Unexpectedly high-PGE chromitite from the deeper mantle section of the northern Oman ophiolite and its tectonic implications

Unusually high, platinum-group element (PGE) enrichments are reported for the first time in a podiform chromitite of the northern Oman ophiolite. The chromitite contains Б.5 ppm of total PGE, being highly enriched in the IPGE subgroup (Ir, Os and Ru) and strongly depleted in the PPGE subgroup (Rh, Pt and Pd). Its platinum-group minerals (PGMs) are classified into three types arranged in order of abundance: (1) sulphides (Os-rich laurite, laurite-erlishmanite solid solution and an unnamed Ir sulphide), (2) alloys (Os-Ir alloy and Ir-Rh alloy), and (3) sulpharsenides (irarsite and hollingworthite). The high PGE concentrations are observed only in a discordant chromitite deep in the mantle section, which has high-Cr# (>0.7) spinel with an olivine matrix. All the other types of chromitite (in the Moho transition zone (MTZ) and concordant pods in the deeper mantle section) are poor in PGEs and tend to have spinels with lower Cr# (up to 0.6). This diversity of chromitite types suggests two stages of magmatic activity were responsible for the chromitite genesis, in response to a switch of tectonic setting. The first is residual from lower degree, partial melting of peridotite, which produced low-Cr#, PGE-poor chromitites at the Moho transition zone and, to a lesser extent, within the mantle, possibly beneath a fast-spreading mid-ocean ridge. The second chromitite-forming event involves higher degree partial melting, which produced high-Cr#, PGE-rich discordant chromitite in the upper mantle, possibly in a supra-subduction zone setting.     

Geochemical stream sediment survey in Winder Valley, Balochistan, Pakistan

A pilot scale geochemical survey of sediments from the Winder Stream (SW Pakistan) and its tributaries was carried out. The Winder Stream mainly receives sediment from the southern extensions of the Mor and Pab Ranges in the District of Lasbela (Balochistan). In these two mountain ranges, rocks from Jurassic to Cretaceous age are exposed. Rocks of the Ferozabad Group comprise of carbonates and siliciclastics of Lower–Middle Jurassic age and occupy the dominant part of the Mor Range. These strata host syngenetic and epigenetic Zn–Pb–Ba mineralizations of Stratiform Sediment-Hosted (SSH) and Mississippi Valley Type (MVT) deposits.Quantitative estimates of mobile and immobile elements were made from active stream sediments of the Winder stream and its tributaries. The samples were analyzed for Ag, Zn, Pb, Cu, Ni, Co, V, Mn, Fe and Ba using atomic absorption spectroscopy. The abundance of these elements is discussed in relation to local geological conditions such as bedrock, climate, weathering, mobility and pH of the dispersing waters. A number of Zn anomalies have been distinguished in the study area. Kharrari (Zn, 360 ppm), Sand (Zn, 340 ppm) and Draber (Zn, 210 ppm) are demarcated as new areas for Zn mineralization. The present study also indicates prospects of Ag, Cu and V in the rocks of the Mor Range.Relationships between various elements have been identified from scattergrams and reflect genetic associations. Whereby the positive correlation between Cu–Zn (0.55, n=18) and Cu–Pb (0.63) is related to possible sulphide mineralization.     

Gold Mineralization and Occurrence of Sinter in the Hoshino Area, Fukuoka Prefecture, Japan

