Phase relations in the partial melting of the Baldissero spinel-lherzolite (Ivrea-Verbano zone,Western Alps,Italy)

The occurrence of various types of mobilizates in the Baldissero spinel lherzolite is due to partial melting of the same body. The study of the relationships between the peridotite and its mobilizates demonstrates that olivine did not take an active part in the fusion. Estimates of the degree of partial melting vary from 10% for the average composition, to 20% for the most depleted samples. These values refer to an initial pyrolitic composition, and thus are relative, as they can vary depending on the actual primary composition.The calculated composition of the liquid generated by partial melting is quite similar to that of a picritic basalt, and is practically the same irrespective of the 10% and 20% fusion. This fact provides strong evidence that melting took place at a unique invariant point of the natural system, producing a liquid with a remarkably constant composition.Projection of the liquid in the fo-an-di-si diagram is fairly well aligned with the modal compositions of the solid residua, but does not coincide with the minimum of the simplified system. The proposed solution is based on the enlargement of the spinel field (at constant pressure), due to the Cr content in this phase. Therefore, the position of the invariant minimum is not fixed, but rather controlled by the Cr content of the spinel. Is is suggested that, by an increase in the Cr content, spinel might at a given moment become refractory. Thus, saturated or over-saturated magmas are produced depending on the phase relations between olivine, orthopyroxene and clinopyroxene. This would happen in the case of very advanced fusions or in the case of fusion of already depleted peridotites.The relationships between mobilizates of different generations suggest a non adiabatic mantle upwelling.     

Solar constant and sunspots

Summary The relationship, already found by the authors, between sunspot numbers and the solar constant, as deduced from the highest global irradiance values at noon, is here reexamined and confirmed. Some attempts at explanation and further inferences are presented.     

Introduction à la climatologie dynamique de l'Amerique du Nord,de l'Atlantique Nord et de l'Europe

Résumé Nous appliquons dans ce mémoire la théorie des perturbations, développée antérieuremet par l'un de nous, à la déduction des principales caractéristiques normales des perturbations compatibles avec un champ moyen donné de pression et de température. Cette deduction comprend la détermination: 1) de la configuration moyenne des perturbations dans les différentes régions étudiées; 2) des zones de creusement et de comblement et en particulier des foyers de formation et de disparition des perturbations; 3) des trajectoires, vitesses, fréquences et amplitudes moyennes des perturbations. C'est à l'ensemble de ces propriétés moyennes que nous donnons le nom de «climatologie dynamique» d'une période donnée.Après une première partie théorique, nous donnons des exemples d'application des résultats généraux à la climatologie dynamique des mois de Janvier et de Juillet pour l'Amérique du Nord, l'Atlantique Nord et l'Europe.

---

Summary In this paper we apply the theory of perturbations, previously developed by one of us, to the deduction of the main normal characteristics of the perturbations that are compatible with a given mean field of pressure and temperature. This deduction comprises the determination: 1) of the mean configuration of the perturbations for the different regions under examination; 2) of the normal deepening and filling regions of the perturbations, and particularly their formation and vanishing focuses; 3) of the mean paths, speeds, frequencies and amplitudes of the perturbations. The «dynamical climatology» we are contemplating here is concerned with all these mean properties of the perturbations for a given period.After a first theoretical part, we give some examples of the application of the general results to the dynamical climatology of January and July for North America, North Atlantic and Europe.

---

---

à ce mémoire a été assigné le Prix 1956 de la « Società Italiana di Geofisica e Meteorologia ».     

The continental record of Ediacaran volcano‐sedimentary successions in southern Brazil and their global implications

The Ediacaran is one of the most important periods on Earth evolution, including the first appearance of soft‐bodied macrofossils, major climatic changes and a supposed rise in free oxygen. In southernmost Brazil, this period is represented by Camaquã Supergroup, including the Bom Jardim Group and the Acampamento Velho Formation, both of which record continental palaeoenvironmental changes in a more than 5000 m thick stratigraphic succession. Age constraints are given by seven Ar‐Ar and U‐Pb determinations on volcanic rocks, which bracket these units between c. 605 and 574 Ma, revealing the best dated and most continuous documented Ediacaran continental succession to date. Depositional systems evolution supports a Phanerozoic‐type glacial context during the last Neoproterozoic glacial event and presents the Picada das Graças Formation (580 ± 3.6 Ma) as the first dated non‐glacial unit coeval to the Gaskiers Formation.     

