The aluminosilicate fraction of North Pacific manganese nodules

Nine nodules collected from throughout the deep North Pacific were analyzed for their mineralogy and major-element composition before and after leaching with Chester-Hughes solution. Data indicate that the mineral phillipsite accounts for the major part (> 75%) of the aluminosilicate fraction of all nodules. It is suggested that formation of phillipsite takes place on growing nodule surfaces coupled with the oxidation of absorbed manganous ion. All the nodules could be described as ternary mixtures of amorphous iron fraction (Fe-Ti-P), manganese oxide fraction (Mn-Mg Cu-Ni), and phillipsite fraction (Al-Si-K-Na), these fractions accounting for 96% of the variability of the chemical composition.     

Sedimentary architecture and genesis of Holocene shallow-water mud-mounds, northern Belize

Abstract Cangrejo and Bulkhead Shoals are areally extensive, Holocene biodetrital mud‐mounds in northern Belize. They encompass areas of 20 km² and 35 km² in distal and proximal positions, respectively, on a wide and shallow‐water, microtidal carbonate shelf where storms are the major process affecting sediment dynamics. Sediments at each mound are primarily biodetrital and comprise part of a eustatically forced, dominantly subtidal cycle with a recognizable deepening‐upward transgressive systems tract, condensed section and shallowing‐upward highstand systems tract. Antecedent topographic relief on Pleistocene limestone bedrock also provided marine accommodation space for deposition of sediments that are a maximum of 7·6 m thick at Cangrejo and 4·5 m thick at Bulkhead. Despite differences in energy levels and location, facies and internal sedimentological architectures of the mud‐mounds are similar. On top of Pleistocene limestone or buried soil developed on it are mangrove peat and overlying to laterally correlative shelly gravels. Deposition of these basal transgressive, premound facies tracked the rapid rate of sea‐level rise from about 6400–6500 years BP to 4500 years BP, and the thin basal sedimentation unit of the overlying mound‐core appears to be a condensed section. Following this, the thick and complex facies mosaic comprising mound‐cores represents highstand systems tract sediments deposited in the last ≈ 4500 years during slow and decelerating sea‐level rise. Within these sections, there is an early phase of progradationally offlapping catch‐up deposition and a later (and current) phase of aggradational keep‐up deposition. The mound‐cores comprise stacked storm‐deposited autogenic sedimentation units, the upper bounding surfaces of which are mostly eroded former sediment–water interfaces below which depositional textures have largely been overprinted by biogenic processes associated with Thalassia‐colonized surfaces. Vertical stacking of these units imparts a quasi‐cyclic architecture to the section that superficially mimics metre‐scale parasequences in ancient rocks. The locations of the mud‐mounds and the tidal channels transecting them have apparently been stable over the last 50 years. Characteristics that might distinguish these mud‐mounds and those mudbanks deposited in more restricted settings such as Florida Bay are their broad areal extent, high proportion of sand‐size sediment fractions and relatively abundant biotic particles derived from adjoining open shelf areas.     

Insights into the formation of silica‐rich achondrites from impact melts in Rumuruti‐type chondrites

Ancient, SiO₂‐rich achondrites have previously been proposed to have formed by disequilibrium partial melting of chondrites. Here, we test the alternative hypothesis that these achondrites formed by fractional crystallization of impact melts of Rumuruti (R) chondrites. We identified two new melt clasts in R chondrites, one in Pecora Escarpment (PCA) 91241 and one in LaPaz Icefield (LAP) 031275. We analyzed major, minor, and trace element concentrations, as well as oxygen isotopes, of these two clasts and a third one that had been previously recognized (Bischoff et al. 2011) as an impact melt in Dar al Gani (DaG) 013. The melt clast in PCA 91241 is an R chondrite impact melt closely resembling the one previously recognized in DaG 013. The melt clast in LAP 031275 has an L chondrite provenance. We show that SiO₂‐rich melts could form from the mesostases of R chondrite impact melts. However, their CI‐normalized rare earth element patterns are flat, whereas those of ancient SiO₂‐rich achondrites (Day et al. 2012; Srinivasan et al. 2018) and those of disequilibrium partial melts of chondrites (Feldstein et al. 2001) have positive Eu anomalies from preferential melting of plagioclase. Thus, we conclude that ancient SiO₂‐rich achondrites were probably formed by disequilibrium partial melting (due to an internal heat source on their parent bodies), rather than from impact melts.     

