Short-term variations of some UV-ceti type flare stars

Sinusoidal variations in bothV - andB-bands were detected in some flare stars of the UV Ceti type outside of flares. This detection has confirmed the light variation detection in Johnson'sV -band in EV Lac at quiet-state luminosity by Pettersen (1980) with a cyclic period equals about 4 _. ^d 378 and an amplitude of about 0 _. ^m 07. An interpretation of these short cyclic periods is that they are due to intensity modulations from a photospheric spot group as a result of stellar equatorial rotations. A short period of 14 days with an amplitude of 0 _. ^m 099 was detected inB-band in AD Leo. For the two flare stars, BD+55° 1823 and DO Cep in bothV- andB-bands, cyclic periods of more than 3 days and less than 17 days with amplitudes more than 0 _. ^m 090 and less than 0 _. ^m 250 have been registered. A significant contribution has been found in the flare star EV Lac in bothV- andB-bands at its quiescent-state luminosity where the detected cyclic periods are agreed with that which was detected by Pettersen (1980) in the same flare star in Johnson'sV-band, about 4 days. Furthermore, we found the same cyclic period in the colour index,B - V (about 4 days) which strengthens starspot phenomenon. This colour index period could not be detected by Pettersen (1980).     

Factors affecting seasonal patterns in epilimnion zooplankton community in one of the largest man-made lakes in Africa (Lake Nasser, Egypt)

The objective of the study was to determine which factors regulate zooplankton organisms along Lake Nasser. Temperature, pH, DO, conductivity, turbidity, nutrients, and zooplankton abundance were measured. Twenty-three species of zooplankton were recorded in Lake Nasser included in Copepoda, Cladocera and Rotifera. Copepoda represented the main bulk of the community. The lowest standing stock of zooplankton was noticed during spring due to the highest fish predation during this season associated with the lowest turbidity. Big difference in temperature in Lake Nasser along the year round is considered as a controlling factor related to range of tolerance of species. The oscillation of the lake water level and the different factors affect the standing stock of zooplankton in the lake. Thus, continuous monitoring of Lake Nasser biota should be undertaken to follow the changes in the ecosystem.     

Holocene stromatolites and microbial laminites associated with lenticular gypsum in a marine-dominated environment, Ras El Shetan area, Gulf of Aqaba, Egypt

Field and petrographic investigations of Holocene evaporites in the Ras El Shetan area, Gulf of Aqaba, Egypt, indicate the presence of microbial mats either in the form of laminites or stromatolites. The morphology of microbial mats and gypsum crystal size characterize the following lithofacies: (1) slump-stromatolitic gypsarenite, (2) random gypsrudite, (3) stromatolitic gypsarenite, and (4) microbially laminated gypsrudite. These evaporite lithofacies are formed above pre-evaporitic mudstones rich in disrupted cyanobacterial filaments, burrows and cerithid gastropods. The morphology of the gypsum crystals is mainly lenticular, indicating enrichment of dissolved organic compounds in the depositional environment. The difference in size of the lenticular gypsum crystals is related to minor changes in salinity and temperature of the parent brine. Fluid inclusions in gypsum crystals indicate their formation at low temperature (<50°C) in a seawater sourced brine that evaporated to gypsum saturation or higher. The brine salinities range from 10·62 to 12·99 equivalent wt% NaCl, and the brine densities range from 1·08 to 1·11 g/cm³. The change in morphology of the microbial mats (stromatolites and laminites) is related mainly to changes in water depth, from a very shallow salina to a coastal sabkha. Lenticular gypsum nucleated displacively in the microbial mats from saline, oxygenated groundwater that seeped from the sea through a barrier.     

Numerical Prediction of Induced Pressure and Lift of the Planing Surfaces

This paper discusses the numerical prediction of the induced pressure and lift of the planing surfaces in a steady motion based on the potential flow solver as well as the spray drag by use of the practical method.The numerical method for computation of the induced pressure and lift is potential-based boundary element method.Special technique is identified to present upwash geometry and to determine the spray drag.Numerical results of a planing flat plate and planing craft model 4666 are presented.It is shown that the method is robust and efficient and the results agree well with the experimental measurements with various Froude humors.     

Application of Rock Mass Characterization for Determining the Mechanical Properties of Rock Mass: a Comparative Study

The results of geotechnical explorations, engineering geological investigation (including laboratory and in situ tests) and field observations have been used, along with borehole logging charts, to obtain the rock mass geotechnical data. Based on the data, the rock mass along the Sabzkuh water conveyance tunnel route was classified by rock mass rating (RMR), Q-system (Q), rock mass index (RMi) and geological strength index (GSI) (3 methods). A new series of correlations were established between the systems based on the data collected from the study area. These relationships were then compared with those reported in the literature, and two new relations were recommended. The classifications were utilized to calculate mechanical properties (rock mass strength and deformation modulus) of the rock mass along the tunnel according to available empirical relations, and to distinguish the upper-bound and lower-bound relations.     

