Impacts of climate change on building energy demands in the intra-Americas region

It was recently reported a regional warming in the intra-Americas region where sea surface temperature exhibited increases exceeding 0.15 °C/decade and an accelerated air temperature rise that could impact building energy demands per capita (EDC). Reanalysis data is used herein to quantify the impacts of these warming trends on EDC. Results of the analysis depict a Southern Greater Antilles and inland South America with a positive annual EDC rate of 1–5 kWh per year. The Intergovernmental Panel on Climate Change (IPCC) Representative Concentration Pathways (RCP) 2.6 and 4.5 scenarios were selected to analyze energy demand changes in the twenty-first century. A multi-model ensemble forecasts an EDC increase of 9.6 and 23 kWh/month in the RCP2.6 and RCP4.5 at the end of the twenty-first century, which may increase average building cooling loads in the region by 7.57 GW (RCP2.6) and 8.15 GW (RCP4.5), respectively. Furthermore, 4 of 9 (RCP2.6) and 7 of 9 (RCP4.5) of the major countries in this region have EDCs ranging between 1887 and 2252 kWh/year at the end of this century. Therefore, increased energy production and improved energy infrastructure will be required to maintain ideal indoor building conditions at the end of the twenty-first century in these tropical coastal regions as consequence of a warmer climate.     

Flash flood in the mountainous region of Rio de Janeiro state (Brazil) in 2011: part I—calibration watershed through hydrological SMAP model

Natural Hazards - Flooding and water logging possess severe hazards to human population in many parts of the world. Mumbai, the study area, is one of the cities in India and has been frequently...     

Pseudo- and real-inverted metamorphism caused by the superposition and extrusion of a stack of nappes: a case study of the Southern Brasília Orogen,Brazil

International Journal of Earth Sciences - The Southern Brasília Orogen is a Neoproterozoic belt that occurs along the southernmost border of the São Francisco Craton where the...     

Soil contamination by metals with high ecological risk in urban and rural areas

Industrial development, intensive agriculture and fast urbanization have caused the metal contents of soils to increase to many times the allowable limits. To assess this impact on urban and rural soils, we quantified the Cd, Cr, Cu, Pb, Ni and Zn contents of 258 soil samples from the Recife metropolitan region (RMR). The objectives of the study were to estimate the probability of ecological risk, to determine the spatial pattern of the metals’ accumulation in the soil and to identify potential sources for the metals using a multivariate geostatistical approach. Mean concentrations of Zn, Cr, Pb, Cu, Ni and Cd in soils were 65.2, 17.9, 16.5, 12.8, 6.3 and 1.5 mg kg^?1, respectively. The results demonstrated that the Cd was anthropogenic in origin, the Cr and Ni were lithogenic (natural) in origin and the Cu, Pb and Zn were mixed in origin. Cd contaminated 91% of the samples; the median content of Cd (1.4 mg kg^?1) was three times the quality reference value for soil. The Cd contents of sugarcane fields exceeded the allowable limit (3.0 mg kg^?1) for agricultural areas. The spatial variability of the metals in the RMR showed that metallurgy, cement production, vehicle exhaust and vehicular traffic were the main sources of metals in urban areas, while phosphate-based fertilizers were the main sources in rural areas. More than 80% of the metropolitan region surveyed in the study was at moderate to high ecological risk.     

Sea surface temperature anomalies driven by oceanic local forcing in the Brazil-Malvinas Confluence