Accretion of differentiated achondritic and aqueously altered chondritic materials in the early solar system—Significance of an igneous fragment in the CM chondrite NWA 12651

One approach to decipher the dynamics of material transport and planetary accretion in the early solar system is to investigate xenolithic fragments in meteorites. In this work, we examined an igneous fragment from the NWA 12651 meteorite—the first igneous fragment found in any CM chondrite—by analyzing its mineralogy, rare earth elements (REEs), and O‐isotopes. The study shows that the exsolution lamellae of the igneous fragment consist of Fe‐rich and Ca‐rich pyroxene. Thus, the fragment was part of a progressive crystallization in a closed system, such as in a depleted magma reservoir or mantle. In this environment, the pyroxene co‐crystallized with plagioclase, resulting in a negative Eu anomaly and enrichment of the heavy REEs compared to the light REEs. The O‐isotopes of the fragment are more ¹⁶O‐enriched than the mafic minerals in the matrix or in other bulk CM chondrites; therefore, the fragment was formed in a different region than the NWA 12651 parent body. The iron meteorites Tucson and Deep Springs, the pallasite Milton, and the CB chondrites have similar O‐isotopes as the igneous fragment. However, no direct connection can be drawn and it is questionable if the fragment shares a same parent body with one of these meteorites. The close formation region to the CB chondrites may suggest a formation of the fragment in the carbonaceous chondrite region. Thus, a wide transport through the nebula of the early solar system may not have been necessary to move the fragment to the CM chondrite formation region.     

Chemical variations of sulfides and metal in enstatite chondrites—Introduction of a new classification scheme

In this study, the metal and sulfide compositions of 45 enstatite chondrites were analyzed to determine possible mineral-chemical trends correlated with the petrologic type. Data for 35 additional samples were taken from the literature. Considering the data from this huge number of different E chondrite samples (80 in total), none of the trends previously described in the literature could be clearly confirmed. Also, among the opaque phases of enstatite chondrites, no other “new” correlations between mineral chemistry and the petrologic type were found. However, major differences in the sulfide and metal chemistry became obvious. Specifically, a certain number of chondrites in the EH and the EL groups have Cr in troilite above 2 wt%, Fe in niningerite or alabandite above 20 wt%, and lack abundant daubréelite. Differences were also found for Ni concentrations in kamacite. Thus, we propose a system for classifying E chondrites by defining four major subgroups: EH_a, EL_a, EH_b, and EL_b. All subgroups show full petrologic sequences that are similar to each other. This observation, in combination with the differences in sulfide and metal chemistry, suggests an origin of the samples from different parent bodies. Considering the anomalous E chondrite samples that neither fit in the previous classification scheme nor in the new one described here, the samples investigated in this study require at least eight different parent bodies.     

Differential stemflow yield from European beech saplings: the role of individual canopy structure metrics

Stemflow production is affected by a suite of biotic and abiotic factors. It has proven difficult to determine the importance of individual canopy structure metrics on stemflow production. The disentanglement of the role and importance of individual canopy structure metrics would advance our understanding of the dynamics of stemflow production. This work employed ten isolated (i.e. no overlapping crowns) experimental European beech (Fagus sylvatica L.) saplings to examine the effects of various canopy structural metrics on stemflow production in east‐central Germany. The following canopy structural metrics were utilized in a hierarchical cluster analysis using Ward's method to separate the saplings into groups: primary branch count per unit projected crown area, secondary branch count per unit projected crown area, total branch count per unit projected crown area, mean branch inclination angle, minimum branch inclination angle, maximum branch inclination angle, total dry woody biomass per unit projected crown area, total foliar dry biomass per unit projected crown area and total dry biomass per unit projected crown area. Cluster group means revealed that saplings, which generate the largest stemflow yields, once controlled for sapling size, have straighter boles (but some trunk lean), more steeply inclined branches, a larger number of branches, more woody surface area and fewer numbers of leaves. Our results may prove valuable as a guide to researchers wishing to couple LiDAR and fine‐scale architectural models with the canopy metrics that govern stemflow to provide a better understanding of the canopy on the hydrology and biogeochemistry of forests. Copyright © 2013 John Wiley & Sons, Ltd.     

