Metasomatism and melting history of a Variscan lithospheric mantle domain: evidence from the Puy Beaunit xenoliths (French Massif Central)

Mantle xenoliths from Puy Beaunit (French Massif Central) are compositionally varied, ranging from relatively fertile spinel lherzolites to refractory spinel dunites. Fertile peridotites have registered a modal (amphibole-bearing lherzolites) and cryptic metasomatic event that took place before the last Permian (257 Ma) melting episode. Depletion processes have been constrained by chemical modelling: the depletion is related to different degrees of partial melting, but two major melt extraction episodes are needed to explain the range of major element composition. The second event was responsible for the local large-scale dunitification of former residues. The first melting event (F25%) and metasomatic enrichment are attributed to an ancient fluid and/or liquid infiltration that could be related to a pre-Variscan regional subduction (located to the north of the Beaunit area). Texture acquisition and major deformation of the mantle xenoliths were sub-contemporaneous of the subduction and would result from lithospheric delamination. The second melting event (F17%) produced high-Mg basalts with calc-alkaline trace element signature that gave rise to the Permian underplating episode recognised in western Europe.     

Geological and SHRIMP II U-Pb constraints on the age and origin of the Breves Cu-Au-(W-Bi-Sn) deposit,Carajás,Brazil

The Breves deposit in the Carajás Copper-Gold Belt, Brazil, a member of the Cu-Au-(W-Bi-Sn) group of deposits, contains about 50 Mt of 1.22% Cu, 0.75 g/t Au, 2.4 g/t Ag, 1,200 g/t W, 70 g/t Sn, 175 g/t Mo and 75 g/t Bi. It is hosted by sandstones and siltstones of the Águas Claras Formation (minimum age of 2,681±5 Ma) in the roof zone of a complex, highly altered granite intrusion. The mineralisation is disseminated in a greisenized zone, resulting from alteration of probable monzogranites and syenogranites. The ore-bearing greisen contains abundant xenomorphic quartz in association with Fe-chlorite and muscovite. The gangue assemblage also includes fluorite, tourmaline, and minor amounts of monazite, xenotime, chlorapatite, thorite, zircon, calcite, siderite and bastnäesite. Copper mineralisation is dominated by chalcopyrite associated with pyrite, arsenopyrite, pyrrhotite and molybdenite. Gold particles, in equilibrium with native bismuth, are common as inclusions in chalcopyrite. The greisen contains sub-economic concentrations of tungsten and niobium that are related to the presence of ferberite, qitianlingite and Nb-rutile. SHRIMP II zircon dating of the host granites gives ²⁰⁷Pb/²⁰⁶Pb ages of 1,878±8 and 1,880±9 Ma for two phases, and a combined age of 1,879±6 Ma. SHRIMP II dating of monazite and xenotime grains in late- to post-mineralisation veins gives a combined ²⁰⁷Pb/²⁰⁶Pb age of 1,872±7 Ma, indistinguishable from the ages of the granites. This provides a genetic connection between the Breves deposit and the ca. 1.88 Ga A-type granite magmatism that typifies the Carajás Belt as part of a much larger, intracratonic magmatic province that extends over much of the Amazonian Craton. The recognition of this association has exploration implications, not only for the geophysical signature of the granite roof zones, but also for likely geochemical dispersion around the deposits of this type.Editorial handling: G. Beaudoin     

