Larval development ofEuphausia similis (Crustacea,Euphausiacea) in Sagami Bay,central Japan

The larvae ofEuphausia similis G. O. Sars in Sagami Bay, Central Japan, are described. Nauplius, metanauplius, calyptopis and furcilia stages are included. In the furcilia stage, six forms are identified on the basis of the form of the pleopods and the number of terminal telson spines. Furcilia I: a pair of non-setose pleopods and seven terminal telson spines. Furcilia II: a pair of setose and three pairs of non-setose pleopods and seven terminal spines. Furcilia III: four pairs of setose and a pair of non-setose pleopods and seven terminal spines. Furcilia IV: five pairs of setose pleopods and five terminal telson spines. Furcilia V: five pairs of setose pleopods and three terminal telson spines. Furcilia VI: five pairs of setose pleopods and one terminal telson spine. On the basis of the developmental pathway of the larvae,E. similis is suggested to be related toE. spinifera, E. longirostris, E. hanseni and theE. gibboides group species. The size ofE. similis larvae, expressed as total length, in Sagami Bay varied according to month. The sizes of calyptopis III and furcilia I–V stages were smallest in November and March and largest in May.     

The Trobriand Subduction System in the Western Solomon Sea

A south-dipping Subduction system which underlies the Trobriand Trough and 149° Embayment, on the southern margin of the Solomon Sea, is active or was recently active. Oceanic basement is overlain by 2.5 s, two-way travel time (TWTT), of sediment that shows at least two stages of deformation: early thrusts (inner wall) and normal faults (outer wall), and later normal faults that have elevated the outer trench margin. Thrust anticlines and slope basins are developed on the inner wall. The floor of the Solomon Sea Basin arches upward between the Trobriand Trough and the New Britain Trench to form isolated peaks and ridges in the east (152° Peaks) and an east-west Central Ridge in the west. Structures in the subduction system, and in the Solomon Sea Basin, plunge westward towards the point of collision with the New Britain Trench.     

Some aspects of the biology of the micronektonic fishCyclothone pallida andC. acclinidens (Pisces: Gonostomatidae) in Sagami Bay,Central Japan

Some aspects of the biology of the micronektonic fishesCyclothone pallida andC. acclinidens are described on the basis of samples taken during a series of 20 cruises from December 1982 to November 1985 at a fixed station near the center of Sagami Bay, Central Japan.C. pallida is a regular component of theCyclothone population in Sagami Bay, being found in more than 90% of the samples. On the other hand,C. acclinidens was encountered sporadically, being found in less than 25% of the samples. The depth range ofC. pallida is estimated to be about 400–1,000 m. It spawns mainly during the spring and summer in Sagami Bay.C. pallida releases about 1,000–3,000 eggs and may spawn several times during its life span. On the average, it reaches 18.5 mm standard length (SL) in one year, 24 mm SL in two years and 29.5 mm SL in three years during its subadult stage. Extrapolation of the growth curve suggests that males and females attain first sexual maturity in three to four years at 30–35 mm and five to six years at 40–45 mm SL, respectively.Cyclothone pallida is concluded to have a regular life cycle in Sagami Bay. It remains uncertain whether or notC. acclinidens reproduces in this area.     

Sea surface temperature observation by Global Imager (GLI)/ADEOS-II: Algorithm and accuracy of the product

A sea surface temperature (SST) retrieval algorithm for Global Imager (GLI) aboard the ADEOS-II satellite has been developed. The algorithm is used to produce the standard SST product in the Japan Aerospace Exploration Agency (JAXA). The algorithm for cloud screening is formed by combinations of various types of tests to detect cloud-contaminated pixels. The combination is changed according to the solar zenith angle, which enables us to detect clouds even in the sun glitter region in daytime. The parameters in the cloud-detection tests have been tuned using the GLI global observations. SST is calculated by the Multi-Channel SST (MCSST) technique from the detected clear pixels. Using drifting buoy measurements, match-up data are produced to derive the coefficients of the MCSST equations and to examine their performance. The bias and RMSE of the GLI SST are 0.03 K and 0.66 K for daytime and, −0.01 K and 0.70 K for nighttime, respectively.     

The Hard X-ray Telescope (HXT) for the SOLAR-A mission

The Hard X-ray Telescope (HXT) is a Fourier-synthesis imager; a set of spatially-modulated photon count data are taken from 64 independent subcollimators and are Fourier-transformed into an image by using procedures such as the maximum entropy method (MEM) or CLEAN. The HXT takes images of solar flares simultaneously in four energy bands, nominally 15 (or 19)–24, 24–35, 35–57, and 57–100 keV, with an ultimate angular resolution as fine as 5 arc sec and a time resolution 0.5 s. Each subcollimator has a field of view wider than the solar disk. The total effective area of the collimator/detector system reaches 70 cm², about one order of magnitude larger than that of the HINOTORI hard X-ray imager. Thanks to these improvements, HXT will for the first time enable us to take images of flares at photon energies above 30 keV. These higher-energy images will be compared with lower-energy ones, giving clues to the understanding of nonthermal processes in solar flares, i.e., the acceleration and confinement of energetic electrons. It is of particular importance to specify the acceleration site with regard to the magnetic field figuration in a flaring region, which will be achieved by collaborative observations between HXT and the Soft X-ray Telescope on board the same mission.After the launch the name of SOLAR-A has been changed to YOHKOH.     