Cosmic ray exposure ages of Rumuruti chondrites from North Africa

We analyzed noble gases and determined ³He, ²¹Ne, and ³⁸Ar cosmic ray exposure ages (CREAs) of Rumuruti chondrites from North West Africa (NWA) to rule on potential pairings and/or source pairings of North Africa R chondrite samples. The ²¹Ne exposure ages range between 10 and 74 Ma, with NWA 2897 and 1668 having the highest known exposure ages among R chondrites. We also include other R chondrites from North Africa (Schultz et al., 2005) and, based on their noble gas characteristics and their ²¹Ne CREAs, propose pairings of the following samples: NWA 2198, 5069, 755, 4615, 845, 851, 978, 1471, and possibly DaG 013 belonging to one fall with a CREA of ∼10 Ma, and NWA 753, 4360, 4419, 5606, 1472, 1476, 1477, 1478, and 1566 representing one fall with a CREA of ∼14 Ma. NWA 2821, 2503, 2289, 3364, 3146, 4619, 4392, 3098, and 2446 seem to belong to one single fall with a CREA of ∼20 Ma, and NWA 2897 and 1668 seem to be paired and show a common CREA of ∼66 Ma. Overall, all R chondrite samples from North Africa analyzed for noble gases so far represent ∼16 individual falls. Comparing falls from North Africa to literature CREAs of R chondrites worldwide, it seems possible that a significant number of all R chondrite falls studied for noble gases were ejected from the R chondrite parent body during one large collisional event between 15 and 25 Ma ago. However, the database is still too small to draw definitive conclusions. The large portion of brecciated R chondrites in collections suggests severe impact brecciation of the R chondrite parent body.     

Si‐bearing metal and niningerite in Almahata Sitta fine‐grained ureilites and insights into the diversity of metal on the ureilite parent body

A detailed mineralogical and chemical study of Almahata Sitta fine‐grained ureilites (MS‐20, MS‐165, MS‐168) was performed to shed light on the origin of these lithologies and their sulfide and metal. The Almahata Sitta fine‐grained ureilites (silicates <30 μm grain size) show textural and chemical evidence for severe impact smelting as described for other fine‐grained ureilites. Highly reduced areas in Almahata Sitta fine‐grained ureilites show large (up to ～1 mm) Si‐bearing metal grains (up to ～4.5 wt% Si) and niningerite [Mg_>0.5,(Mn,Fe)_<0.5S] with some similarities to the mineralogy of enstatite (E) chondrites. Overall, metal grains show a large compositional variability in Ni and Si concentrations. Niningerite grains probably formed as a by‐product of smelting via sulfidation. The large Si‐Ni variation in fine‐grained ureilite metal could be the result of variable degrees of reduction during impact smelting, inherited from coarse‐grained ureilite precursors, or a combination of both. Large Si‐bearing metal grains probably formed via coalescence of existing and newly formed metal during impact smelting. Bulk and in situ siderophile trace element abundances indicate three distinct populations of (1) metal crystallized from partial melts in MS‐20, (2) metal resembling bulk chondritic compositions in MS‐165, and (3) residual metal in MS‐168. Almahata Sitta fine‐grained ureilites developed their distinctive mineralogy due to severe reduction during smelting. Despite the presence of E chondrite and ureilite stones in the Almahata Sitta fall, a mixing relation of E chondrites or their constituents and ureilite material in Almahata Sitta can be ruled out based on isotopic, textural, and mineral‐chemical reasons.     

Noble gas studies in CAIs from CV3 chondrites: No evidence for primordial noble gases

Abstract— Calcium‐aluminum‐rich inclusions (CAIs) were among the first solids in the solar system and were, similar to chondrules, created at very high temperatures. While in chondrules, trapped noble gases have recently been detected, the presence of trapped gases in CAIs is unclear but could have important implications for CAI formation and for early solar system evolution in general. To reassess this question, He, Ne, and Ar isotopes were measured in small, carefully separated and, thus, uncontaminated samples of CAIs from the CV3 chondrites Allende, Axtell, and Efremovka. The ²⁰Ne/²²Ne ratios of all CAIs studied here are <0.9, indicating the absence of trapped Ne as, e.g., Ne‐HL, Ne‐Q, or solar wind Ne. The ²¹Ne/²²Ne ratios range from 0.86 to 0.72, with fine‐grained, more altered CAIs usually showing lower values than coarse‐grained, less altered CAIs. This is attributed to variable amounts of cosmogenic Ne produced from Na‐rich alteration phases rather than to the presence of Ne‐G or Ne‐R (essentially pure ²²Ne) in the samples. Our interpretation is supported by model calculations of the isotopic composition of cosmogenic Ne in minerals common in CAIs. The ³⁶Ar/³⁸Ar ratios are between 0.7 and 4.8, with fine‐grained CAIs within one meteorite showing higher ratios than the coarse‐grained ones. This agrees with higher concentrations of cosmogenic ³⁶Ar produced by neutron capture on ³⁵Cl with subsequent β^?‐decay in finer‐grained, more altered, and thus, more Cl‐rich CAIs than in coarser‐grained, less altered ones. Although our data do not strictly contradict the presence of small amounts of Ne‐G, Ne‐R, or trapped Ar in the CAIs, our noble gas signatures are most simply explained by cosmogenic production, mainly from Na‐, Ca‐, and Cl‐rich minerals.