Location Performance and Detection Magnitude Threshold of the Romanian National Seismic Network

Romania is an earthquake prone area with a few destructive earthquakes per century. The National Institute for Earth Physics carries out the seismic survey of Romania through the Romanian National Seismic Network (RNSN) consisting of 65 real-time seismic stations. Daily reports and monthly bulletins are delivered after routinely analyzing and processing the recorded data. In the present paper we applied the Seismic Network Evaluation through Simulation method for the RNSN configuration as it was in August 2011 to estimate the background noise level, assess the appropriateness of the velocity model adopted in routine location procedure, evaluate the hypocenter location uncertainty and determine the detection magnitude threshold. Areas of greater (southern Romania) and lower (Carpathians and Apuseni Mountains) background noise within the RNSN are identified by mapping the average power of noise in 1–12?Hz frequency range. The statistical study of the P and S phases residual times allow us to assess the appropriateness of the velocity model used in routine location. Both P- and S-wave velocity models can be optimized to improve the quality of the hypocenter location. As shown by our analysis, the RNSN is able to detect and locate earthquakes with M _L magnitude above 2.5 anywhere on the Romanian territory, except the border areas, such as the Crisana–Maramures seismic source zone. Merging data from both sides of the border significantly improves the quality of hypocenter location in these areas.     

Biosorption of cadmium(II), lead(II) and cobalt(II) from aqueous solution by biochar from cones of larch (<Emphasis Type="Italic">Larix decidua</Emphasis> Mill. <Emphasis Type="Italic">subsp. decidua</Emphasis>) and spruce (<Emphasis Type="Italic">Picea abies</Emphasis> L. H. Karst)

Because of their physicochemical properties, biochars can be used as sorption materials for removal of toxic substances. The purpose of the present study was to determine whether biochar obtained from cones of larch (Larix decidua Mill. subsp. decidua) and spruce (Picea abies L. H. Karst) could be used as a sorbent for Cd²⁺, Pb²⁺ and Co²⁺ in aqueous solutions. So far, this feedstock had not been tested in this respect. The material was subjected to pyrolysis at 500 and 600 °C for the duration of 5, 10 and 15 min. The obtained pyrolysates were found to differ in terms of pH and the contents of the essential macroelements. The different values of these parameters were determined for varying temperature, duration of the pyrolysis process and type of feedstock. Sorption capacities of the biochars for removal of Cd²⁺, Pb²⁺ and Co²⁺ were examined using simulated contamination of aqueous solutions with salts of these metals. The findings showed the highest, nearly complete, removal for Pb²⁺ were maximum 99.7%, and almost three times lower value for Cd²⁺ and Co²⁺ (respectively, 35.7 and 24.8%). It was demonstrated that pyrolysis of conifer cones produced optimum sorption capacities when the process was conducted at a temperature of 500 °C for the duration of 5 min. It was shown that products of spruce cone pyrolysis were characterized by better sorption capacity in comparison with products of larch cone pyrolysis. The properties of conifer cone biochar create the possibility of using it as an adsorbent in water and wastewater treatment as well as in production of filters and activated carbon.     

Ground-motion prediction equations for the intermediate depth Vrancea (Romania) earthquakes

We present the regional ground-motion prediction equations for peak ground acceleration (PGA), peak ground velocity (PGV), pseudo-spectral acceleration (PSA), and seismic intensity (MSK scale) for the Vrancea intermediate depth earthquakes (SE-Carpathians) and territory of Romania. The prediction equations were constructed using the stochastic technique on the basis of the regional Fourier amplitude spectrum (FAS) source scaling and attenuation models and the generalised site amplification functions. Values of considered ground motion parameters are given as the functions of earthquake magnitude, depth and epicentral distance. The developed ground-motion models were tested and calibrated using the available data from the large Vrancea earthquakes. We suggest to use the presented equations for the rapid estimation of seismic effect after strong earthquakes (Shakemap generation) and seismic hazard assessment, both deterministic and probabilistic approaches.     

