基于奇异值分解法的含量-面积法对化探异常的确定

地球化学场的数据通常具有分形的特征。应用奇异值分解方法对元素含量数据矩阵进行分解,对奇异值进行分形统计,得到了分形模型。重建元素含量的数据矩阵。然后利用含量-面积的分形方法对重建后的数据矩阵进行分形处理。使用MAPGIS软件进行统计分析,得出研究地区元素的异常下限,做出元素异常分布图,并与该地区已知矿点的分布图进行叠加分析,预测潜在的成矿区。     

一种单线河流渐变符号的绘制方法

单线河流渐变符号的自动绘制是地图制图研究中的常见问题,在分析和总结现有单线河流渐变符号绘制方法的基础上,提出一种基于分段缓冲区技术的渐变线绘制方法,详细论述该方法的实现过程,并通过实例验证了该方法的可行性,为自动绘制单线河流渐变符号提供一种新的思路.     

松辽盆地白垩纪湖泊水体温度与古气候温度估算

湖泊沉积物沉积的第一场所是湖底,湖底温度的高低影响沉积有机质的保存,也影响湖底下部地层的温度。了解古水体温度尤其是古水底温度情况成为评估松辽盆地白垩系生物气勘探前景的必要研究内容之一。根据已有的古气候研究成果与现今气候对比,得出白垩纪松辽盆地年平均气温约为14~24℃。再根据水库温度的计算方法和利用已有的古纬度及古水深的研究成果计算得出,白垩纪松辽盆地古湖盆水体表面温度为17~25℃;水深大于20 m的深湖区,水底温度为6.2~12.5℃;湖底最深处温度为4.0~11.3℃;青山口组和嫩江组沉积时期,湖水分层明显,湖底温度季节性变化很小且温度较低,约为8℃。湖底的低温对松辽盆地白垩纪生物气勘探是有利的。     

Holocene climate reconstructions of Ulungur Lake (Xinjiang,China) inferred from ostracod species assemblages and stable isotopes

In this paper, the data on the paleoclimatic and paleoenvironmental changes during the Holocene are presented and a discussion is made on a 225-cm-long sediment core from Ulungur Lake, located in Northwest China. The chronology is constructed from six AMS radiocarbon dates on the bulk organic matter. On the basis of the analysis of ostracod assemblages and the shell stable isotopes, the core is divided into three paleoclimatic and paleoenvironmental evolution stages: 9 985–5 250 cal.aB.P. stage is the wettest phase of the core section. The climate changed from moderate-dry to cool-wet, and then to warm-wet in turn, and the lake level rose accordingly, showing the characteristic of a high lake level. 5 250–1 255 cal.aB.P. stage was the driest phase of the core sediment. The climate turned from the early warm-dry to the late warm-wet and the lake level fell and rose again. Finally, the 1 255 cal.aB.P. stage was the medium stage of the section. The temperature was low and then increased after the 1920s and the climate was dry. The whole climatic and environmental evolution records of Lake Ulungur were not only in agreement with the sporopollen record of the same core but also in agreement with the record of environmental changes of adjacent areas. It responded to regional environmental changes and global abrupt climate events, following the westerly climate change mode on 100-year-scale, primarily with cold-wet and warmdry characteristics. __________ Translated from Quaternary Sciences, 2007, 27(3):382–391 [译自:第四纪研究]     

临港新城地质特征及其对新城规划与建设的影响分析

结合临港新城三维地质调查所取得的成果,分析了该城区地质特征及对新城建设的影响,为新城规划建设提供科学依据和服务。     

自动化监测技术在我国首条大型电力隧道中的应用

通过自动化监测在超大工程项目中的应用,利用现有技术手段,对工程进行有效管理,逐渐将对工程的安全、预判起到越来越重要的作用,它可以在为工程节约大量资金情况下,提高预判安全施工的能力,是提高工程管理的重要手段。     

云南兰坪-思茅盆地生物地球化学找钾技术方法研究初探

在生物地球化学和“深穿透”理论的指导下,在兰坪-思茅盆地勐野井钾盐矿区及周边开展了生物地球化学找钾技术方法的探索性研究。沿江城县勐野井钾盐矿区及周边一线,对乔木类植物叶子进行了取样,分析,数据处理,特征指标筛选,获得了研究区植物样品主量和微量组分含量背景值,初步圈定了异常区,与以往圈定的找钾远景区较吻合。该区生物地球化学找钾技术取得较好的效果,今后还需扩大采样区域,获得更多样本数据,将找钾特征指标及其异常值的阈值进一步补充完善。     

