Constraining peak P–T conditions in UHP eclogites: calculated phase equilibria in kyanite‐ and phengite‐bearing eclogite of the Tromsø Nappe,Norway

Kyanite‐ and phengite‐bearing eclogites have better potential to constrain the peak metamorphic P–T conditions from phase equilibria between garnet + omphacite + kyanite + phengite + quartz/coesite than common, mostly bimineralic (garnet + omphacite) eclogites, as exemplified by this study. Textural relationships, conventional geothermobarometry and thermodynamic modelling have been used to constrain the metamorphic evolution of the Tromsdalstind eclogite from the Tromsø Nappe, one of the biggest exposures of eclogite in the Scandinavian Caledonides. The phase relationships demonstrate that the rock progressively dehydrated, resulting in breakdown of amphibole and zoisite at increasing pressure. The peak‐pressure mineral assemblage was garnet + omphacite + kyanite + phengite + coesite, inferred from polycrystalline quartz included in radially fractured omphacite. This omphacite, with up to 37 mol.% of jadeite and 3% of the Ca‐Eskola component, contains oriented rods of silica composition. Garnet shows higher grossular (X_Grs = 0.25–0.29), but lower pyrope‐content (X_Prp = 0. 37–0.39) in the core than the rim, while phengite contains up to 3.5 Si pfu. The compositional isopleths for garnet core, phengite and omphacite constrain the P–T conditions to 3.2–3.5 GPa and 720–800 °C, in good agreement with the results obtained from conventional geothermobarometry (3.2–3.5 GPa & 730–780 °C). Peak‐pressure assemblage is variably overprinted by symplectites of diopside + plagioclase after omphacite, biotite and plagioclase after phengite, and sapphirine + spinel + corundum + plagioclase after kyanite. Exhumation from ultrahigh‐pressure (UHP) conditions to 1.3–1.5 GPa at 740–770 °C is constrained by the garnet rim (X_Ca^Grt = 0.18–0.21) and symplectite clinopyroxene (X_Na^Cpx = 0.13–0.21), and to 0.5–0.7 GPa at 700–800 °C by sapphirine (X_Mg = 0.86–0.87) and spinel (X_Mg = 0.60–0.62) compositional isopleths. UHP metamorphism in the Tromsø Nappe is more widespread than previously known. Available data suggest that UHP eclogites were uplifted to lower crustal levels rapidly, within a short time interval (452–449 Ma) prior to the Scandian collision between Laurentia and Baltica. The Tromsø Nappe as the highest tectonic unit of the North Norwegian Caledonides is considered to be of Laurentian origin and UHP metamorphism could have resulted from subduction along the Laurentian continental margin. An alternative is that the Tromsø Nappe belonged to a continental margin of Baltica, which had already been subducted before the terminal Scandian collision, and was emplaced as an out‐of‐sequence thrust during the Scandian lateral transport of nappes.     

P–T evolution of kyanite eclogite from the Pirin Mountains (SW Bulgaria): implications for the Rhodope UHP Metamorphic Complex

A new occurrence of kyanite eclogite in the Pirin Mountains of southwestern Bulgaria within the rocks belonging to the Obidim Unit of the Rhodope Metamorphic Complex is presented. This eclogite provides important information about the peak–pressure conditions despite strong thermal overprint at low pressure. Textural relationships, phase equilibrium modelling and conventional geothermobarometry were used to constrain the metamorphic evolution. Garnet porphyroblasts with inclusions of omphacite (up to 43 mol.% Jd), phengite (up to 3.5 Si p.f.u.), kyanite, polycrystalline quartz, pargasitic amphibole, zoisite and rutile in the Mg‐rich cores (X_Mg = 0.44–0.46) record a prograde increase in P–T conditions from ～2.5 GPa and 650 °C to ～3 GPa and 700–750 °C. Maximum pressure values fall within the stability field of coesite. During exhumation, the peak–pressure assemblage garnet + omphacite + phengite + kyanite was variably overprinted by a lower pressure one forming symplectitic textures, such as diopside + plagioclase after omphacite and biotite + plagioclase after phengite. The development of spinel (X_Mg = 0.4–0.45) + corundum + anorthite assemblage in the kyanite‐bearing domains at ～1.1 GPa and 800–850 °C suggests a thermal overprint in the high‐pressure granulite facies stability field. This thermal event was followed by cooling at ～0.8 GPa under amphibolite facies conditions; retrograde kelyphite texture involving plagioclase and amphibole was developed around garnet. Our results add to the already existing evidence for ultra high pressure (UHP) metamorphism in the Upper Allochthon of the Rhodope Metamorphic Complex as in the Kimi Unit and show that it is more widespread than previously known. Published age data and field structural relations suggest that the Obidim Unit represents Variscan continental crust involved into the Alpine nappe edifice of the Rhodopes and that eclogite facies metamorphism was Palaeozoic, in contrast to the Kimi Unit where age determinations suggest a Jurassic or Cretaceous age for UHP metamorphism. This implies that UHP metamorphism in the Upper Allochthon of the Rhodopes may have occurred twice, during Alpine and pre‐Alpine orogenic events, and that two independent HP/UHP provinces of different age overlap in this area.     