Abstract. Several epithermal gold deposits occur in the Hoshino area, which is located in the western end of the late Cenozoic Hohi volcanic zone, north‐central Kyushu, Japan. The area is characterized by intermediate to felsic extrusive rocks of Pliocene age. In the Hoshino area, the shallow manifestation of the hydrothermal activity is exposed on the surface. Several outcrops of sinter are still preserved on the top of hydro thermally altered volcanic rocks, and high‐grade gold‐bearing quartz veins occur on the surface at lower levels. The hydrothermal alteration resulted into well‐developed alteration zones. The zonal alteration pattern, primarily of near‐neutral pH type, is characterized by the outer smectite zone of a lower temperature, and the inner mixed layer minerals zone of a higher temperature. Quartz vein‐related or fracture‐controlled alteration, is represented by the occurrence of interstratified illite/smectite and K‐feldspar, suggesting a potassium‐enriched alteration. The mineralization in the Hoshino area is recognized on the surface by the occurrence of gold‐bearing quartz veins distributed mainly in the mixed layer minerals zone. The fracture system related to the gold mineralization is mainly characterized by NW‐SE trend. The alteration pattern and the mineralogical composition of the veins suggest that the mineralizing fluids had near‐neutral pH and the mineralization is of low‐sulfidation‐type. Fluid inclusion data and textures observed in quartz veins indicate that gold precipitated during boiling. The chemical composition of quartz veins shows that high‐grade gold‐bearing quartz veins are characterized by higher content of Al₂O₃, K₂O and Rb. Several outcrops of silica‐sinters are distributed on the top of the mixed layer minerals zone. Although their structures are not very well preserved, because of later silicification, the Hoshino sinters still show characteristic textures identical to those observed in modern sinters, such as the presence of plant fossil incorporated into the sinters, the strongly developed depositional laminations and the columnar structures perpendicular to the depositional surfaces. Quartz is the only silica mineral constituting the Hoshino sinters presently. The conversion of amorphous silica into quartz was probably governed by higher temperatures resulting from later hydrothermal activity. This later hydrothermal activity is reflected by the intense silicification affecting mainly the lower parts of the sinters and also by the presence of quartz veins cutting the sinters. The distribution of sinters in the Hoshino area is very significant. The presence beneath the sinters of concealed high‐grade gold‐bearing quartz veins should be highly considered and exploration work is strongly suggested.     

Structure sismique du socle paléozoı̈que du bassin des Doukkala,Môle côtier,Maroc occidental. Indication en faveur de l'existence d'une phase éo-varisqueSeismic structure of the Doukkala basin,Palaeozoic basement,western Morocco: a hint for an Eovariscan fold-and-thrust belt

Seismic profiles and well data from the Doukkala basin unravel the structure of the Palaeozoic basement and suggest that this coastal zone of western Morocco was affected by a compressive phase during the Frasnian. This resulted in the formation of upright, plurikilometric folds associated with reverse faults (North Doukkala), and of asymmetrical folds associated with mostly west verging ramps (South Doukkala). Folding involved all pre-Upper Frasnian formations and caused partial or total hiatus of Upper Frasnian–Strunian strata. This event can be correlated with the orogenic phase reported from more internal domains of the Morocco Hercynian belt, where it is referred to as the ‘Bretonne’ or ‘Eovariscan’ phase. To cite this article: H. Echarfaoui et al., C. R. Geoscience 334 (2002) 13–20     

Caractérisation des paragenèses et des paléocirculations fluides dans l'indice d'or de Bleı̈da (Anti-Atlas,Maroc)Characterization of the paragenesis and the fluid palaeo-circulations in the gold showings of Bleida (Anti-Atlas,Morocco)

The gold showings at Bleida are hosted in Late Pan-African N50–80 °E quartz–hematite–chlorite 1 tension lenses that are related to the activity of major sinistral sub-east–west thrusts. Ores result from three superimposed stages of fluid migration. Gold occurs in microcracks offsetting the earlier minerals. Fluids evolved from COHN compositions with a saline component to boiling aqueous fluids. Pressure and temperature decreased from 50 MPa and 300 °C to less than 4 MPa and 150 °C. Thus, the gold showings at Bleida were formed in a typical geothermal (epithermal) setting, likely controlled by the Late Pan-African magmatism. To cite this article: A. Barakat et al., C. R. Geoscience 334 (2002) 35–41     