EAR70、CLDAS和ERA Interim表层土壤温度在中国地区的评估

本文利用2010—2015年2400多国家气象站逐小时观测数据对覆盖中国的EAR70、CLDAS和ERA Interim 3种表层土壤温度进行了评估和对比。结果表明：空间上CLDAS表层土壤温度精度最高（平均误差为-0.5 ℃，均方根误差为3.0 ℃，相关系数为0.96），受益于CLDAS高精度的陆面初始场，EAR70平均误差得到了改善；时间上ERA Interim再分析表层土壤温度在6:00和夏、秋季精度会明显下降，再分析表层土壤温度在数值较高时段表现出冷偏差，原因是模拟的土壤温度数值上升速度慢，对应的参数化方案有待改进。再分析表层土壤温度在东北地区冬季存在冷偏差，可能和积雪覆盖有关，陆面参数化方案也有待提高。在地形复杂的青藏高原地区，融合地面观测的CLDAS提高了大气驱动的质量进而改进了土壤的模拟。ERA Interim分辨率较粗不适合在青藏高原或者沿海地区使用，结合了CLDAS的EAR70在青藏高原精度提高。土壤表层温度的精度随着高精度的土壤状态初始场进入模式中时间延长会显著下降。因此，CLDAS的实时同化方式，能够有效提高在分析数据的精度。     

高分遥感影像城市绿地自动提取方法

城市绿地作为城市生态系统中不可缺少的一部分,也是城市建设中必须考虑的因素之一,如何更有效地得到城市绿地的分布状况对城市的建设有着深刻的意义.高分辨率遥感影像如今已经成为城市绿地调查的重要数据.为了探究最适用于高分影像中城市绿地自动提取的方法,以南京市某区域为例,以高分二号高分辨率影像为数据源,分别使用了监督分类、利用归一化植被指数(NDVI)分类和基于规则的面向对象分类这三种信息自动提取方法,并将得到的分类结果与精度评价进行了对比分析,结果表明,基于规则的面向对象分类方法的精度明显高于其他两种方法.     

Oil-generation kinetics for organic facies with Type-II and -IIS kerogen in the Menilite Shales of the Polish Carpathians

The Menilite Shales (Oligocene) of the Polish Carpathians are the source of low-sulfur oils in the thrust belt and some high-sulfur oils in the Carpathian Foredeep. These oil occurrences indicate that the high-sulfur oils in the Foredeep were generated and expelled before major thrusting and the low-sulfur oils in the thrust belt were generated and expelled during or after major thrusting. Two distinct organic facies have been observed in the Menilite Shales. One organic facies has a high clastic sediment input and contains Type-II kerogen. The other organic facies has a lower clastic sediment input and contains Type-IIS kerogen. Representative samples of both organic facies were used to determine kinetic parameters for immiscible oil generation by isothermal hydrous pyrolysis and S₂ generation by non-isothermal open-system pyrolysis. The derived kinetic parameters showed that timing of S₂ generation was not as different between the Type-IIS and -II kerogen based on open-system pyrolysis as compared with immiscible oil generation based on hydrous pyrolysis. Applying these kinetic parameters to a burial history in the Skole unit showed that some expelled oil would have been generated from the organic facies with Type-IIS kerogen before major thrusting with the hydrous-pyrolysis kinetic parameters but not with the open-system pyrolysis kinetic parameters. The inability of open-system pyrolysis to determine earlier petroleum generation from Type-IIS kerogen is attributed to the large polar-rich bitumen component in S₂ generation, rapid loss of sulfur free-radical initiators in the open system, and diminished radical selectivity and rate constant differences at higher temperatures. Hydrous-pyrolysis kinetic parameters are determined in the presence of water at lower temperatures in a closed system, which allows differentiation of bitumen and oil generation, interaction of free-radical initiators, greater radical selectivity, and more distinguishable rate constants as would occur during natural maturation. Kinetic parameters derived from hydrous pyrolysis show good correlations with one another (compensation effect) and kerogen organic-sulfur contents. These correlations allow for indirect determination of hydrous-pyrolysis kinetic parameters on the basis of the organic-sulfur mole fraction of an immature Type-II or -IIS kerogen.