Coastal and estuarine habitat mapping, using LIDAR height and intensity and multi-spectral imagery

The airborne laser scanning LIDAR (LIght Detection And Ranging) provides high-resolution Digital Terrain Models (DTM) that have been applied recently to the characterization, quantification and monitoring of coastal environments. This study assesses the contribution of LIDAR altimetry and intensity data, topographically-derived features (slope and aspect), and multi-spectral imagery (three visible and a near-infrared band), to map coastal habitats in the Bidasoa estuary and its adjacent coastal area (Basque Country, northern Spain). The performance of high-resolution data sources was individually and jointly tested, with the maximum likelihood algorithm classifier in a rocky shore and a wetland zone; thus, including some of the most extended Cantabrian Sea littoral habitats, within the Bay of Biscay. The results show that reliability of coastal habitat classification was more enhanced with LIDAR-based DTM, compared with the other data sources: slope, aspect, intensity or near-infrared band. The addition of the DTM, to the three visible bands, produced gains of between 10% and 27% in the agreement measures, between the mapped and validation data (i.e. mean producer's and user's accuracy) for the two test sites. Raw LIDAR intensity images are only of limited value here, since they appeared heterogeneous and speckled. However, the enhanced Lee smoothing filter, applied to the LIDAR intensity, improved the overall accuracy measurements of the habitat classification, especially in the wetland zone; here, there were gains up to 7.9% in mean producer's and 11.6% in mean user's accuracy. This suggests that LIDAR can be useful for habitat mapping, when few data sources are available. The synergy between the LIDAR data, with multi-spectral bands, produced high accurate classifications (mean producer's accuracy: 92% for the 16 rocky habitats and 88% for the 11 wetland habitats). Fusion of the data enabled discrimination of intertidal communities, such as Corallina elongata, barnacles (Chthamalus spp.), and stands of Spartina alterniflora and Phragmites australis, which presented misclassification when conventional visible bands were used alone. All of these results were corroborated by the kappa coefficient of agreement. The high classification accuracy found here, selecting data sources, highlights the value of integrating LIDAR data with multi-spectral imagery for habitat mapping in the intertidal complex fringe.     

Local disappearance of bivalves in the Azores during the last glaciation

The Pleistocene (Eemian) outcrops of Lagoinhas and Prainha, located at Santa Maria Island (Azores), were investigated and their fossil mollusc content reported. These studies revealed that the last glaciation affected two groups of molluscs: the ‘warm‐guest’ gastropods with West African or Caribbean affinities (e.g. Conus spp., Cantharus variegatus, Bulla amygdala, Trachypollia nodulosa) and shallow bivalve species mainly associated with sandy habitats (Ensis minor, Lucinella divaricata, and probably Laevicardium crassum). In this paper we focus on this group of bivalves, which has since locally disappeared from the Azores. We relate the local disappearance of these bivalves in the Azores with the lack of sand in the shelf. The specific characteristics of the Santa Maria shelf combined with the sea‐level drop during the Weichselian prevented deposition of the lowstand deposits and permitted erosion of the previous ones, leaving the shelf without a sediment cover. Copyright © 2008 John Wiley & Sons, Ltd.     