Noril’sk–Talnakh Cu–Ni–PGE deposits: a revised tectonic model

The Norilsk mining district is located at the northwest margin of the Tunguska basin, in the centre of the 3,000×4,000 km Siberian continental flood basalt (CFB) province. This CFB province was formed at the Permo-Triassic boundary from a superplume that ascended into the geometric centre of the Laurasian continent, which was surrounded by subducting slabs of oceanic crust. We suggest that these slabs could have reached the core–mantle boundary, and they may have controlled the geometric focus of the superplume. The resulting voluminous magma intruded and erupted in continental rifts and related extensive flood basalt events over a 2–4 Ma period. Cu–Ni–PGE sulfide mineralization is found in olivine-bearing differentiated mafic intrusions beneath the flood basalts at the northwestern margin of the Siberian craton and also in the Taimyr Peninsula, some 300 km east of a triple junction of continental rifts, now buried beneath the Mesozoic–Cenozoic sedimentary basin of western Siberia. The Norilsk-I and Talnakh-Oktyabrsky deposits occur in the Norilsk–Kharaelakh trough of the Tunguska CFB basin. The Cu–Ni–PGE-bearing mineralized intrusions are 2–3 km-wide and 20 km-long differentiated chonoliths. Previous studies suggested that parts of the magma remained in intermediate-level crustal chambers where sulfide saturation and accumulation took place before emplacement. The 5–7-km-thick Neoproterozoic to Palaeozoic country rocks, containing sedimentary Cu mineralization and evaporites, may have contributed additional metal and sulfur to this magma. Classic tectonomagmatic models for these deposits proposed that subvertical crustal faults, such as the northeast-trending Norilsk–Kharaelakh fault, were major trough-parallel conduits providing access for magmas to the final chambers. However, geological maps of the Norilsk region show that the Norilsk–Kharaelakh fault offsets the mineralization, which was deformed into folds and offset by related reverse faults, indicating compressional deformation after mineralization in the Late Triassic to Early Jurassic. In addition, most of the intrusions are sills, not dykes as should be expected if the vertical faults were major conduits. A revised tectonic model for the Norilsk region takes into account the fold structure and sill morphology of the dominant intrusions, indicating a lateral rather than vertical emplacement direction for the magma into final chambers. Taking into account the fold structure of the country rocks, the present distribution of the differentiated intrusions hosting the Norilsk-I and Talnakh–Oktyabrsky deposits may represent the remnants of a single, >60 km long, deformed and eroded palm-shaped cluster of mineralized intrusions, which are perceived as separate intrusions at the present erosional level. The original direction of sill emplacement may have been controlled by a northeast-trending paleo-rise, which we suggest is present at the southeastern border of the Norilsk–Kharaelakh trough based on analysis of the unconformity at the base of the CFB. The mineralized intrusions extend along this rise, which we interpret as a structure that formed above the extensionally tilted block in the metamorphic basement. Geophysical data indicate the presence of an intermediate magma chamber that could be linked with the Talnakh intrusion. In turn, this T-shaped flat chamber may link with the Yenisei–Khatanga rift along the northwest-trending Pyasina transform fault, which may have served as the principal magma conduit to the intermediate chamber. It then produced the differentiated mineralized intrusions that melted through the evaporites with in situ precipitation of massive, disseminated, and copper sulfide ore. The Norilsk–Kharaelakh crustal fault may not relate to mineralization and possibly formed in response to late Mesozoic spreading in the Arctic Ocean.Editorial handling: P. Lightfoot     

Petrology and structure of the Palaeoproterozoic (1.9 Ga) Rytky nickel sulphide deposit,Central Finland: a comparison with the Kotalahti nickel deposit

