2001年1月26日布季Mw7．6级地震的余震震源参数及构造含义

介绍并讨论了现代地震学时期发生的最大大陆板内地震的1000多次余震的空间分布。其数据是由8台便携式数字测震仪组成的台网在主震后17天开始用3周时间记录的。我们已计算了高质量的单一事件位置,所基于的是由这个地区震级为2-5 的地震确定的一维速度模型。余震定位揭示出活动集中在一个近东走向的向南倾斜的面上,呈梯形分布。活动带沿走向逐渐变短,从深度约为5 km的浅部长度约为45 km到 35 km的深度不足25 km。整个破裂区面积约为1300 km2。我们估计主震的静态应力降为16±2 MPa。余震扩展到几乎整个地壳,集中在10 km深的上地壳,和约26 km 深的下地克。断层破裂没有在地表出露,也不知道它在2001地震前是否是活断层。余震数据与布季主震一致,主震是由夭折裂谷的拉张作用形成的断层在收缩过程中的重新激活引起的。     

2004年12月26日苏门答腊—安达曼地震激发的地球自由振荡

根据300~500S的面波估计得到的哈佛大学矩心矩张量断层机制,当周期大于1000S时,地球的地震自由振荡的振幅将异常地大。我们对一个比较陡的断层应用根据地震的体波和面波得到的更真实的破裂模型,估计了自由振荡的振幅近似等于地震矩(6.5×1022N.M),这相当于矩震级为9.15。由于破裂的持续时间达600S,故断层破裂模型足以描述地震的观测结果,但却低估了大地测量位移,这些位移表明在尼科巴群岛和安达曼群岛下面发生了缓慢的断层运动。     

Research on anisotropic parameters by syn-thetic seismogram

Introduction The anisotropy of the Earth crust medium is a common phenomenon(Crampin,1984).More and more observation materials and study results have proved that on most of the Earth′s upper crust is spread fluid-filled cracks and microcracks,which are aligned according to the contempo-rary stress-field.Such distributions of aligned cracks show effectively anisotropy to seismic wave and the phenomenon is called extensive-dilatancy anisotropy(EDA)(Crampin et al,1984).At the same time,it is …     

Inversions for MT data in 2D symmetrical anisotropic media

Introduction Ready and Renkin (1971) were the first to make the research on anisotropy problems in magnetotellurics (MT). The progress in the research is not evident because it is more complex and difficult than isotropic problems. Now, the one-dimensional (1D) anisotropy problems in MT have been well solved, while for the two-dimensional (2D) cases, the numerical solutions have only been obtained for some particular conditions (Ready and Renkin, 1975). As to the three-dimensional (3D) ani…     

Rock composition and origin of the Duwi Formation calcareous rocks, Upper Egypt

Upper Cretaceous phosphorite beds of the Duwi Formation, Upper Egypt, are intercalated with limestone, sandy limestone, marl, calcareous shales, and calcareous sandstone. Calcareous intercalations were subjected to field and detailed petrographic, mineralogical and geochemical investigations in order to constrain their rock composition and origin. Mineralogically, dolomite, calcite, quartz, francolite and feldspars are the non-clay minerals. Smectite, kaolinite and illite represent the clay minerals. Major and trace elements can be classified as the detrital and carbonate fractions based on their sources. The detrital fraction includes the elements that are derived from detrital sources, mainly clay minerals and quartz, such as Si, Al, Fe, Ti, K, Ba, V, Ni, Co, Cr, Zn, Cu, Zr, and Mo. The carbonate fraction includes the elements that are derived from carbonates, maily calcite and dolomite, such as Ca, Mg and Sr. Dolomite occurs as being dense, uniform, mosaic, very fine-to-fine, non-ferroan, and non-stoichiometrical, suggesting its early diagenetic formation in a near-shore oxidizing shallow marine environment. The close association and positive correlation between dolomite and smectite indicates the role of clay minerals in the formation of dolomite as a source of Mg^2＋ -rich solutions. Calcareous rocks were deposited in marine, oxidizing and weakly alkaline conditions, marking a semi-arid climatic period. The calcareous/argillaceous alternations are due to oscillations in clay/carbonate ratio.     