Sea surface temperature (SST) anomaly events in the Brazil-Malvinas Confluence (BMC) were investigated through wavelet analysis and numerical modeling. Wavelet analysis was applied to recognize the main spectral signals of SST anomaly events in the BMC and in the Drake Passage as a first attempt to link middle and high latitudes. The numerical modeling approach was used to clarify the local oceanic dynamics that drive these anomalies. Wavelet analysis pointed to the 8–12-year band as the most energetic band representing remote forcing between high to middle latitudes. Other frequencies observed in the BMC wavelet analysis indicate that part of its variability could also be forced by low-latitude events, such as El Niño. Numerical experiments carried out for the years of 1964 and 1992 (cold and warm El Niño-Southern Oscillation (ENSO) phases) revealed two distinct behaviors that produced negative and positive sea surface temperature anomalies on the BMC region. The first behavior is caused by northward cold flow, Río de la Plata runoff, and upwelling processes. The second behavior is driven by a southward excursion of the Brazil Current (BC) front, alterations in Río de la Plata discharge rates, and most likely by air-sea interactions. Both episodes are characterized by uncoupled behavior between the surface and deeper layers.     

Methods for estimating the velocities of the Brazil Current in the pre-salt reservoir area off southeast Brazil (23∘ S–26∘ S)

The Brazil Current (BC) is likely the least observed and investigated subtropical western boundary current in the world. This study proposes a simple and systematic methodology to estimate quasi-synoptic cross-sectional speeds of the BC within the Santos Basin (23^° S–26^° S) based on the dynamic method using several combinations of data: Conductivity, temperature, and depth (CTD), temperature profiles, CTD and vessel-mounted Acoustic Doppler Current Profiler (VMADCP), and temperature profiles and VMADCP. All of the geostrophic estimates agree well with lowered Acoustic Doppler Current Profiler (LADCP) velocity observations and yield volume transports of -5.56 ±1.31 and 2.50 ±1.01 Sv for the BC and the Intermediate Western Boundary Current (IWBC), respectively. The LADCP data revealed that the BC flows southwestward and is ～100 km wide, 500 m deep, and has a volume transport of approximately -5.75 ±1.53 Sv and a maximum speed of 0.59 m s^?1. Underneath the BC, the IWBC flows northeastward and has a vertical extent of approximately 1,300 m, a width of ～60 km, a maximum velocity of ～0.22 m s?¹, and a volume transport of 4.11 ± 2.01 Sv. Our analysis indicates that in the absence of the observed velocities, the isopycnal (σ ₀) of 26.82 kg m^?3 (～500 dbar) is an adequate level of no motion for use in geostrophic calculations. Additionally, a simple linear relationship between the temperature and the specific volume anomaly can be used for a reliable first estimate of the BC-IWBC system in temperature-only transects.     

Performance of masonry buildings during the Emilia 2012 earthquake

The earthquake sequence started on May \(20\) th 2012 in Emilia (Italy) affected a region where masonry constructions represent a large part of the existing building stock and the construction of new modern masonry buildings is a common practice. The paper is focused on the performance of common architectural configurations, typical for residential or business use. The large majority of old masonry buildings is made of fired clay bricks. The seismic performance of these buildings is particularly interesting since major past earthquakes in Italy affected areas with mainly stone masonry structures. Apart from examples showing systematic or peculiar structural deficiencies governing the vulnerability of several buildings, the overall seismic performance of these structures to repeated shaking, with PGA as large as 0.25–0.3 g was rather good, despite the major part of them were only conceived for carrying vertical loads. In fact, seismic design is mandatory in the area only since 2003. Modern low-rise masonry buildings erected after this date and incorporating seismic design and proper detailing resulted in most cases practically undamaged. The examples reported in the paper allow an evaluation of the superior performance of seismically designed modern masonry buildings in comparison to older ones.     

Investigating the molecular systematic relationships amongst selected Plesionika (Decapoda: Pandalidae) from the Northeast Atlantic and Mediterranean Sea