The Palaeoproterozoic (1.9 Ga) Rytky and Kotalahti mafic-ultramafic intrusions are located in the contact zone between the Archaean craton and Proterozoic supracrustal rocks. During the second deformation event (D₂) the surrounding country rocks were subjected to intensive metamorphism and deformation associated with the Svecofennian orogeny; the Archaean/Proterozoic boundary controlled both D₂ thrusting and magma ascent. Emplacement of the Rytky and Kotalahti intrusions took place at the culmination of D₂, as shown by the gneiss inclusions with S₂ schistosity within the intrusions. Overthrusting continued after emplacement, with detached fragments of the bodies incorporated into the Archaean gneisses. During the third deformation event (D₃) the originally subhorizontal intrusions were rotated into a subvertical position, so that they now have their stratigraphic top towards the west. The Rytky intrusion is composed mainly of medium- and coarse-grained lherzolite, websterite and gabbronorite. The nickel deposit with pentlandite as the main nickel mineral is associated with the lherzolite and websterite. The coarse-grained lherzolite, websterite and melagabbro represent the first rocks to form, and they contain the nickel sulphide mineralisation. Country rock contamination, as indicated by high TiO₂, P₂O₅, Rb, Zr and light rare earth element contents (LREE), is most pronounced in the marginal part of the intrusion, which was the first to form. The variation in olivine composition (Fo 78.6-84.77 mole %; Ni 630–2386 ppm) and the metal ratio of the sulphide (Ni/Co 19.3 – 50.3) along with the internal stratigraphy of the intrusion indicate an in-situ process of sulphide ore formation.Editorial handling: P. LightfootAn erratum to this article can be found at     

Hydrothermal mixing,carbonate dissolution and sulfide precipitation in Mississippi Valley-type deposits

A large number of Mississippi Valley-Type (MVT) deposits are located within dissolution zones in carbonate host rocks. Some genetic models propose the existence of cavities generated by an earlier event such as a shallow karstification, that were subsequently filled with hydrothermal minerals. Alternative models propose carbonate dissolution caused by the simultaneous precipitation of sulfides. These models fail to explain either the deep geological setting of the cavities, or the observational features which suggest that the dissolution of carbonates and the precipitation of minerals filling the cavities are not strictly coeval. We present a genetic model inspired by the textural characteristics of MVT deposits that accounts for both the dissolution of carbonate and precipitation of sulfides and later carbonates in variable volumes. The model is based on the mixing of two hydrothermal fluids with a different chemistry. Depending on the proportion of the end members, the mixture dissolves and precipitates carbonates even though the two mixing solutions are both independently saturated in carbonates. We perform reactive transport simulations of mixing of a regional groundwater and brine ascending through a fracture, both saturated in calcite, but with different overall chemistries (Ca and carbonate concentrations, pH, etc). As a result of the intrinsic effects of chemical mixing, a carbonate dissolution zone, which is enhanced by acid brines, appears above the fracture, and another zone of calcite precipitation builds up between the cavity and the surrounding rock. Sulfide forms near the fracture and occupies a volume smaller than the cavity. A decline of the fluid flux in the fracture would cause the precipitation of calcite within the previously formed cavities. Therefore, dissolution of carbonate host rock, sulfide precipitation within the forming cavity, and later filling by carbonates may be part of the same overall process of mixing of fluids in the carbonate host rock.Editorial handling: C. Everett     

Geology and geochemistry of the Changba SEDEX Pb-Zn deposit,Qinling orogenic belt,China