Premier pôle paléomagnétique,d'âge Moscovien contraint par un test du pli,obtenu dans le bassin d'Illizi (Craton saharien,Algérie)First palaeomagnetic pole,of Moscovian age constrained by a fold test,in the Illizi Basin (Saharan Craton,Algeria)

Palaeomagnetic study, carried out in the Moscovian (～305 Ma) formation in the Edjeleh anticline, shows the existence of three magnetisation components. Two of them are probably Cenozoic and Permian remagnetisations. The third component determined by both well defined ChRMs and remagnetisation circles analysis passes the fold test. Because the folding started before or during the Stephano-Autunian, this third component is the primary magnetisation. Its palaeomagnetic pole (28.3°S, 58.9°E), close to other poles from the Saharan platform obtained from neighbouring periods but without palaeomagnetic tests, confirms the age of these last data. To cite this article: B. Bayou et al., C. R. Geoscience 334 (2002) 81–87.     

Deep structure of the northeastern margin of the Parnaiba Basin, Brazil, from magnetotelluric imaging

The magnetotelluric (MT) method has been applied to the determination of the deep resistivity structure of the northeastern margin of the Parnaiba Basin. Transient electromagnetic (TEM) and MT data were collected in early 1999 along a 95 km long N–S line, extending from the coast across the projected subcrop position of a discontinuous fault found to the west of the study area that is believed to be a possible basin‐bounding fault. The MT data were processed to yield the TE‐ and TM‐mode responses and then corrected for static shift using central‐loop and single‐loop TEM data, respectively. Regularized 2D MT inversion was subsequently undertaken using a structured initial model with the near‐surface constrained by TEM inversion results. As a consistency check, we performed another set of 2D inversions using different smooth initial models. The various optimal 2D inversion models show clearly the presence of a major basement trough, over 2 km deep, located about 70 km from the coast. We interpret it as possibly marking the main basin margin and suggest that it may have implications for groundwater resource development in the area.     

Computational modeling of cyclic mobility and post-liquefaction site response

Under seismic excitation, liquefied clean medium to dense cohesionless soils may regain a high level of shear resistance at large shear strain excursions. This pattern of response, known as a form of cyclic mobility, has been documented by a large body of laboratory sample tests and centrifuge experiments. A plasticity-based constitutive model is developed with emphasis on simulating the cyclic mobility response mechanism and associated pattern of shear strain accumulation. This constitutive model is incorporated into a two-phase (solid–fluid), fully coupled finite element code. Calibration of the constitutive model is described, based on a unique set of laboratory triaxial tests (monotonic and cyclic) and dynamic centrifuge experiments. In this experimental series, Nevada sand at a relative density of about 40% is employed. The calibration effort focused on reproducing the salient characteristics of dynamic site response as dictated by the cyclic mobility mechanism. Finally, using the calibrated model, a numerical simulation is conducted to highlight the effect of excitation frequency content on post-liquefaction ground deformations.     

Screening model for volatile pollutants in dual porosity soils

This paper develops mass fraction models for transport and fate of agricultural pollutants in structured two-region soils. Mass fraction index models, based on a semi-infinite domain solution, are derived that describe leaching at depth, vapor losses through soil surface, absorption, and degradation in the dynamic- and stagnant-water soil regions. The models predict that leaching is the result of the combined effect of the upward vapor-phase transport relative to downward advection, residence time relative to half-life, dispersion, and lateral diffusive mass transfer. Simulations show that leached fraction of volatile compounds does not always decrease monotonically with increased residence time relative to the pollutant half-life, as a result of complex interactions among the different physical and biochemical processes. The results show that leaching, volatilization, and degradation losses can be affected significantly by lateral diffusive mass transfer into immobile-water regions and advection relative to dispersion (i.e. Peclet number) in the mobile-water regions. It is shown that solute diffusion into the immobile phase and subsequent biochemical decay reduces leaching and vapor losses through soil surface. Potential use of the modified leaching index for the screening of selected pesticides is illustrated for different soil textures and infiltration rates. The analysis may be useful to the management of pesticides and the design of landfills.