Land surface temperature and emissivity estimation for Urban Heat Island assessment using medium- and low-resolution space-borne sensors: A review

The Urban Heat Island (UHI) phenomenon, a typical characteristic on urban landscapes, has been recognised as a key driver to the transformation of local climate. Reliable retrieval of urban and intra-urban thermal characteristics using satellite thermal data depends on accurate removal of the effects of atmospheric attenuations, angular and land surface emissivity. Several techniques have been proposed to retrieve land surface temperature (LST) from coarse resolution sensors. Medium spatial resolution sensors like the Advanced Space-borne Thermal Emission and Reflection Radiometer and the Landsat series offer a viable option for assessing LST within urban landscapes. This paper reviews the theoretical background of LST estimates from the thermal infrared part of the electromagnetic spectrum, LST retrieval algorithms applicable to each of the commonly used medium-resolution sensors and required variables for each algorithm. The paper also highlights LST validation techniques and concludes by stipulating the requirements for LST temporal and spatial configuration.     

Contribution of Landsat 8 data for the estimation of land surface temperature in Batna city,Eastern Algeria

In this study, we presented a mono-window (MW) algorithm for land surface temperature retrieval from Landsat 8 TIRS. MW needs spectral radiance and emissivity of thermal infrared bands as input for deriving LST. The spectral radiance was estimated using band 10, and the surface emissivity value was derived with the help of NDVI and vegetation proportion parameters for which OLI bands 5 and 4 were used. The results in comparison with MODIS (MOD11A1) products indicated that the proposed algorithm is capable of retrieving accurate LST values, with a correlation coefficient of 0.850. The industrial area, public facilities and military area show higher surface temperature (more than 37 °C) in comparison with adjoining areas, while the green spaces in urban areas (34 °C) and forests (29 °C) were the cooler part of the city. These successful results obtained in the study could be used as an efficient method for the environmental impact assessment.     

Experimental evaluation of the performance of earth levees deteriorated by wildlife activities

In this study, an earth levee model is constructed to investigate the impact of animal burrows on the integrity and performance of earthen structures. A series of centrifuge experiments are conducted on homogenous scaled-down 1H:1V levee models built from the natural Kasama soil. Both intact and deteriorated models were subject to a 35g acceleration level. Invasive animal intrusions were introduced in the form of horizontal array of idealized cylindrical burrows at the mid-height of the levee. The water level was gradually increased during the centrifuge flight, and the response of the levee was monitored throughout the test. Pore pressures were recorded using pressure transducers placed at preselected locations within the model. Surface displacements were measured using laser LVDTs and supplemented with three digital cameras for tracking the overall deformation pattern of the levee model. A summary of the test procedure and selected results is presented herewith. The observed deformation mechanism due to the presence of animal burrows is also described. As compared with the intact levee, the presence of burrows is found to alter the pattern of the water flow through the deteriorated levee structure—leading to a notable increase in the exit hydraulic gradient, internal erosion, and subsequently slope failure.     

Groundwater potentiality mapping of hard-rock terrain in arid regions using geospatial modelling: example from Wadi Feiran basin,South Sinai,Egypt

Identifying a good site for groundwater exploitation in hard-rock terrains is a challenging task. In Sinai, Egypt, groundwater is the only source of water for local inhabitants. Interpretation of satellite data for delineation of lithological units and weathered zones, and for mapping of lineament density and their trends, provides a valuable aid for the location of groundwater promising areas. Complex deformational histories of the wide range of lithological formations add to the difficulty. Groundwater prospect mapping is a systematic approach that considers the major controlling factors which influence the aquifer and quality of groundwater. The presented study aims to delineate, identify, model and map groundwater potential zones in arid South Sinai using remote sensing data and a geographic information system (GIS) to prepare various hydromorphogeological thematic maps such as maps of slope, drainage density, lithology, landforms, structural lineaments, rainfall intensity and plan curvature. The controlling-factor thematic maps are each allocated a fixed score and weight, computed by using a linear equation approach. Furthermore, each weighted thematic map is statistically computed to yield a groundwater potential zone map of the study area. The groundwater potential zones thus obtained were divided into five categories (very poor, poor, moderate, good and very good) and were validated using the relation between the zone and the spatial distribution of productive wells and of previous geophysical investigations from a literature review. The results show the groundwater potential zones in the study area, and create awareness for better planning and management of groundwater resources.     