The nature of a dusty ring in Virgo

We detected a ring-like distribution of far-infrared (FIR) emission in the direction of the centre of the Virgo cluster (VC). We studied this feature in the FIR, radio and optical domains, and deduced that the dust within the feature reddens the galaxies in the direction of the VC but does not affect stars within the Milky Way. This is likely to be a dusty feature in the foreground of the VC, presumably in the Galactic halo. The H  i distribution follows the morphology of the FIR emission and shows peculiar kinematic behaviour. We propose that a highly supersonic past collision between an H  i cloud and the Galactic H  i formed a shock that heated the interface gas to soft X-ray temperatures. H  i remnants from the projectile and from the shocked Galactic H  i rain down on to the disc as intermediate-velocity gas.
Our finding emphasizes that extragalactic astronomy must consider the possibility of extinction by dust at high galactic latitude and far from the Galactic plane, which may show structure on 1° and smaller scales. This is particularly important for studies of the VC, e.g. in the determination of the Hubble constant from Cepheids in cluster galaxies.     

Isotopic climate record in a Holocene stalagmite from Ursilor Cave (Romania)

The PU‐2 stalagmite from Ursilor Cave provides the first dated Romanian isotope record for the Holocene. The overall growth rate of the speleothem was 3.5 cm kyr^?1, corresponding to a temporal resolution of 142 y between each isotope analysis. The ‘Hendy’ tests indicate that isotopic equilibrium conditions occurred during the formation of PU‐2, and hence that it is suitable for palaeoclimatic studies. The relationship between δ¹⁸O and temperature was found to be positive. This can be interpreted either as rain‐out with distance from the west‐northwest ocean source of evaporation or shifts in air mass source with changing North Atlantic Oscillation indices. Applying five U–Th thermal ionisation mass spectrometric (TIMS) dates to a 17.5 cm isotope profile (δ¹⁸O and δ¹³C) along the stalagmite growth axis enabled a tentative interpretation of the palaeoclimate signal over the past 7.1 kyr. Spikes of depleted isotopic δ¹⁸O values are centred near ca. 7, ca. 5.2 and ca. 4 ka, reflecting cool conditions. The record shows two warm intervals between ca. 3.8 and ca. 3.2 ka (the maximum warmth) and from ca. 2 to ca. 1.4 ka, when the δ¹⁸O values were less negative than present. The ‘Holocene Climate Optimum’ spanning the time interval from ca. 6.8 to ca. 4.4 ka is not well expressed in the PU‐2 stalagmite. Individual spikes of lighter δ¹³C are interpreted as indicative of periods of heavy rainfall, at ca. 7, ca. 5.5, and ca. 3.5 ka. The overall trend to lighter δ¹³C in the PU‐2 stalagmite may reflect a gradual decrease in water–rock interaction. The results demonstrate that the effect of North Atlantic oceanic changes extended to the investigated area. Nevertheless, some differences in temporal correlation and intensity of stable isotopic response to these climatic events have been found, but the exact nature of these differences and the underlying mechanism is yet to be determined. Copyright © 2002 John Wiley & Sons, Ltd.     

Data replenishment of five moderate earthquake sequences in Japan,with semi-automatic cluster selection

Missing early aftershocks following relatively large or moderate earthquakes can cause significant bias in the analysis of seismic catalogs. In this paper, we systematically address the aftershock missing problem for five earthquake sequences associated with moderate-size events that occurred inland Japan, by using a stochastic replenishing method. The method is based on the notion that if a point process (e.g., earthquake sequence) with time-independent marks (e.g., magnitudes) is completely observed, it can be transformed into a homogeneous Poisson process by a bi-scale empirical transformation. We use the Japan Meteorological Agency (JMA) earthquake catalog to select the aftershock data and replenish the missing early events using the later complete part of each aftershock sequence. The time windows for each sequence span from 6 months before the mainshock to three months after. The semi-automatic spatial selection uses a clustering method for the epicentral selection of earthquakes. The results obtained for the original JMA catalog and replenished datasets are compared to get insight into the biases that the missing early aftershocks may cause on the Omori-Utsu law parameters’ estimation, characterizing the aftershock decay with time from the mainshock. We have also compared the Omori-Utsu law parameter estimates for two datasets following the same mainshock; the first dataset is the replenished sequence, while the second dataset has been obtained by waveform-based analysis to detect early aftershocks that are not recorded in the JMA catalog. Our results demonstrate that the Omori-Utsu law parameters estimated for the replenished datasets are robust with respect to the threshold magnitude used for the analyzed datasets. Even when using aftershock time windows as short as three days, the replenished datasets provide stable Omori-Utsu law parameter estimations. The p-values for all the analyzed sequences are about 1.1 and c-values are significantly smaller compared to those of original datasets. Our findings prove that the replenishment method is a fast, reliable approach to address the missing aftershock problem.     