Dating pseudotachylyte of the Asuke Shear Zone using zircon fission-track and U–Pb methods

Zircon fission-track (FT) and U–Pb analyses were performed on zircon extracted from a pseudotachylyte zone and surrounding rocks of the Asuke Shear Zone (ASZ), Aichi Prefecture, Japan. The U–Pb ages of all four samples are  67–76 Ma, which is interpreted as the formation age of Ryoke granitic rocks along the ASZ. The mean zircon FT age of host rock is 73 ± 7 (2σ) Ma, suggesting a time of initial cooling through the zircon closure temperature. The pseudotachylyte zone however, yielded a zircon FT age of 53 ± 9 (2σ) Ma, statistically different from the age of the host rock. Zircon FTs showed reduced mean lengths and intermediate ages for samples adjacent to the pseudotachylyte zone. Coupled with the new zircon U–Pb ages and previous heat conduction modeling, the present FT data are best interpreted as reflecting paleothermal effects of the frictional heating of the fault. The age for the pseudotachylyte coincides with the change in direction of rotation of the Pacific plate from NW to N which can be considered to initialize the NNE–SSW trending sinistral–extensional ASZ before the Miocene clockwise rotation of SW Japan. The present study demonstrates that a history of fault motions in seismically active regions can be reconstructed by dating pseudotachylytes using zircon FT thermochronology.     

Determination of the oxidation state of radiogenic Pb in natural zircon using X-ray absorption near-edge structure

We examined the L_III-edge Pb X-ray absorption near-edge structure (XANES) of three natural zircon samples with different amounts of radiation doses (1.9 × 10¹⁵ to 6.8 × 10¹⁵ α-decay events/mg). The results suggest that the oxidation state of radiogenic Pb in the zircon sample with the highest radiation dose is divalent. The XANES spectra of the two other samples with lower radiation doses suggest that radiogenic Pb(II) is present, and further that some Pb may be tetravalent. This is the first work on the determination of the oxidation state of radiogenic Pb in natural zircon using XANES.     

The relation between Cu/Au ratio and formation depth of porphyry-style Cu–Au ± Mo deposits

Constraints on gold and copper ore grades in porphyry-style Cu–Au ± Mo deposits are re-examined, with particular emphasis on published fluid pressure and formation depth as indicated by fluid inclusion data and geological reconstruction. Defining an arbitrary subdivision at a molar Cu/Au ratio of 4.0 × 10⁴, copper–gold deposits have a shallower average depth of formation (2.1 km) compared with the average depth of copper–molybdenum deposits (3.7 km), based on assumed lithostatic fluid pressure from microthermometry. The correlation of Cu/Au ratio with depth is primarily influenced by the variations of total Au grade. Despite local mineralogical controls within some ore deposits, the overall Cu/Au ratio of the deposits does not show a significant correlation with the predominant type of Cu–Fe sulfide, i.e., chalcopyrite or bornite. Primary magma source probably contributes to metal endowment on the province scale and in some individual deposits, but does not explain the broad correlation of metal ratios with the pressure of ore formation. By comparison with published experimental and fluid analytical data, the observed correlation of the Cu/Au ratio with fluid pressure can be explained by dominant transport of Cu and Au in a buoyant S-rich vapor, coexisting with minor brine in two-phase magmatic hydrothermal systems. At relatively shallow depth (approximately <3 km), the solubility of both metals decreases rapidly with decreasing density of the ascending vapor plume, forcing both Cu and Au to be coprecipitated. In contrast, magmatic vapor cooling at deeper levels (approximately >3 km) and greater confining pressure is likely to precipitate copper ± molybdenum only, while sulfur-complexed gold remains dissolved in the relatively dense vapor. Upon cooling, this vapor may ultimately contract to a low-salinity epithermal liquid, which can contribute to the formation of epithermal gold deposits several kilometers above the Au-poor porphyry Cu–(Mo) deposit. These findings and interpretations imply that petrographic inspection of fluid inclusion density may be used as an exploration indicator. Low-pressure brine + vapor systems are favorable for coprecipitation of both metals, leading to Au-rich porphyry–copper–gold deposits. Epithermal gold deposits may be associated with such shallow systems, but are likely to derive their ore-forming components from a deeper source, which may include a deeply hidden porphyry–copper ± molybdenum deposit. Exposed high-pressure brine + vapor systems, or stockwork veins containing a single type of intermediate-density inclusions, are more likely to be prospective for porphyry–copper ± molybdenum deposits.     

The effect of microorganisms on Fe precipitation rates at neutral pH

The effect of microorganisms on Fe precipitation rates at neutral pH in the field was examined. The studied area was a cave having Fe-stalactites composed mainly of ferrihydrite and associated microorganisms. The microorganisms were covered with ferrihydrite. Water associated with stalactites was slightly supersaturated with respect to ferrihydrite, and had a dissolved oxygen concentration of 2 ppm, a pH of 6, and an Fe concentration of approximately 14 ppm. Fe precipitation rates were estimated from decreases in Fe concentrations in water during flowing through the Fe-stalactites. The estimated Fe precipitation rate in the field ranges from 6.8×10⁻⁸ to 4.0×10⁻⁷ mol/l/s. These values are in good agreement with bulk estimates of Fe-stalactite growth rates derived from the length increase (1.3 cm) of one formation over 30 days. The estimated Fe precipitation rates are faster by about four orders of magnitude than expected inorganic precipitation rates. On-site Fe precipitation experiments with sterilized and unsterilized Fe-stalactites and without Fe-stalactites indicate that microorganisms are the controlling factor accelerating Fe precipitation rates at neutral pH. These results suggest that microbially accelerated Fe precipitation rates are more likely related to exopolysaccharides and microbial surface properties than metabolic precipitation mechanisms.