Vorticity analysis of the Palmi shear zone mylonites: new insights for the Alpine tectonic evolution of the Calabria–Peloritani terrane (southern Italy)

New microstructural data on the mylonites from the well‐exposed Palmi shear zone (southern Calabria) are presented with the aim to shed light on both the kinematics and the geometry of the southwestern branch of the Alpine belt during Eocene. In the study area, located between the Sardinia–Corsica block and the Calabria–Peloritani terrane, previous large‐scale geodynamic reconstructions suggest the presence of strike–slip or transform fault zones dissecting the southwestern branch of the Alpine belt. However, there are no field data supporting the occurrence of these structures. This paper uses vorticity analysis technique based on the aspect ratio and the long axis orientation of rigid porphyroclasts in mylonitic marbles and mylonitic granitoids, to estimate the contribution of pure and simple shear of deformation during the movement of the Palmi shear zone. Porphyroclasts aspect ratio and orientation were measured on thin sections using image analysis. Estimates of the vorticity number, W_m, indicate that the Palmi shear zone recorded general shear with a contribution of pure shear of c. 65%. Then, the Palmi shear zone can be interpreted as a segment of a left‐lateral transpressive bend along the southern termination of the Eocene Alpine front. Copyright © 2015 John Wiley & Sons, Ltd.     

POLARIX: a pathfinder mission of X-ray polarimetry

Since the birth of X-ray astronomy, spectral, spatial and timing observation improved dramatically, procuring a wealth of information on the majority of the classes of the celestial sources. Polarimetry, instead, remained basically unprobed. X-ray polarimetry promises to provide additional information procuring two new observable quantities, the degree and the angle of polarization. Polarization from celestial X-ray sources may derive from emission mechanisms themselves such as cyclotron, synchrotron and non-thermal bremsstrahlung, from scattering in aspheric accreting plasmas, such as disks, blobs and columns and from the presence of extreme magnetic field by means of vacuum polarization and birefringence. Matter in strong gravity fields and Quantum Gravity effects can be studied by X-ray polarimetry, too. POLARIX is a mission dedicated to X-ray polarimetry. It exploits the polarimetric response of a Gas Pixel Detector, combined with position sensitivity, that, at the focus of a telescope, results in a huge increase of sensitivity. The heart of the detector is an Application-Specific Integrated Circuit (ASIC) chip with 105,600 pixels each one containing a full complete electronic chain to image the track produced by the photoelectron. Three Gas Pixel Detectors are coupled with three X-ray optics which are the heritage of JET-X mission. A filter wheel hosting calibration sources unpolarized and polarized is dedicated to each detector for periodic on-ground and in-flight calibration. POLARIX will measure time resolved X-ray polarization with an angular resolution of about 20 arcsec in a field of view of 15 × 15 arcmin and with an energy resolution of 20% at 6 keV. The Minimum Detectable Polarization is 12% for a source having a flux of 1 mCrab and 10⁵ s of observing time. The satellite will be placed in an equatorial orbit of 505 km of altitude by a Vega launcher. The telemetry down-link station will be Malindi. The pointing of POLARIX satellite will be gyroless and it will perform a double pointing during the earth occultation of one source, so maximizing the scientific return. POLARIX data are for 75% open to the community while 25% + SVP (Science Verification Phase, 1 month of operation) is dedicated to a core program activity open to the contribution of associated scientists. The planned duration of the mission is one year plus three months of commissioning and SVP, suitable to perform most of the basic science within the reach of this instrument. A nice to have idea is to use the same existing mandrels to build two additional telescopes of iridium with carbon coating plus two more detectors. The effective area in this case would be almost doubled.     

TitaniQ under pressure: the effect of pressure and temperature on the solubility of Ti in quartz

Quartz and rutile were synthesized from silica-saturated aqueous fluids between 5 and 20 kbar and from 700 to 940°C in a piston-cylinder apparatus to explore the potential pressure effect on Ti solubility in quartz. A systematic decrease in Ti-in-quartz solubility occurs between 5 and 20 kbar. Titanium K-edge X-ray absorption near-edge structure (XANES) measurements demonstrate that Ti⁴⁺ substitutes for Si⁴⁺ on fourfold tetrahedral sites in quartz at all conditions studied. Molecular dynamic simulations support XANES measurements and demonstrate that Ti incorporation onto fourfold sites is favored over interstitial solubility mechanisms. To account for the P–T dependence of Ti-in-quartz solubility, a least-squares method was used to fit Ti concentrations in quartz from all experiments to the simple expression