Nitrate contamination in irrigation groundwater,Isfahan, Iran

Groundwater is one of the major sources of water in Isfahan. Efficient management of these resources requires a good understanding of its status. This paper focuses on the hydrochemistry and also it wants to assess the nitrate concentration in irrigation groundwater of Isfahan suburb. All the groundwater samples are grouped into three categories, including Na-Cl + Ca-Cl (63 %), Na-SO₄ + Ca-SO₄ (23 %) and Ca-HCO₃ (14 %). According to the EC and SAR, the most dominant classes are C3S1, C4S2 and C4S3. 55 % of samples indicate very high salinity and medium to very high alkalinity that is not suitable for irrigation. 84 % of the groundwater samples show nitrate contents higher than HAV (13 mg l^?), while more than 25 % exceeded the maximum contamination level (44.27 mg l^?) according to EPA regulations. The horizontal and vertical distribution patterns of nitrate in groundwater samples show a surficial origin for nitrate contamination. The high nitrate content can be attributed to the agricultural activities along with domestic sewage and industrial wastewaters in populated area. Based on results, using high nitrate groundwater for irrigation can minimize the requirement for inorganic fertilizers and reduce the cost of cultivation and nitrate contamination.     

Rock slope stability and design in Arafat–Muzdalifa area,Saudi Arabia

The present contribution is a complete study extending before, during, and after the excavation of the mountain side that lying north of road 7. It includes slope stability analysis, rock cut design, and rockfall modeling for natural slope and rock cut face. Neoproterozoic granodiorite and biotite granite forming the slope body have medium to very high strengths. Mineral compositions and textures of these intact rocks control the strength values. These rocks are intensively dissected by fractures that are filled with montmorillonite and chlorite. The high plasticity and slippery nature of these filling materials represent the main problem that may face a rock cut designer because they damage the mechanical properties of these fractures. The problem begins with the selection of the rock mass classification that deals with the fracture fillings and extends during the stability analysis and the suggestion of mitigation and supporting measures. The rock masses building the natural slope are suffered by plane, wedge, and toppling failures. Therefore, two rock cut designs are suggested to avoid the hazards related to these failures and considering the construction cost as well. Rockfall modeling for the natural slope and rock cut designs was done to assess the hazards related to these falling of the blocks. The kinetic energy of falling blocks is represented on the roadway by the coverage distance and block rebound amplitude. Slope height has a positive effect on the values of these distance and amplitude, whereas the steepness of berm height has a negative effect on them. Coverage distance is a function to the location of rockfall barrier and to the width of road ditch, while the amplitude controls the barrier height.     

The effect of the geomagnetic activity to the hourly variations of ionospheric foF2 values at low latitudes

In this study, the relationship between the hourly changes of the ionospheric critic frequency values of F2 layers in low latitudes and geomagnetic activity is examined by using statistical methods. The ionospheric critical frequency data has been taken from the Manila (121.1° E, 14.7° N) ionosonde station. In order to investigate the effect of sun activity on ionospheric critical frequency, the data of 1981 when the sun was active and of 1985 when the sun was less active has been used. According to the Granger causality test results, on 5 % significance level, a causality relationship from disturbance storm time (Dst) index values to ionospheric critical frequency values direction has been observed. However, a causality relationship from ionospheric critical frequency values to Dst values has not been observed. From the results of cause-and-effect analysis, it is evaluated that the effect of a shockwave occurring in geomagnetic activity on ionospheric critical frequency continues along 72 h, that is, geomagnetic activity has a long-term effect on ionospheric critical frequency. The response of ionospheric critical frequency to geomagnetic activity substantially depends on seasons. This response is more observed especially in equinox period when the sun is active and in winter months. The increase in geomagnetic activity causes ionospheric critical frequency to decrease in night hours and increase in day hours. The same relationship has not been observed exactly, though observed very little in winter months, for 1985 when the sun was less active.     

Investigation of surface and subsurface displacements due to multiple tunnels excavation in urban area

Underground structures are currently widely used and are built as urbanism develops. The interactions between perpendicularly crossing and parallel tunnels in the Tehran region are investigated by using a full three-dimensional (3D) finite difference analysis with elastic-plastic material models. Special attention is paid to the effect of subsequent tunneling on the support system, i.e., the shotcrete lining and rock bolts of the existing tunnel. Eventually, as the tunnels are excavated at certain levels, the interaction between the tunnels will certainly have a significant influence on both stress distribution and consequently deformations. Since multilayer tunneling is a three-dimensional phenomenon in nature, 3D numerical solutions must be utilized for analyzing effect of perpendicularly crossing tunnels at various levels. As Tohid twin tunnels and Line 7 pass beneath the Line 4 metro tunnel, changes in stress distribution, deformations, and surface settlements are studied for various conditions and the results are presented in this paper. Consequently, it is shown that there is a significant interaction between tunnels that necessitate certain preventive measures to maintain a stable tunneling operation.     