The Changba Pb-Zn SEDEX deposit occurs in the Middle Devonian sequence of the Anjiaca Formation of the Western Qinling Hercynian Orogen in the Gansu Province, China. The Changba-II orebody is hosted in biotite quartz schist and is the largest of 143 stratiform orebodies that are hosted either in biotite quartz schist or marble. The Changba-II comprises two types of mineralization: a bedded facies and an underlying breccia lens. The bedded section exhibits three sulfide sub-facies zoned from bottom to top: 1) banded sphalerite intercalated with quartz albitite; 2) interbedded massive pyrite and sphalerite ore; and 3) banded sphalerite ore intercalated with banded baritite. Major metallic minerals are sphalerite, pyrite, galena, with minor arsenopyrite, pyrrhotite, boulangerite, and rare chalcopyrite. The bedded sulfides are underlain by a lens of brecciated and albitized biotite-quartz schists cemented by sulfides and tourmaline.Massive and bedded sulfide ³⁴S values range from 8.1 to 29.3, whereas barite ³⁴S values range from 20.8 to 31.5. Disseminated pyrite in footwall schists has ³⁴S values ranging from 8.1 to 10.6, and increase to values ranging from 11.1 to 14.7 in the hangingwall. The lower ³⁴S values for massive and bedded sulfides are interpreted to be derived from progressive bacterial sulfate reduction (BSR) of Devonian seawater in a sulfate-restricted sub-basin. The higher ³⁴S values for massive and bedded sulfides could be a product of quantitative BSR but this is incompatible with barite being more abundant above the bedded sulfides. Instead, it is more likely that thermochemical sulfate reduction of seawater sulfate or of evaporite was the source of heavy hydrothermal sulfur. Heavy hydrothermal sulfur was injected into a sulfate-restricted sub-basin where it mixed with low ³⁴S BSR sulfide to form the massive and bedded sulfides. The REE patterns of sulfide layers and associated quartz albitite and baritite are similar to those of the host biotite quartz schists, suggesting that the hydrothermal fluids leached REE from the underlying rocks. Pb isotope ratios in galena form an array between the Upper Crust and the Mantle reservoir curves, which indicates that the lead is derived from upper crustal rocks comprising mafic igneous units. The Sr⁸⁷/Sr⁸⁶ ratio of 0.7101 for carbonate within the sulfide layers also suggests that Sr is derived from the mixing of Sr leached from upper crustal rocks with Middle Devonian seawater Sr. A Rb-Sr isochron age of 389.4 ± 6.4 Ma for sulfide layers and the interbedded hydrothermal sediments is consistent with the age of host Mid-Devonian strata. Ar³⁹/Ar⁴⁰ plateau age at 352.8 ± 3.5 Ma and Ar³⁹-Ar⁴⁰ isochron age of 346.6 ± 6.4 Ma for albite in the quartz albitite intercalated with sulfide layers indicate either albite formation after the sulfides or thermal resetting of the Rb-Sr system at about 350 Ma, the age of collision between the North China and Yangtze cratons.Editorial handling: E. Frimmel     

Nd-Sr-Pb isotopic constraints on metal and fluid sources in W-Sb-Au mineralization at Woxi and Liaojiaping (Western Hunan,China)

