定水头注水引起的含水层水平运动和应变

基于含水层固体颗粒与孔隙水不可压缩的假设 ,本文导出了单井注水情况下泰斯承压含水层水平运动速度与水头之间的基本关系式。然后利用注水井壁处的应力、应变边界条件 ,进一步导出了单井定水头注水引起的泰斯承压含水层水平运动速度、位移和应变解析表达式。该水平位移与应变由两部分组成 :一部分为由注水压力本身引起的经典弹性力学解项 ,它仅随半径而变化 ,与注水时间无关 ;另一部分为由地下水头变化引起的水动力学位移和应变解项。其中 ,含水层水动力学水平位移随时间加长呈指数增长特征 ,水动力学径向应变则表现为近井处拉张、远井处挤压的分区特征 ,且近井拉张区随时间加长逐渐向外扩展。单井注水含水层水动力学水平位移、应变解的导出 ,完善和发展了单孔内压经典弹性平面力学问题解     

青海省沙柳河南区有色金属矿成矿物质来源及矿床成矿模式探讨

本文简述了沙柳河南区有色金属矿床的基本特征。通过对成矿热液及成矿物质的来源与性质的研究,认为该矿床的成因类型为火山沉积—接触交代改造叠加型,进而探讨了该矿床的成矿模式。     

Vertical stress distribution due to an arbitrarily shaped foundation using triangulation and an analytical expression for a triangular loaded region

Using the basic Boussinesq's equation, the expression for the vertical stress distribution (σ_z) underneath any point on the ground surface due to a general triangular loaded region in a preferred orientation with a linearly varied loading has been successfully derived. When the triangle is not in a preferred orientation, a simple axis transformation is required and the expression will be equally applicable. Based on this expression, σ_z due to an arbitrarily shaped loaded foundation can simply be determined by first triangulating the loaded area and summing up the contributions from each generated triangular region. The procedures for triangulating and calculating the stress distribution can be simply automated through computer programs.     

THE CHARACTERISTIC OF MARINE ENVIRONMENT IN LINGDINGYANG ESTUARY

1 HYDROLOGIC FEATURES Lingdingyang Estuary, located at the middle south of Guangdong Province, is a bell-shaped estuary with a north-south direction. Its area is about 2100km2. The north of Qi′ao Island and Inner-Lingding Island, and the south of Humen are grouped as Neilingdingyang Estuary, having an area of 1041km2. Affected by topography, runoff and tide, its dynamic condition is very complicated. Different water areas have different hydrologic features. The topography under …     

On the Line Formation in Stellar Magnetized Atmospheres

1 INTRODUCTIONIn the previous paper (on et al. 1999, hereafter Paper I), we investigated the wavelength-dependence of four colltribution functions (CFs) derived from dmerent formal solutions andreferring to different emergellt quantities in the unpolarized case. Because one cannot generallyassign a single formation region to the whole line band in a real stellar atmosphere, e.g., the solaratmosphere, instead, the line formation region can be defined as the layers deviating farthestfrom t…     

富氏谱分析法模拟地壳垂直运动的地学依据及其策应力模型

应用地壳波浪与镶嵌构造学说对富氏谱分析法提取地壳垂直形变信息的科学性做了地质学意义上的阐释 ,并提出了根据多期形变资料提取特定波段上构造策应力的数学模型     

A Simulating Experiment in the Process of Soil Erosion on Bare Land in Mt. Tanakami

In order to understand the process of surface erosion and acquire basic data of conditions on hillslope without vege tation, a sprinkling experiment is conducted on a bare slope in Mt. Tanakami in the central part of Japan. Based on the mea surements of runoff, mean soil erosion depth, and sediment yield, etc. , the results suggest the following characteristics in the process of surface erosion in the experimental area. (1) The occurrence of sediment discharge is interrupted; (2) Surface runoff is a saturated overland flow; (3) The mean soil erosion depth is thick compared with other areas in Mt. Tanakami;(4) Sediment discharge process is detachment- limited.     

图形软件在编辑出版专题地图中的应用研究

计算机制图(CAC)和电子出版系统的普及和推广,从根本上改变了传统的地图生产工艺。本文结合制图实践,讨论了应用Coreldraw图形软件编辑出版专题地图的适应性、系统条件和工艺流程,并总结了一些制图经验和应该注意的若干问题。     

山东省区域地质构造演化探讨

山东省区域地质构造演化分为5个阶段.①陆核形成阶段形成太古宙高级区,地壳分异成稳定的花岗岩穹窿和活动的绿岩带,第一次克拉通化完成.②陆块发生形成阶段地壳向刚性发展,在华北陆核硅铝壳的基础上先后有3次张开、闭合裂谷作用,第二次克拉通化完成.这一阶段演化在鲁西地区主要表现为挤压作用,形成大量造山花岗岩;鲁东地区则以拉张作用为主,形成海槽,产生沉积.③秦昆洋形成演化阶段四堡期沿鲁东南部地壳拉张,在华北板块与扬子板块间形成秦昆洋.晋宁期秦昆洋关闭,华北板块与扬子板块对接碰撞,沿胶南造山带产生大量同碰撞花岗岩,同时产生超高压变质作用及形成丰富多彩的碰撞构造.晋宁运动最终形成统一的原始中国古陆,第三次克拉通化完成.④陆块发展阶段鲁西地区地壳频繁升降,形成广泛的海相及海陆交互相沉积;鲁东地区则以造山抬升为主,地层沉积较少.⑤滨太平洋发展阶段该阶段的主要特征是断块构造发育,形成盆岭构造格局,产生大陆边缘花岗岩,构造体系由古亚洲构造域转向滨太平洋构造域.     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.