Vertical distribution of particulate manganese and iron in the Beppu Bay

Around the thermocline, difference in the depth of the maximum concentration between particulate manganese and iron was observed above the basin located at the south-western corner of the Beppu Bay, along with the remarkable difference in pH and Eh.     

Mass balance of heavy metals in the seto inland sea, Japan

To discuss the geochemical and environmental behavior of heavy metals in the Seto Inland Sea, the largest semi-enclosed coastal sea in Japan, mass balances of Cu and Zn were studied by application of a simple box model using sedimentation rates and heavy metal contents of core sediments. In 1980, total sedimentary loads of Cu and Zn over the whole area of the Sea were estimated to be 630 and 3500 tons year⁻¹, respectively. Further, the sedimentary loads without (natural) and with human activities were estimated separately to be, respectively, 320 and 310 tons year⁻¹ for Cu and 1800 and 1700 tons year⁻¹ for Zn. Total inputs of Cu and Zn into the Sea, in 1980 were estimated to be 870 and 4250 tons year⁻¹ about one half of this being the result of human activities. 70% of the Cu input and 80% of the Zn input are taken into the sediments. Mean residence times of Cu and Zn in the Sea are calculated to be ≈0.3 and 0.2 years, respectively. Since these values are relatively small compared to the mean residence time of the seawater (0.9 years), Cu and Zn supplied to the Sea are considered to be accumulated rapidly in the sediments.     

U–Pb and fission‐track dating of a submarine pyroclastic rock from southwest Japan

The Okinoshima Formation crops out on Okinoshima Island and comprises a thick sequence (> 200 m) of pyroclastic rocks and alternating beds of sandstone and mudstone. Because Okinoshima Island is located between Honshu and Tsushima Island, the Okinoshima Formation potentially provides an important record of volcanism during the opening of the Japan Sea in northwest Kyushu, as well as a record of the formation of the present Genkai Sea region. In consideration of the lack of previous geochronological work, dating (fission‐track and U–Pb) of igneous zircons extracted from the Okinoshima Formation were undertaken and studied the clay mineral alteration in the pyroclastic material in order to reveal its thermal history. These data are used to constrain the age of the Okinoshima Formation and the present Genkai Sea region. Our results show that no thermal event has reset the fission‐track age after deposition of the pyroclastic rocks, and that the Okinoshima Formation was deposited at 16.2 Ma. The present Genkai Sea region is a deep‐sea basin, and its formation at 16.2 Ma was accompanied by submarine volcanism and rapid subsidence that marked the climactic stage of Japan Sea formation. After 16 Ma, the tectonic setting of the present Genkai Sea region changed from one of extension (related to the formation of the Japan Sea) to one of compression, with uplift occurring under the influence of the clockwise rotation of southwest Japan. Consequently, after 16 Ma the present Genkai Sea region became isolated from the forming processes of the Japan Sea.     

Surface morphological features of boulders on Asteroid 25143 Itokawa

On the sub-kilometer S-type asteroid, 25143 Itokawa, some boulders on rough terrains seem to be exposed without any powdery material covering. Based on surface morphological features, there are two major types of boulders: one has rounded edges and corners (rounded boulders), while the other has angular edges and corners (angular boulders). The surface features of the rounded boulders suggest that they have hardness heterogeneity and that some may be breccias. The angular boulders appear to be more resistant to impact disruption than the rounded ones, which may be due to a difference in lithology. The major constituents of Itokawa may be LL chondrite-like brecciated lithology (rounded boulders) along with a remarkable number of boulders suggesting that lithology is atypical among LL chondrites (angular boulders). Some of both types of boulders contain intersecting and stepped planar foliations. Comparison with meteorite ALH76009 suggests that the planar foliations may be marks where rocks were torn apart. As lithified breccias cannot be formed on present-day sub-kilometer-sized Itokawa, it is reasonable that boulders with various lithologies on Itokawa were formed on its large ancestor(s). The rubble-pile structure of Itokawa suggested by its low density (∼1.9 g/cm³) indicates that boulders on Itokawa are reassembled fragments formed by catastrophic disruption of large ancestor(s).     