Analysis and characterization of the synergistic AIRS and MODIS cloud-cleared radiances

The Atmospheric Infrared Sounder (AIRS) and MODerate-Resolution Imaging Spectroradiometer (MODIS) on board NASA Earth Observing System (EOS) Aqua spacecraft measure the upwelling infrared radiance used for numerous remote-sensing- and climate-related applications. AIRS provides high spectral resolution infrared radiances, while MODIS provides collocated high spatial resolution radiances at 16 broad infrared bands. An optimal algorithm for cloud-clearing has been developed for AIRS cloudy soundings at the University of Wisconsin-Madison, where the spatially and spectrally collocated AIRS and MODIS data has been used to analyze the characteristic of this algorithm. An analysis and characterization of the global AIRS cloud-cleared radiances using the bias and the standard deviation between the cloud-cleared and the nearby clear measurements are studied. Scene inhomogeneity for both land- and water-surface types has been estimated to account for the assessed error. Both monthly and seasonal changes of global AIRS/MODIS cloud-clearing performance also have been analyzed.     

Heavy metal and anionic contamination in the water and sediments in Al-Mujib reservoir,central Jordan

Sixty-five sediment samples and 25 water samples were collected from Al-Mujib reservoir, central Jordan, in order to investigate the heavy metal and ionic contamination assessment. Therefore, to achieve this aim, water and sediment samples were collected during winter and summer seasons (2007) from Al-Mujib reservoir and the areas surrounding it. The study shows that there are elevated levels of SO₄ ²⁻, Cl⁻ and Na⁺ in reservoir water, which might originate from anthropogenic activities in the reservoir catchment area. In addition, the reservoir water has higher total hardness (TH) values together with high Ca and Mg contents. This might be attributed to pH of reservoir water and the nature of the rocks exposed in the catchment area. The average levels of heavy metals in reservoir sediments are Fe = 14,888.1, Cu = 17.8, Zn = 88.6, Ni = 38.7, Cd = 4.4, Mn = 337.9 and Pb = 6.1 mg/kg, which are lower than that observed in Wadi Al-Arab reservoir, northern Jordan. The values of enrichment factor are Cd = 35.5, Ni = 3.02, Zn = 2.54, Cu = 1.26, Mn = 1.2 and Pb = 0.57; these values indicate that heavy metals in sediments of Al-Mujeb reservoir have a different anthropogenic incrimination inputs. The study showed that the sediments are polluted with Cd, relatively contaminated with Ni and Zn and uncontaminated with respect to Mn, Pb and Cu.     

Effect of moderate shock waves on magnetic susceptibility and microstructure of a magnetite‐bearing ore

This study demonstrates a relationship between changes of magnetic susceptibility and microstructure developing in minerals of a magnetite‐bearing ore, experimentally shocked to pressures of 5, 10, 20, and 30 GPa. Shock‐induced effects on magnetic properties were quantified by bulk magnetic susceptibility measurements while shock‐induced microstructures were studied by high‐resolution scanning electron microscopy. Microstructural changes were compared between magnetite, quartz, amphibole, and biotite grains. In the 5 GPa sample, a sharp drop of magnetic susceptibility correlates with distinct fragmentation as well as with formation of shear bands and twins in magnetite. At 10 GPa, shear bands and twins in magnetite are accompanied by droplet‐shaped nanograins. In this shock pressure regime, quartz and amphibole still show intensive grain fragmentation. Twins in quartz and foam‐shaped, highly porous amphibole are formed at 20 and 30 GPa. The formation of porous minerals suggests that shock heating of these mineral grains resulted in localized temperature spikes. The identified shock‐induced features in magnetite strongly advise that variations in the bulk magnetic susceptibility result from cooperative grain fragmentation, plastic deformation and/or localized amorphization, and probably postshock annealing. In particular, the increasing shock heating at high pressures is assumed to be responsible for a partial defect annealing which we suggest to be responsible for the almost constant values of magnetic susceptibility above 10 GPa.     

Petrogenesis of the Az Zabirah south zone bauxite ore deposits,central northern Saudi Arabia

Arabian Journal of Geosciences - The bauxite ore deposits are mainly found around the Az Zabirah area in the central northern part of Saudi Arabia. The age of the Az Zabirah bauxites was suggested...