Flow units delineation of multiple hydrocarbon reservoirs using hydraulic zonation technique via cluster analysis algorithm,Zeit Bay Field,Gulf of Suez,Egypt

Investigation of hydraulic units in drilled wells through multiple reservoirs in Zeit Bay Field is the main target of this paper. Karim Limestone and Nubian Sandstone are target reservoirs in this study. Hydraulic zones provide a fundamental unit for subsequent reservoir characterization and simulation and also prove to be helpful in defining future well completion and work over practices. Hydraulic zonation by means of cluster analysis has been utilized to achieve this target. Hierarchical cluster analysis, elbow method, and k-means clustering are the main steps of this analysis. Petrophysical properties obtained from cores are utilized to perform this zonation. These properties are permeability and porosity data. Results have been validated by comparing the geological behavior of each zone against the measured permeability curve. Finally through this zonation, flow units which have the potential to extract fluids are determined more accurately. Petroleum geologists and engineers are more interested in these results. The cluster analysis flow suggesting in this paper is cost-effective due to lack of need for any commercial software.     

An overview of phosphate rocks and their mining impact on groundwater,Eastern Desert,Egypt

The Eastern Desert of Egypt represents a remote arid area which is scarce in water resources. The area is characterized by many mining sites to exploit the phosphate deposits; thus, these activities can generate groundwater contaminants. The main objective of the present study is discussing the effect of the mining activities and phosphate bearing rocks on groundwater. The obtained results pointed out that the water bearing formations can be distinguished as Quaternary alluvial, Oligocene sandstone, Campanian phosphate limestone (Duwi Formation), and Precambrian basement rocks. Some of the investigated groundwater shows relatively high concentrations of trace elements compared to other samples, such as Pb, Zn, Cu, Cr, Ni, and Sr. This is consistent with the analyses of phosphate rocks which are also enriched in the same trace elements. The high groundwater salinity is due to evaporation, limited re-charge, and leaching of salts in rocks. The results of speciation modeling reveal that majority of groundwater samples are supersaturated with calcite, aragonite, and dolomite, and some samples are also at equilibrium or supersaturated with hydroxyapatite. The groundwater quality in the study area evaluated for human drinking, livestock and poultry domestic, and industrial purposes is not suitable in most wells. It is obvious that the groundwater contamination occurs when drilling wells penetrate the phosphate bearing beds and not only at mining activity sites. Therefore, it is recommended to avoid any groundwater exploration from the Duwi Formation and also select the drilling sites outside the mining areas.     

Investigation of the quality and physical-geochemical characteristics of the drinking water in Gümüşhane (Turkey) city central

The physical (turbidity, color, smell, taste, pH, and conductivity) and geochemical properties (Ca, Mg, Na, Fe, Mn, Al, K, Cl^?, HCO₃ ^?, SO₄ ^2?, Fe, Cu, Co, Ni, Zn, Cd, Pb, and Cr) of the drinking water in Gümü?hane city center were determined. This city center constitutes the study area. The pH levels of the water samples ranged from 6.3 to 8.2, and their conductivities ranged between 240 and 900 μS. These findings were concordant with the drinking water standards of the Turkey Standard Institute and the World Health Organization. The hardness of the water samples in the study area was between 18.1 and 115.1 °Fr. These samples were classified as extremely hard, hard, and quite hard. In addition, an assessment using the criteria for Inland Surface Water Classification indicated that considering certain parameters (pH levels, amount of Na, SO₄ ^2?, Fe, Mn, Al, Co, Ni, Cu, and Cr), the samples belonged to class I (high quality) water. When Cl^? amount and conductivity were considered, the samples belonged to the first and second classes (less polluted) of water. The water in the study area was generally classified as carbonated and sulfated (Ca + Mg > Na + K) water classes. This water contained more weak acids than strong acids (HCO₃ ^? + CO₃ ^2? > Cl^? + SO₄ ^2?). The pH levels (6.3–8.2) of the water in the study area were unrelated to the varying concentrations of metals in the water. Elements such as Fe, Ni, Cd, Pb, Zn, and Cu increase in the water through the water–rock interaction in the area in which water rises or through the mixture of water with either mine or industrial wastes. In addition, several water samples belonged to an acceptable water class for drinking and usage.     

Process of serpentinization in the ultramafic massif of Beni Bousera (internal Rif,Morocco)

The Beni Bousera massif forms part of the Sebtide units in the internal Rif Mountain (Morocco). It is mainly composed of mantle peridotites surrounded by crustal metamorphic rocks (kinzigites, micaschists, and schists). The serpentinization affects all of peridotite massif to various degrees. Serpentinization is concentrated at the top of the peridotites, along the mylonitized zone, and in the NE part of the massif. It is manifested by the formation of mesh and hourglass textures along the tectonic foliation in the highly serpentinized peridotites; and brecciated texture in the least serpentinized peridotites. Pyroxene minerals are still intact hosting few serpentine veins. These petrographic features are consistent with the geochemical data, marked by the increasing of LOI and decreasing of MgO and FeO toward the top of the massif and Aaraben fault. The Raman characterization of serpentine with the brecciated mesh and hourglass textures correspond to lizardite type whereas the serpentine with the vein texture is formed by lizardite + chrysotile.