High resolution seismic investigation in salt mining context

The high resolution seismic (HRS) reflection survey was conducted on an experimental site in eastern France. Three profiles were designed in order to check the detectability of salt-mining cavities at depth range of 110–180 m. The detection and location of cavities on the HRS images are based on indirect symptoms corresponding to cavity-induced perturbations of lower markers. In most cases, the cavities were detected and the accuracy of estimation of horizontal extensions of the cavities was surprisingly good (of about 10 m). The accuracy of vertical positioning is difficult to establish when the detection is performed indirectly and the only information that could be derived is that a cavity is beyond the masked geological interface. The detection ability depends on the size of the cavity in regard to wavelength and depth. These factors are included in AN coefficient which was used in order to evaluate the detectability of a given cavity.     

Reconstruction of climatic and environmental changes in NW Romania during the early part of the last deglaciation (15,000–13,600 cal yr BP)

High resolution pollen, plant macrofossil, charcoal, mineral magnetic and sedimentary analyses, combined with AMS ¹⁴C measurements, were performed on multiple sediment sequences along a transect through the former crater lake Preluca iganului in northwestern Romania in order to reconstruct the climatic and environmental changes during the early part of the Last Termination. Lake sediments started to accumulate at 14,700 cal yr BP. Initially the upland vegetation consisted of an open forest with mainly Betula and Salix and few Pinus sp., but from 14,500 cal yr BP onwards, Pinus mugo, P. sylvestris and Populus and later on also Larix became established around the lake. Between 14,150 and 13,950 cal yr BP, Pinus cembra seems to have replaced P. mugo and P. sylvestris. At 13,950 cal yr BP the tree cover increased and Picea appeared for the first time, together with Pinus cembra, P. mugo and Larix. From 13,750 cal yr BP onwards, a Picea forest developed around the site. Based on the combined proxy data the following climatic development may be inferred: 14,700–14,500 cal yr BP, cooler and wet/humid; 14,500–14,400 cal yr BP: gradually warmer temperatures, wet/humid with dry summers; 14,400–14,320 cal yr BP: warm and dry; 14,320–14,150 cal yr BP: cooler and wet/humid; 14,150–14,100 cal yr BP: warm and dry; 14,100–13,850 cal yr BP: warmer and wet/humid; <13,850 cal yr BP: warm and dry. The tentative correlation of this development with the North Atlantic region assumes that the period >14,700 cal yr could correspond to GS-2a, the time span between 14,700 and 14,320 to GI-1e, the phase between 14,320 and 14,150 cal yr BP to GI-1d and the time frame between 14,150 and 13,600 cal yr BP to the lower part of GI-1c.     

The occurrence of some metals in mesozooplankton taken from the southern Baltic

The determination of Fe, Mn, Ni, Pb, Cu, Co, Zn, Cd, K and Na was carried out in the mesozooplankton caught in the southern Baltic in July 1980. The species structure of mesozooplankton was characterized on the basis of mean numbers of particular components and their percentage. The chemical analyses of the samples of mesozooplankton show a wide range of values, although they were within the ranges published for zooplankton from other aquatic regions of the world. Both concentration factors and selectivity factors for Zn, Cd, Pb and Cu in the organisms analysed were calculated. The significant cross-correlation coefficients calculated for all possible pairs of metals showed the following associations: CuPbNiMnFe, MnZn and NaZn.