Medium- and Long-term Recovery of Estuarine and Coastal Ecosystems: Patterns,Rates and Restoration Effectiveness

Many estuarine and coastal marine ecosystems have increasingly experienced degradation caused by multiple stressors. Anthropogenic pressures alter natural ecosystems and the ecosystems are not considered to have recovered unless secondary succession has returned the ecosystem to the pre-existing condition or state. However, depending upon the scales of time, space and intensity of anthropogenic disturbance, return along the historic trajectory of the ecosystem may: (1) follow natural restoration though secondary succession; (2) be re-directed through ecological restoration, or (3) be unattainable. In order to address the gaps in knowledge about restoration and recovery of estuarine and coastal ecosystems, this special feature includes the present overview and other contributions to provide a synthesis of our knowledge about recovery patterns, rates and restoration effectiveness. From the 51 examples collated in this contribution, we refine the recovery from the list of stressors into six recovery mechanisms: (1) recovery from sediment modification, which includes all aspects of dredging and disposal; (2) recovery by complete removal of stressors limiting natural ecosystem processes, which includes tidal marsh and inundation restoration; (3) recovery by speed of organic degradation, which includes oil discharge, fish farm wastes, sewage disposal, and paper mill waste; (4) recovery from persistent pollutants, which includes chemical discharges, such as TBT; (5) recovery from excessive biological removal, related to fisheries and (6) recovery from hydrological and morphological modification. Drawing upon experience both from these many examples and from an example of one comprehensive study, we show that although in some cases recovery can take <5 years, especially for the short-lived and high-turnover biological components, full recovery of coastal marine and estuarine ecosystems from over a century of degradation can take a minimum of 15–25 years for attainment of the original biotic composition and diversity may lag far beyond that period.     

Soil and vegetation seasonal changes in the grazing Andean Mountain grasslands

Andean grasslands ecosystems are fragile environments with rigorous climatologic conditions and low and variable food for the grazing. The Apolobamba area is located in the Bolivian Andean Mountains. Its high grasslands provide a natural habitat for wild and domestic camelids such as vicuna（Vicugna vicugna） and alpaca（Lama pacos）. The botanical diversity plays an essential role in maintaining vital ecosystem functions. The objectives of this research were to determine the seasonal changes in soil properties, to study the vegetation changes during the wet and dry seasons and the influence of soil properties and camelid densities on the vegetation in the Apolobamba grasslands. Four zones with different vicuna populations were selected to be studied. The following soil parameters were determined： total organic carbon, total nitrogen, available phosphorous, cation exchange capacity, exchangeable cations, pH and texture. The vegetation season changes were studied through botanical identification, above-ground biomass, plant cover and species richness. Results showed that some soil properties such as C/N ratio, CEC, silt and clay percentages kept stable against the seasonal changes. Generally, soil nutrients were relatively higher during the dry season in the surface and subsurface. The results did not point out the predominant vegetation growth during the wet season. The seasonal vegetation growth depended on each species. Thegood soil fertility corresponded to the highest plant cover. Soil fertility presented no influence on the above-ground biomass of the collected species. The negative influence of camelid grazing on soil properties could not be assessed. However, overgrazing could affect some plant species. Therefore, protection is needed in order to preserve the biodiversity in the Andean mountain grasslands.     

Mushroom production as an alternative for rural development in a forested mountainous area

Wild mushrooms are recognized as important non-wood forest products in mountainous ecosystems, but their real potential for generating rural economies has not been fully evaluated due to the difficulties in obtaining reliable productivity data, minimizing their true potential as contributor to rural economies. Mushroom yield models based on large data series from Pinus forest ecosystems in the region of Catalonia(Spain), combined with data from the Spanish National Forest Inventory allow us to estimate the potential mushroom productivity by forest ecosystems. The results of 24,500 tons/yr of mushrooms of which 16,300 tons are classified as edible and 7,900 tons are commonly marketed demonstrate the importance of mushroom productions in Catalonian pine forests, mostly located in mountainous areas where the development of agricultural activities is limited. Economic mushroom value is estimated at 48 million € for the edible mushroom and 32 million € for those corresponding to marketable yields, confirming the potential of this non-wood forest product. These production results and corresponding economic values provide a basis for the incorporation of wild mushrooms as significant non-wood forest products in the development of forest policies in mountainous areas.     

Technical, financial and location criteria for the design of land application system treatment

Conventional water treatments when downsized to cover the demands of small and scattered populations are costly and ineffective. In fact, many small towns cannot afford the high average treatment costs nor provide the skill and complex management requirements. Even when these facilities are available, waste water might not be properly treated. Land application system treatments (LAST) have been shown to be preferable on the basis of their technical effectiveness and financial viability. The recently approved Spanish regulations (RDL 1620/2007, pp 50369–50661) represent an opportunity for the implementation of well-designed LASTs. This paper presents an assessment methodology for the design of LASTs by combining technical, financial and location criteria. The method is applied to the design of LASTs to cover the water disposal demand of twelve municipalities located within the protected natural landscape, and surrounding areas of ‘El Rebollar’, Salamanca, Spain.