Despite the high number of species and ecological diversity of pandalid shrimps, there has been no previous attempt to resolve evolutionary relationships of several genera using molecular tools. Although mitochondrial DNA cytochrome oxidase I (COI) is widely used in barcoding studies to delimit species boundaries, additional insights into phylogenetic affinities can be obtained, especially when used in combination with data from additional genes. The knowledge of molecular diversity is essential to understand phylogenetic relationships and will help systematic clarifications. Based on partial fragments of the 16S and COI genes, we have focused specifically on addressing the systematic relationships of the economically and ecologically important shrimp genus Plesionika within a framework of five genera from within the Pandalidae. Our results showed that species within Plesionika are substantially divergent when compared with other genera, exhibiting the highest average nucleotide divergence, with 0.1123 and 0.0846 in COI and 16S genes, respectively. In addition, sequence divergence was found to vary greatly within the genus Plesionika (COI/16S): 0.0247/0.0016 between Plesionika antigai and Plesionika heterocarpus and 0.1616/0.098 between Plesionika heterocarpus and Plesionika edwardsii. We did not find amino acid sequence divergence between P. heterocarpus and P. antigai compared with P. heterocarpus and P. edwardsii (8.10%, K2P distance). Three species of Plesionika (P. antigai, P. heterocarpus and Plesionika scopifera) appear well separated from other Plesionika species in both maximum likelihood and Bayesian analyses. The present study confirms the utility of COI over 16S as a genetic marker to resolve relationships between different species of Plesionika from the Northeast Atlantic and Mediterranean Sea, in addition to species delimitation. The findings highlight the need to further review paraphyly within Plesionika in an attempt to recognize a concordance in the evolutionary history of Plesionika with major ecological and geological events.     

Ecological quality assessment of small estuaries from the Portuguese coast based on benthic macroinvertebrate assemblages indices

Benthic macroinvertebrates communities are the most consistently emphasized biotic component of aquatic ecosystems and are one of the biological indicators required for assessment by the European Water Framework Directive. In this context, several indices based on these communities have been developed in order to assess ecological quality of estuarine systems. In the present work we used AMBI, M-AMBI, BENTIX and BAT to distinguish ecological status of five small estuarine systems of the Portuguese south and southwest coasts. Although indices outputs did not differ between systems and sampling seasons, results indicated that the metrics in which these indices are based could differentiate community structures as a result of two main gradients that force these communities: the natural variability, and the anthropogenic impact.     

Analysis of the Characteristics of Low-Latitude GPS Amplitude Scintillation Measured During Solar Maximum Conditions and Implications for Receiver Performance

Ionospheric scintillations are fluctuations in the phase and/or amplitude of trans-ionospheric radio signals caused by electron density irregularities in the ionosphere. A better understanding of the scintillation pattern is important to make a better assessment of GPS receiver performance, for instance. Additionally, scintillation can be used as a tool for remote sensing of ionospheric irregularities. Therefore, the study of ionospheric scintillation has both scientific as well as technological implications. In the past few years, there has been a significant advance in the methods for analysis of scintillation and in our understanding of the impact of scintillation on GPS receiver performance. In this work, we revisit some of the existing methods of analysis of scintillation, propose an alternative approach, and apply these techniques in a comprehensive study of the characteristics of amplitude scintillation. This comprehensive study made use of 32?days of high-rate (50?Hz) measurements made by a GPS-based scintillation monitor located in S?o José dos Campos, Brazil (23.2°S, 45.9°W, ?17.5° dip latitude) near the Equatorial Anomaly during high solar flux conditions. The variability of the decorrelation time (τ₀) of scintillation patterns is presented as a function of scintillation severity index (S ₄). We found that the values of τ₀ tend to decrease with the increase of S ₄, confirming the results of previous studies. In addition, we found that, at least for the measurements made during this campaign, averaged values of τ₀ (for fixed S ₄ index values) did not vary much as a function of local time. Our results also indicate a significant impact of τ₀ in the GPS carrier loop performance for S ₄?≥?0.7. An alternative way to compute the probability of cycle slip that takes into account the fading duration time is also presented. The results of this approach show a 38% probability of cycle slips during strong scintillation scenarios (S ₄ close to 1 and τ₀ near 0.2?s). Finally, we present results of an analysis of the individual amplitude fades observed in our set of measurements. This analysis suggests that users operating GPS receivers with C/N ₀ thresholds around 30?dB-Hz and above can be affected significantly by low-latitude scintillation.