Seismic interference of two nearby horizontal strip anchors in layered soil

In the present analysis, an attempt is made to explore the seismic response of two nearby horizontal strip anchors embedded in non-homogenous c-? soil deposit at different depths. The analysis is performed by using two-dimensional finite-element software PLAXIS 2D. Each anchor carries equal static safe-working load without violating the ultimate uplift capacity under static condition. The soil is assumed to obey the Mohr?CCoulomb failure criterion. The behavior of single isolated anchor subjected to an earthquake loading is determined first to study the interference effect between two anchors. The horizontal acceleration response obtained from the Loma Prieta Gilroy Earthquake (1989) is considered as the input excitation in the analysis. A parametric study is performed by varying the clear spacing (S) between the anchors at different embedment ratios (??). The magnitude of vertical displacement, shear stress, and shear strain developed at different locations of the failure domain is determined for different clear spacings between the anchors.     

Analysis of long-term ozone trend over Delhi and its meteorological adjustment

Present study deals with the statistical analysis of long-term ground level ozone (O₃) trend and the influence of meteorological variables on its variation over Delhi, India. Daily mean and maximum of O₃ and meteorological data, obtained from India Meteorological Department, were arranged for the period of 9 years (1998–2006). Based on the preliminary correlation study of all the data with O₃, six variables viz. daily maximum temperature, daily average relative humidity, dew point, wind speed, visibility, and total sunshine were selected. Classical additive time series decomposition technique was used to obtain seasonally adjusted long-term trend. To analyze the masking effect of meteorology, adjustment was made using Kolmogorov–Zurbenko filters followed by stepwise regression analysis to the smoothed series of O₃ maximum and meteorological variables, which showed that long-term trend was independent of sunshine duration. Results indicate a significant increasing trend with annual increase of 1.13 % for O₃ mean and 3 % for O₃ maximum. Annual deseasonalized trend for seasonal cycle shows bimodal oscillations. About 43 % of O₃ variation was explained by the selected meteorological factors and rest of variation attributed to factors like emission of precursor gases, pollutant transport, policy changes, etc. Among the three tested regression models, performance of Model 2 with variable temperature, wind speed, and visibility was found to be best that resulted in lowering of O₃ trend. Large variability (23 %) was explained by the variable visibility depicted that the emission of primary pollutants not only provides the precursor gases but also control the local photochemical reactions.     

Geochemical modelling, ionic ratio and GIS based mapping of groundwater salinity and assessment of governing processes in Northern Gujarat, India

In semi-arid/arid regions, groundwater is the major source of irrigation, drinking and industrial requirements, water salinity and shortage are major problems of concern. North Gujarat, India, is one such area where highly saline groundwater is generally ascribed to rapid increase of population, agriculture and industries induced decline in water table by unplanned abstraction of groundwater. However, no effort has been made to discriminate the natural and anthropogenic influences on groundwater salinity. In this brief background, the present study attempts to identify the factors and processes controlling the groundwater salinity in the area, based on ionic ratios in integration with various graphical methods, saturation indices and geographical information system. Na⁺/Ca²⁺ > 1 indicates the deficiency of Ca²⁺ possibly due to CaCO₃ precipitation or ion exchange process. Na⁺/Cl^? > 1 and $ {\text{SO}}_{4}{}^{2 - } /{\text{Cl}}^{ - } \gg 0.05 $ suggest salinization is mainly due to wastewater infiltration and/or due to irrigation water return flow. Sea water intrusion in coastal parts, vertical and lateral mixing of water and anthropogenic inputs are also responsible for salinization of groundwater. USSL diagram, Na%, sodium adsorption ratio, residual sodium carbonate and magnesium hazard indicate unsuitability of groundwater for irrigation purposes. To prevent groundwater salinization, appropriate measures need to be taken to control further indiscriminate exploitation of groundwater for irrigation.     

Effect of Aspect Ratio on the Monotonic Shear Behaviour: Micromechanical Interpretations

The effect of aspect ratio on the mechanical behaviour and micromechanics of two different assemblies during drained triaxial shearing are reported in this paper. Discrete element simulations are done on two different sets of assemblies—first assembly consists of particles with aspect ratio 1.0 and second assembly consists of particles with aspect ratio 1.5. A log normal distribution of particle size is adopted for both the samples. The constitutive behaviour of the assemblies and the evolution of the microstructure of the samples under shearing are closely examined and is related to the aspect ratio of the particles constituting the assembly. The spherical harmonic distributions of contact forces and contact normals along with 3-D histograms are plotted to give quantitative information of the variation of these parameters as the loading progresses. The results indicate that as the aspect ratio increases, there is an increase in the maximum deviatoric stress at the macroscopic level. At the microscopic level, the values of the anisotropic coefficients which are representative of the microparameters also show an increase in the magnitude for the assembly with higher aspect ratio particles.     

Induced degradation of crude oil mediated by microbial augmentation and bulking agents

Different bacterial and fungal strains, isolated from petroleum hydrocarbon-contaminated soil, were tested, in isolation as well as in combination, for their ability to degrade total petroleum hydrocarbon (TPH) in soil samples spiked with crude oil (2, 5 or 10 %, w/w) for 30 days. The selected combination of bacterial and fungal isolates, i.e., Pseudomonas stutzeri BP10 and Aspergillus niger PS9, exhibited the highest efficiency of TPH degradation (46.7 %) in soil spiked with 2 % crude oil under control condition. Further, when this combination was applied under natural condition in soil spiked with 2 % (w/w) crude oil along with inorganic fertilizers (NPK) and different bulking agents such as rice husk, sugarcane, vermicompost or coconut coir, the percent degradation of TPH was found to be maximum (82.3 %) due to the presence of inorganic fertilizers and rice husk as bulking agent. Further, results showed that the presence of NPK and bulking agents induced the activity of degradative enzymes, such as catalase (0.718 m mol H₂O₂ g^?1), laccase (0.77 µmol g^?1), dehydrogenase (37.5 µg g^?1 h^?1), catechol 1, 2 dioxygenase (276.11 µ mol g^?1) and catechol 2, 3 dioxygenase (15.15 µ mol g^?1) as compared to control (without bioaugmentation). It was inferred that the selected combination microbes along with biostimulants could accentuate the crude oil degradation as evident from the biostimulant-induced enhanced activity of degradative enzymes.     