Occurrence of water ponding on soil surfaces depending on infiltration rates on Mongolian rangeland

The occurrence of water ponding on soil surfaces during and after heavy rainfall produces surface run‐off or surface water accumulation in low‐lying areas, which might reduce the water supply to soils and result in a reduction of the soil water that plants can use, especially in arid climates. On Mongolian rangeland, we observed ponded water on the surface of a specific soil condition subjected to a heavy rainfall of 30 mm/hr. By contrast, ponded water was not observed for the same type of soil where livestock grazing had been removed for 6–8 years via a fence or for nearby soil containing less clay. We measured the infiltration rate (the saturated hydraulic conductivity of the surface soil, K_s) of the three sites by applying ponded water on the soil surface (an intake rate test). The results showed that K_s in the rangeland was lower than the rainfall intensity in the site where water ponded on the soil surface; however, K_s of the soil inside of the fence has recovered to 3 times that of the soil outside of the fence to exceed the rainfall intensity. Heavy rainfall that exceeds the infiltration rate occurs several times a year at the livestock grazing site where we observed ponded water. Slight water repellency of the soil reduces rain infiltration to increase the possibility of surface ponding for the soil.     

Visible and near-infrared spectral survey of Martian meteorites stored at the National Institute of Polar Research

Martian meteorite chip samples stored at the National Institute of Polar Research (NIPR) have been studied by a visible and near-infrared (VNIR) spectrometer. Measured spots are about 3 × 2 mm in size, which are clearly marked on photographs of the meteorite chips. Rock types and approximate mineral compositions of studied meteorites have been identified or obtained through this spectral survey with no sample preparation required. This study demonstrates that this kind of spectral survey is effective in classifying and describing Marian meteorites, and that such a VNIR spectrometer on a Mars rover would be useful for identifying these kinds of unaltered Mars rocks. Further studies which utilize a smaller spot size are desired for improving the accuracy of identifying the clasts and mineral phases in the rocks.     

Role of bedrock groundwater in the rainfall–runoff process in a small headwater catchment underlain by volcanic rock

The role of bedrock groundwater in rainfall–runoff processes is poorly understood. Hydrometric, tracer and subsurface water potential observations were conducted to study the role of bedrock groundwater and subsurface flow in the rainfall–runoff process in a small headwater catchment in Shiranui, Kumamoto prefecture, south‐west Japan. The catchment bedrock consists of a strongly weathered, fractured andesite layer and a relatively fresh continuous layer. Major chemical constituents and stable isotopic ratios of δ¹⁸O and δD were analysed for spring water, rainwater, soil water and bedrock groundwater. Temporal and spatial variation in SiO₂ showed that stream flow under the base flow condition was maintained by bedrock groundwater. Time series of three components of the rainstorm hydrograph (rainwater, soil water and bedrock groundwater) separated by end member mixing analysis showed that each component fluctuated during rainstorm, and their patterns and magnitudes differed between events. During a typical mid‐magnitude storm event, a delayed secondary runoff peak with 1·0 l s⁻¹ was caused by increase in the bedrock groundwater component, whereas during a large rainstorm event the bedrock groundwater component increased to ≈ 2·5 l s⁻¹. This research shows that the contribution of bedrock groundwater and soil water depends strongly on the location of the groundwater table, i.e. whether or not it rises above the soil–bedrock interface. Copyright © 2010 John Wiley & Sons, Ltd.     