Quantitative morphometric analysis of the Jama River profile in a tectonically active margin (Northwestern Ecuador)

The longitudinal profile of a river channel can be described in function of mathematical expressions. The logarithmic fit is the most used method to describe the relative equilibrium of a channel elevation profile. Rivers showing zones of high channel gradient and convex-upward profiles can be evaluated in function of the offset distance with respect to the logarithmic curve. The Jama River profile has been constructed using differential GPS data for the downstream reach and 4-m-grid DEM data base for the remaining headward profile. The resulting longitudinal profile shows a prominent knickpoint of about 80 m in elevation characterized by sharp local convexity. The offset distance in vertical direction from the logarithmic plot is interpreted as the successive accumulation of multiple uplift episodes associated with the Jama Fault System activity. The horizontal offset is suggested to represent the remaining retreated distance for the upstream propagation of the Jama knickpoint. The highly resistant Cretaceous rocks outcropping along the Jama knickpoint reach acts as an inflection point between two subprofiles that show well-fitted logarithmic curves, thereby representing a temporary partitioned equilibrium along the Jama River profile.     

Cambrian Stem-group Cnidarians with a New Species from the Cambrian Series 3 of the Taebaeksan Basin, Korea

Five species, Lipopora lissa Jell and Jell, 1976, Lipopora daseia Jell and Jell, 1976, Tretocylichne perplexa Engelbretsen, 1993 from Australia, Cambroctoconus orientalis Park, Woo, Lee, Lee, Lee, Han and Chough, 2011 from China, and Cambroctoconus kyrgyzstanicus Peel, 2014 from Kyrgyzstan, belonging to the Cambrian stem-group cnidarians have been documented in the fossil record. Cambroctoconus coreaensis sp. nov., interpreted here as a stem-group cnidarian, from the Seokgaejae section in the Daegi Formation, Taebaek Group (Cambrian Series 3), Taebaeksan Basin, central-eastern Korean Peninsula, has a slender cup-shaped skeleton. A cladistic analysis produced 21 most parsimonious trees, which invariably placed the six stem-group cnidarians below the crown-group, but their relationships within the stem-group are unresolved. Nine out of the 21 trees suggest a monophyletic relationship for the Cambrian stem-group cnidarians, whereas in six other trees a monophyly of Cambroctoconus and Tretocylichne appeared as the sister-group to the crown-group cnidarians with Lipopora at the most basal branch. This result may reflect the fact that crown-group cnidarians evolved in the Precambrian, and suggests that the diversity of stem-group cnidarians was a result of an independent radiation in the Cambrian.     

The Timing of the Palaeoproterozoic Great Oxidation Event using Dykes,Sills and Bolcanics of the Ongeluk Large Igneous Province,Kaapvaal Craton

正The Neoarchaean to Palaeoproterozoic Transvaal Supergroup of the Kaapvaal Craton,southern Africa,is one of the best-preserved and most complete stratigraphic records across a critical in juncture in the Earth’s history.     

The Mesoproterozoic to early Neoproterozoic passive margin Lajeado Group and Apiaí Gabbro,Southeastern Brazil

The Lajeado Group in the Ribeira Belt,southeastern Brazil,corresponds to an open-sea carbonate platform,comprised of seven overlapping siliciclastic and carbonatic formations,intruded in its upper portion by the Apiai Gabbro.These rocks have a Neoproterozoic tectonometamorphic overprint related to arc magmatism and the Brasiliano collisional orogeny.Geochronological constraints are given by new UPb SHRIMP and LA-ICP-MS data for Lajeado Group detrital zircons and for magmatic zircons from the Apiai Gabbro.The youngest detrital zircons in the Lajeado Group are 1400-1200 Ma,and constrain its maximum age of deposition to be 1200 Ma,whereas the 877 ± 8 Ma age for magmatic zircons in the Apiai Gabbro give the minimum age.Detritus source areas are mainly Paleoproterozoic(2200-1800 Ma)with some Archean and Mesoproterozoic contribution(1500-1200 Ma),with distal or tectonic stable cratonic character.The Lajeado Group should be a Stenian-Tonian carbonate platform passive margin of a continent at this time,namely the Columbia/Nuna or the Rodinia.The Apiai Gabbro displays similar age to other intrusive basic rocks in the Lajeado and Itaiacoca groups and represents tholeiitic MORB-like magmatism that we relate to the initial break-up of a Mesoproterozoic continent and the formation of the Brasiliano oceans.