A multi-model decision support system (MM-DSS) for avalanche hazard prediction over North-West Himalaya

Natural Hazards - Avalanche forecasting is carried out using physical as well as statistical models. All these models have certain limitations associated with their mathematical formulation that...     

Production of Bauxite Certified Reference Material (BARC-B1201) for Nine Property Values (Al2O3, Fe2O3, SiO2, TiO2, V2O5, MnO,Cr2O3, MgO and LOI) Traceable to SI Units

The National Centre for Compositional Characterisation of Materials (NCCCM) / Bhabha Atomic Research Centre (BARC) and National Aluminium Company Limited (NALCO), India have produced an Indian origin bauxite certified reference material (CRM), referred to as BARC-B1201, certified for major (Al₂O₃, Fe₂O₃, SiO₂, TiO₂, loss on ignition - LOI) and trace contents (V₂O₅, MnO, Cr₂O₃, MgO). Characterisation was undertaken by strict adherence to ISO Guides. A method previously developed and validated in our laboratory, using single step bauxite dissolution and subsequent quantitation (of Al₂O₃, Fe₂O₃, SiO₂, TiO₂, V₂O_5, MnO, Cr₂O₃ and MgO) by ICP-AES (SSBD ICP-AES) was used for homogeneity studies and an inter-laboratory comparison exercise (ILCE) of the candidate CRM. LOI was determined by thermo-gravimetric analysis. Property values were assigned after an ILCE with participation from seventeen reputed government and private sector laboratories in India. The CRM was certified for nine property values: Al₂O₃, Fe₂O₃, SiO₂, TiO₂, V₂O_5, MnO, Cr₂O₃, MgO and LOI, which are traceable to SI units.     

Organization of amphiphiles, Part VIII: Role of polyoxyethylated alkylphenols in optimizing the beneficiation of hydrophilic mineral

The floatability of silica has been determined by adsorbing various concentrations of a series of polyoxyethylated nonyl and octyl alkyl phenols of varying oxyethylene units (10–40 units) to investigate the role of adsorbed layer. It is seen that the floatability of silica increases with increase in concentration till a maximum of  90% in premicellar region and then decrease to minimum of 40–45% in all cases in spite of the significant differences in adsorption densities. Zeta potential measurement reveals that a thin oxyethylene layer is formed at silica–water interface masking silica surface (Pramila K. Misra, P. Somasundaran, J. Surf. Deterg., Vol. 7, 2004, 373). This layer with oxyethylene units lying on silica surface and alkyl chain dangling to the bulk solution provides the same extent of hydrophobicity. The decrease in flotation recovery has been attributed to increase in the solvent hydrophobicity due to formation of premicellar aggregates and micelles.     

Estimation of atmospheric surface layer parameters and numerical simulation using MM5 at Mangalore, West Coast of India

Atmospheric surface layer meteorological observations obtained from 20-m-high meteorological tower at Mangalore, situated along the west coast of India are used to estimate the surface layer scaling parameters of roughness length (z _o) and drag coefficient (C _D), surface layer fluxes of sensible heat and momentum. These parameters are computed using the simple flux–profile relationships under the framework of Monin–Obukhov (M–O) similarity theory. The estimated values of z _o are higher (1.35–1.54 m) than the values reported in the literature (>0.4–0.9 m) probably due to the undulating topography surrounding the location. The magnitude of C _D is high for low wind speed (<1.5 m s^?1) and found to be in the range 0.005–0.03. The variations of sensible heat fluxes (SHF) and momentum fluxes are also discussed. Relatively high fluxes of heat and momentum are observed during typical days on 26–27 February 2004 and 10–11 April 2004 due to the daytime unstable atmospheric conditions. Stable or near neutral conditions prevail after 1700 h IST with negative SHF. A mesoscale model PSU/NCAR MM5 is run using a high-resolution (1 km) grid over the study region to examine the influence of complex topography on the surface layer parameters and the simulated fluxes are compared with estimated values. Spatial variations of the frictional velocity (u _*), C _D, surface fluxes, planetary boundary layer (PBL) height and surface winds are noticed according to the topographic variations in the simulation.     

Late Cretaceous mafic dykes in the Dharwar craton

Palaeomagnetic, geochemical and geochronological studies have been conducted on a set of dolerite dykes intruding the Peninsular gneisses near Huliyurdurga town, Karnataka, as a reconnaissance survey indicated a Cretaceous age for them. The dykes are mainly tholeiitic in composition with their 87Sr/86Sr ratios tightly clustered around 0·7045. Their palaeomagnetic data (D _m =329°,I _m =−55°) and the corresponding palaeopole coordinates (λ _p = 34°S,L _p =108°E) are strikingly close to those of the Deccan Traps to the north. Whole rock K-Ar ages of these dykes ranging between 69 and 84 Ma are also similar to the range of K-Ar ages of the Deccan basalts. The chemical, palaeomagnetic and temporal coherence between the dykes and the Deccan basalts indicate that they may indeed be tectonically related events.