Origin of Bornite Pods in Intrusive Rocks at the Kingking Porphyry Copper-gold Deposit, Southeastern Mindanao, Philippines

At the Kingking porphyry copper-gold deposit, Compostela Valley, south-eastern Mindanao, Philippines, bornite pods occur in the brecciated parts in the biotite diorite porphyry, together with the volcanic rock and diorite fragments without associated stockworks of quartz veinlets. These pods are generally elongated in shape and measure several centimeters across their longest axes. They are composed of bornite and chalcopyrite with traces of calaverite. The δ³⁴S of bornite and subordinate chalcopyrite of bornite pods ranging from −2.2‰ to +0.1‰ are similar to the δ³⁴S of sulfides associated with quartz veinlets such as bornite and chalcopyrite ranging from −4.7‰ to ±0.0‰. This suggests that the ultimate source of sulfur is identical for bornite pods and sulfides associated with quartz veinlets. Bornite pods are associated with volcanic rock and dioritic fragments in the brecciated portion of the biotite diorite porphyry. It was observed that some dioritic fragments contain quartz veinlets, which may indicate an earlier episode of mineralization. Fragments of the earlier dioritic intrusive rocks and the volcanic rocks, together with the sulfides were incorporated into the biotite diorite porphyry magma. A molten sulfide is possible for the composition between bornite and intermediate solid solution at ∼800°C. The sulfides from the earlier dioritic intrusive rocks in the molten state were segregated and then eventually coalesce to form the bornite pods in the brecciated section of the biotite diorite porphyry.     

Sedimentation rates and heavy metal pollution of sediments in the Seto Inland Sea

In the Suo-Nada area of the Seto Inland Sea, Japan, sedimentation rates and the sedimentary record of anthropogenic metal loads were determined by combining the Pb-210 dating technique with heavy metal analysis of the sediments. The sedimentation rates vary from 0.11 to 0.27 g cm^–2 yr^–1. Lower sedimentation rates were observed in the eastern part of the basin which is characterized by a bottom with sand and gravel, and fast tidal currents.Anthropogenic and natural loads of copper and zinc into the sediments are 34 and 326, and 65 and 375 ton yr^–1, respectively. The anthropogenic loads are fairly low compared with those of the other main areas of sediment accumulation in the Seto Inland Sea. The highest level of zinc and copper pollution was observed in the western part of the basin because of waste discharge from an old and big ironworks outside basin since the early 1900's.     

Heavy metals and accumulation rates of sediments in Osaka Bay,the Seto Inland Sea,Japan

The metal load into sediments and the change in the sedimentary environment of Osaka Bay in the Seto Inland Sea have been studied through geochemical analysis of core sediments, using both Pb-210 dating and a selective chemical leaching technique. Analytical results from a 6-m core of sediment show that copper and zinc pollution started in the late 1800's and the present enrichment ratios of copper and zinc, relative to background levels (20 mg kg^–1 for Cu and 94 mg kg^–1 for Zn), are 2.8 and 4.1, respectively. The present anthropogenic copper and zinc loads into Osaka Bay sediments, are 47 and 368 ton yr^–1, while natural copper and zinc loads are 40 and 186 ton yr^–1, respectively. Osaka Bay sediment at the present day is considered to be seriously polluted by zinc, now. The vertical profiles of copper and zinc in four successively separated fractions (10% acetic acid soluble fraction: F-HAC, 0.1M hydrochloric acid-soluble fraction: F-HCl, hydrogen peroxide-soluble fraction: F-H₂O₂ and hydrofluoric acid-soluble fraction: F-HF) from the core sediments indicate that enrichments of copper and zinc in the upper layer of the sediment are dependent on increases in the metal contents of the F-HAC, F-HCl and F-H₂O₂ fractions. Copper in F-HAC, and zinc in F-HAC and F-HCl, seem to be of anthropogenic origin.Results of sequential studies of the whole Seto Inland Sea can be summarized as follows: At the present time, the sedimentary loads of copper and zinc over the whole Seto Inland Sea area are 630 and 3,500 ton yr^–1, respectively, while the natural and anthropogenic loads are 320 and 310 ton yr^–1 for copper and 1,800 and 1,700 ton yr^–1 for zinc, respectively.