Interactive effect of nitrogen fertilizer and hydrocarbon pollution on soil biological indicators

The investigation of the impact of different forms of nitrogen fertilizer (NO₃-N and NH₄-N) on microbial parameters, enzyme activities and phytotoxicity in a petroleum-contaminated soil was evaluated by an incubation study. The tested enzymes, microbial activity and seed germination index showed different patterns in response to both petroleum and nitrogen fertilizer addition and time of incubation. The results apparently showed that the contamination of soil with petroleum has a negative effect on soil ecosystem. Nitrogen fertilizer could improve inhibition of petroleum hydrocarbons in soil. Nevertheless, nitrogen fertilizer had no significant effect on urease activity in the petroleum-contaminated soil. As compared to NO₃-N, the addition of NH₄-N to the soil resulted in a greater impact on soil performance as attested by the recovery of the soil germination capability and higher values of the respiration. The application of nitrogen fertilizer may be suggested as a good strategy for restoring soils in regions affected by the same problem.     

Change detection and visualization of acid mine lakes using time series satellite image data in geographic information systems (GIS): Can (Canakkale) County,NW Turkey

Can, a county in the province of Canakkale, is one of the most prominent coal mining districts in Turkey. Many mining companies have been operating coal deposits for power generation and district heating in this region since 1980. Generally, small and medium-scale mining companies operate for short periods and abandon the operational land without providing any rehabilitation. Human intervention in the natural structure and topography of the earth surface causes large holes and deterioration in these areas. Artificial lakes occur because of surface discharge and underground leakage into abandoned open pit mines with high lignite sulfur content (0.21–14.36 wt %). Furthermore, these lakes gain acidic character due to acid generation from pyrite oxidation. Acid mine lakes are highly acidic (pH < 3.05) and have elevated concentrations of \({\text{SO}}_{4}^{2 - }\) , Fe and some metals. The main objective of this study is to evaluate the environmental conditions and demonstrate the development of a monitoring system for their possible changes in the acid mine lakes of the open cast lignite mining area on a regional scale. For this purpose, the data received from remote sensing satellites were used. Areal change detection and perimeter changes of nine acid mine lakes caused by coal mining companies in Can from 1977 to 2011, were determined using Landsat, Quickbird and Worldview satellite images. As a case study, an area of 9 km² was chosen for the variety of acid mine lakes. Using GIS software, satellite images were analyzed in time series, borders of acid mine lakes were digitized and converted into vector data format. At this stage, prior to the digitization, in order to create contrast on the satellite images, “stretch type” and “stretch values” were changed. The areal and perimeter changes were computed and presented via tables and graphics. In addition, thematic maps of the acid mine lakes were created and visualized. The results show that the number of acid mine lakes increased and these caused environmental risks due to their hydrochemical properties and areal increments.     

Southeast Bayuda volcano-sedimentary sequences (Kurmut terrane,Sudan): juvenile island arc series within the mega-shear zone marking the eastern boundary of the Saharan Metacraton

This study was conducted to investigate the volcano-sedimentary sequence of Kurmut terrane in southeast Bayuda Desert and its continuation east of the Nile. The sequence is situated at the inferred transition between the Neoproterozoic juvenile Arabian–Nubian Shield and the old reworked Saharan Metacraton. Lithologically, the rocks are composed of intermediate to basic metavolcanics and volcanoclastics intercalated with tuffeous material and metapelite sediments that formed in cyclic graded bedding, indicating a turbid environment in the active orogenic zone. For the first time in the study area, intraformational conglomerates with cigar-shaped volcanic clasts within the low-grade metasediments suggest a high-energy depositional environment. Minerals and textural examination of rock assemblage indicate an anticlockwise P/T condition from amphibolite facies to retrograde greenschist facies conditions in a large high strain zone of distributed deformation. Geochemical results of metavolcanics indicate derivation from different mantle sources (island arc tholeite, calc-alkaline basalt, mid-oceanic ridge, and back-arc basalt). Within this sequence, field relation and microstructural analysis clearly show the best evidence of superimposition of sinistral shear of the NNE–SSW-trending Keraf Shear Zone on the early dextral NE–SW Nakasib Suture Zone. Consequently, based on lithological and structural observations with support of available geochemical data, the volcano-sedimentary sequences SE of Bayuda Desert and east of Nile are similar to their equivalent assemblage of juvenile Neoproterozoic arc lavas association of the Arabian–Nubian Shield.     

