbia Plateau (Saddle Mountains basalts), are the only lavas which have trace element and isotopic compositions consistent with being derived from, or largely interacting with a subcontinental lithospheric mantle in the Pacific Northwest. In contrast to the prior studies, we suggest that the mantle sources for most of the basalts in this region were ultimately beneath the lithospheric mantle.