This paper presents Nd-Sr-Pb isotope data on scheelite, inclusion fluids and residues of gangue quartz, and sulfides from the W-Sb-Au ore deposits at Woxi and Liaojiaping (LJP) in the Xuefeng Uplift Belt (XUB), Western Hunan, China. Sm and Nd concentrations in scheelite from Woxi are much lower than in scheelite from LJP and can be distinguished by their high ¹⁴⁷Sm/¹⁴⁴Nd ratios of ~1.25 from the much lower ratios around 0.26 in scheelites from the LJP. Nd values (compared to values at 200 Ma, which is the average timing of granitoid emplacement during the Indosinian-Yanshanian periods in the XUB) are around –10 for the LJP and compare well with the range of –5 to –11 defined by the granitoids, whereas they are around –27 for scheelite from Woxi. This might indicate that REEs in the mineralizing fluids at LJP originated from granitoids that are concentrated along the southern border of the XUB, whereas in the case of Woxi, the original fluids might have been masked by REEs released during intense high-temperature wall rock alteration of unexposed Precambrian basement rocks at depth. Sr isotopes of scheelite from these two deposits show similar relations to host / nearby rocks, in that ⁸⁷Sr/⁸⁶Sr (T=200 Ma) ratios of ~0.721 for LJP scheelite agree with values ranging between 0.718 – 0.726 for granitoids, whereas these ratios are much higher (i.e. 0.745) for scheelite from Woxi and correspond to the ⁸⁷Sr/⁸⁶Sr (T=200 Ma) ratio range of 0.743 – 0.749 for Precambrian host slates. Crushing experiments to release inclusion fluids from gangue quartz and sulfides deposited during later stages of ore deposition in both deposits failed to provide accurate and geologically meaningful two-point (fluid-residue) tie lines in Rb-Sr isochron diagrams. However, Sr released from fluid inclusions generally reveals lower initial ⁸⁷Sr/⁸⁶Sr ratios than the respective residues and shows affinities to ⁸⁷Sr/⁸⁶Sr (T=200 Ma) values of Indosinian-Yanshanian granitoids, both at Woxi and LJP. Pb stepwise leaching of scheelite and sulfides did not result in sufficient spreads in Pb isotope diagrams and therefore no information regarding exact mineralization ages in the two deposits could be deduced. Overall, ore Pb isotopes reveal upper crustal signatures and are compatible with Pb isotope signatures of the predominant Precambrian slates in the Woxi area. Steep trajectories through late stage quartz-sulfide mineralization in Pb isotope diagrams may hint at mixing scenarios involving Pb from the host rocks and a component with lower ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios relative to ²⁰⁶Pb/²⁰⁴Pb ratios, which cannot be linked to any known reservoir in the XUB mining district. Sr isotopes of four out of seven residual sulfide samples from Woxi plot along a paleomixing line at an age of 199 ± 8 Ma, supporting a mixing scenario for the fluids indicated by the Pb isotopes and pointing to a possible genetic relationship with the emplacement of Indosinian—Yanshanian granitoids. The budgets of REEs, Rb-Sr and Pb in the original fluids were severely affected by contamination of these elements apparently during intense wall rock alteration but, after sealing of the major pathways, the mineralizing fluids tend to have better preserved their original signatures. These attest a genetic relationship between the metallogeny in the XUB W-Sb-Au province and the emplacement of Indosinian-Yanshanian granitoids during Mesozoic intracontinental tectonic uplift and thrusting.Electronic Supplementary Material Supplementary material is available in the online version of this article at Editorial handling: B. Lehmann     

Fluid inclusion studies of the Abawso gold prospect,near the Ashanti Belt,Ghana

The major Ghanaian lode gold deposits are preferentially aligned along the western and eastern contacts of the Kumasi Basin with the Ashanti and Sefwi Belts, respectively. The investigated area of the Abawso small-scale concession, covering the workings of the old Ettadom mine, is situated 3 km west of the lithological contact of the Birimian metavolcanic rocks of the Akropong Belt in the east with the Birimian metasedimentary rocks of the Kumasi Basin in the west. The rocks of the Abawso concession represent a steeply NW-dipping limb of a SE-verging anticline with an axis plunging to the SW. Quartz veining occurs predominantly in the form of en échelon dilatational veins along NNE–SSW-striking shear zones of a few metres width and shows evidence of brittle and ductile deformation. Also stockwork-style quartz veining occurs in the vicinity of the main shaft of the old Ettadom mine. Hydrothermal alteration includes sericitisation, sulphidation and locally carbonatisation. The auriferous quartz veins mainly follow the trend of brittle to ductile deformed quartz veins; however, some occur in stockwork. Fluid inclusion studies reveal a large number of H₂O inclusions along intragranular trails in auriferous quartz vein samples, as well as an overall dominance of H₂O and H₂O-CO₂ inclusions over CO₂ inclusions. Textural observations and physico-chemical fluid inclusion properties indicate post-entrapment modifications for all quartz vein samples due to grain boundary migration recrystallisation. This process is interpreted to be responsible for the generation of the CO₂ inclusions from a H₂O-CO₂ parent fluid. In comparison with mineralisation at the Ashanti and Prestea deposits, which are characterised by CO₂±N₂ inclusions, the observed inclusion assemblage may be due to a shallower crustal level of mineralisation, or different degrees and styles of recrystallisation, or a less pronounced development of laminated quartz veins due to comparably restricted pressure fluctuations. Furthermore, the microthermometric observations allow the reconstruction of a possible retrograde P-T path, depicting near-isothermal decompression in the P-T range of the brittle/ductile transition.Editorial handling: E. Frimmel