A new look on the Jurassic formations of the western part of Iraq

The Jurassic succession of western Iraq includes the Ubaid, Hussainiyat, Amij, Muhaiwir, and Najmah formations. Each formation is composed of basal clastic unit overlain by upper carbonate unit. Extensive and huge erosional unconformity occurred at the Triassic–Jurassic boundary due to marked shifting of structural (E–W) strike of the Triassic (Rhaetic) Zor Hauran Formation to (NE–SW) Jurassic formations. Sea level falling (lowstand system tracts) would result in the progradation of the land on the expense of the sea forming the recognizable progradation of the fluvial and deltaic deposits of the lower clastic units of the Jurassic formations, whereas sea level rising (highstand system tract), i.e., sea prograding, causes deposition of the carbonate units of the Jurassic formations system. This progradation resulted to various carbonate environments of deposition ranging from subtidal, intertidal, to supratidal. The main target on most of the exploration blocks in the western part of Iraq focused on the lower Paleozoic successions, whereas prospects in Triassic, Jurassic, and lower Cretaceous targets are less extensive but may have significant potential on certain blocks in both stratigraphic and structural traps. The western part of Iraq was subjected to intermittent pulses of uplifting (sea regression) and subsidence (sea transgression) to form the Jurassic basin system in the area. The Jurassic formations lack the characteristics of petroleum systems. In contrast, in the central and northern parts of Iraq, the Jurassic formations (Najmah and Gotnia formations) were deposited in subsiding basins in which the reservoir and sealed evaporitic rocks existed. In turn, in the western desert of Iraq, the Jurassic formations lack these petroleum system characteristics. Hence, it can be proposed that the petroleum–nonpetroleum inflection could be proposed in the east of area km 160.     

Spectral wheat yield prediction modeling using SPOT satellite imagery and leaf area index

As wheat represents the main staple food and strategic crop in Egypt and worldwide and since remote sensing satellite imagery is the tool to obtain synoptic, multi-temporal, dynamic, and time-efficient information about any target on the Earth, the main objective of the current study is to use remote sensing satellite imagery to generate remotely sensed empirical preharvest wheat yield prediction models. The main input parameters of these models are spectral data either in the form of spectral reflectance data released from Satellite Pour l’Observation de la Terre (SPOT) 4 satellite imagery or in the form of spectral vegetation indices. The other input factor is leaf area index (LAI) that was measured by LAI Plant Canopy Analyzer. The four spectral bands of SPOT4 imagery are green, red, near-infrared, and middle infrared; the five vegetation indices that are forms of ratios between red and near-infrared bands are normalized difference vegetation index, ratio vegetation index, soil-adjusted vegetation index, difference vegetation index, and infrared percentage vegetation index. Another vegetation index is green vegetation index that is calculated through a ratio between green band and near-infrared band. Each of the above-mentioned factors was used as an input factor against wheat yield to generate wheat yield prediction models. All generated models are site-specific limited to the area and the environment and could be applicable under similar conditions in Egypt. The study was carried out in Sakha experimental station by using the dataset from two wheat season 2007/2008 and 2009/2010. The total wheat area was 1.3 ha cultivated by Sakha 93 cultivar. Modeling and validation process were carried out for each season independently. Modeled yield was tested against reported yield through two common statistical tests; the standard error of estimate between modeled yield and reported yield, and the correlation coefficient for a direct regression analysis between modeled and reported yield with each generated model. Generally, as shown from the correlation coefficient of the generated models, green and middle infrared bands did not show good accuracy to predict wheat yield, while the other spectral bands (red and near-infrared) bands showed high accuracy and sufficiency to predict yield. This was proven through the correlation coefficient of the generated models and through the generated models with the wheat crops for the two seasons. Accordingly, the green vegetation index that is generally calculated from green and near-infrared bands showed relatively lower accuracy than the rest of the vegetation index models that are calculated from red and near-infrared bands. LAI showed high accuracy to predict yield as shown from the statistical analysis. The models are applicable after 90 days from sowing stage and applicable in similar regions with the same conditions.     

The effects of method of generating circular slip surfaces on determining the critical slip surface by particle swarm optimization

The main objectives of slope stability analysis are evaluating factor of safety for a given slip surface and determining the critical slip surface for a given slope. Factor of safety is usually calculated by limit equilibrium method. The main steps to determine the critical slip surface are generating trial slip surfaces as probable solutions and searching among them to determine the one with the lowest factor of safety. Although the process of searching the critical slip surface received much attention between researchers, the significance of method of generating slip surfaces is seldom addressed in the literature. The authors believe that this ignorance can affect the accuracy of the results of slope stability analysis even in the simplest problems with circular slip surfaces. Consequently, this paper focused on the method of generating circular trial slip surfaces as the simplest mechanism of sliding and considered its effect on determining the critical slip surface. A new method of generating circular slip surface was presented, which is more efficient and less restricted than the conventional method. A computer program was also developed to determine the critical slip surface of slopes by using particle swarm optimization. The performances of the proposed method and developed computer program were verified during comparative studies and sensitivity analysis. Based on the results, the effect of method of generating circular slip surfaces on determining the critical slip surface was confirmed successfully. In all considered problems, the proposed method of generating circular slip surfaces led to the lower values of factor of safety compare with the conventional method.