Dipolarization fronts in the magnetotail plasma sheet

We present a THEMIS study of a dipolarization front associated with a bursty bulk flow (BBF) that was observed in the central plasma sheet sequentially at X=−20.1, −16.7, and −11.0R_E. Simultaneously, the THEMIS ground network observed the formation of a north-south auroral form and intensification of westward auroral zone currents. Timing of the signatures in space suggests earthward propagation of the front at a velocity of 300 km/s. Spatial profiles of current and electron density on the front reveal a spatial scale of 500 km, comparable to an ion inertial length and an ion thermal gyroradius. This kinetic-scale structure traveled a macroscale distance of 10R_E in about 4 min without loss of coherence. The dipolarization front, therefore, is an example of space plasma cross-scale coupling. THEMIS observations at different geocentric distances are similar to recent particle-in-cell simulations demonstrating the appearance of dipolarization fronts on the leading edge of plasma fast flows in the vicinity of a reconnection site. Dipolarization fronts, therefore, may be interpreted as remote signatures of transient reconnection.     

Fungal colonies in open fractures of subseafloor basalt

The deep subseafloor crust is one of the few great frontiers of unknown biology on Earth and, still today, the notion of the deep biosphere is commonly based on the fossil record. Interpretation of palaeobiological information is thus central in the exploration of this hidden biosphere and, for each new discovery, criteria used to establish biogenicity are challenged and need careful consideration. In this paper networks of fossilized filamentous structures are for the first time described in open fractures of subseafloor basalts collected at the Emperor Seamounts, Pacific Ocean. These structures have been investigated with optical microscopy, environmental scanning electron microscope, energy dispersive spectrometer, X-ray powder diffraction as well as synchrotron-radiation X-ray tomographic microscopy, and interpreted as fossilized fungal mycelia. Morphological features such as hyphae, yeast-like growth and sclerotia were observed. The fossilized fungi are mineralized by montmorillonite, a process that probably began while the fungi were alive. It seems plausible that the fungi produced mucilaginous polysaccharides and/or extracellular polymeric substances that attracted minerals or clay particles, resulting in complete fossilization by montmorillonite. The findings are in agreement with previous observations of fossilized fungi in subseafloor basalts and establish fungi as regular inhabitants of such settings. They further show that fossilized microorganisms are not restricted to pore spaces filled by secondary mineralizations but can be found in open pore spaces as well. This challenges standard protocols for establishing biogenicity and calls for extra care in data interpretation.     

Experimental estimation of velocities and anisotropy of a series of Swedish crystalline rocks and ores

To provide a guide for future deep (<1.5 km) seismic mineral exploration and to better understand the nature of reflections imaged by surface reflection seismic data in two mining camps and a carbonatite complex of Sweden, more than 50 rock and ore samples were collected and measured for their seismic velocities. The samples are geographically from the northern and central parts of Sweden, ranging from metallic ore deposits, meta‐volcanic and meta‐intrusive rocks to deformed and metamorphosed rocks. First, ultrasonic measurements of P‐ and S‐wave velocities at both atmospheric and elevated pressures, using 0.5 MHz P‐ and S‐wave transducers were conducted. The ultrasonic measurements suggest that most of the measured velocities show positive correlation with the density of the samples with an exception of a massive sulphide ore sample that shows significant low P‐ and S‐wave velocities. The low P‐ and S‐wave velocities are attributed to the mineral texture of the sample and partly lower pyrite content in comparison with a similar type sample obtained from Norway, which shows significantly higher P‐ and S‐wave velocities. Later, an iron ore sample from the central part of Sweden was measured using a low‐frequency (0.1–50 Hz) apparatus to provide comparison with the ultrasonic velocity measurements. The low‐frequency measurements indicate that the iron ore sample has minimal dispersion and attenuation. The iron ore sample shows the highest acoustic impedance among our samples suggesting that these deposits are favourable targets for seismic methods. This is further demonstrated by a real seismic section acquired over an iron ore mine in the central part of Sweden. Finally, a laser‐interferometer device was used to analyse elastic anisotropy of five rock samples taken from a major deformation zone in order to provide insights into the nature of reflections observed from the deformation zone. Up to 10% velocity‐anisotropy is estimated and demonstrated to be present for the samples taken from the deformation zone using the laser‐interferometery measurements. However, the origin of the reflections from the major deformation zone is attributed to a combination of anisotropy and amphibolite lenses within the deformation zone.     

Forest tenure reform in the age of climate change: Lessons for REDD+

Numerous authors have stressed the importance of guaranteeing and protecting the tenure and human rights of indigenous and other forest-based communities under schemes for reducing emissions from deforestation and forest degradation (REDD, or REDD+); and important international indigenous organizations have spoken out strongly against REDD+. This article examines two specific issues that present risks for local communities: rights to forests and rules for resource use. It draws on the findings of a study conducted by the Center for International Forestry Research (CIFOR) on forest tenure reforms in selected countries in Asia, Africa and Latin America from 2006 to 2008. The study underlines the numerous obstacles faced by communities after rights are won, in moving from statutory rights to their implementation and to access to benefits on the ground. It argues that there is currently little reason to expect better results from national policies under REDD+ without binding agreements to protect local rights.     

Modelling thermal transients from magmatic underplating—an example from the Vøring margin (NE Atlantic)

The thermal impact of several kilometre-thick magmatic underplating in the lower continental crust is studied with analytical and numerical methods. Simple analytical solutions are derived for the thermal transient in the case of an infinite depth below the underplate and also for the case of a finite depth (down to the asthenosphere). It is shown that these solutions lead to simple approximations for when the transient surface heat flow is at its maximum, what the maximum is, and for how long the transient lasts. Even though these solutions assume that the underplate is emplaced instantaneously, they are useful in the interpretation of underplating over finite time spans. A numerical scheme is suggested for the modelling of underplating that handles both short time intervals as well as long intervals. The scheme treats magmatic underplating in a mass and energy conservative manner, and it is compared against the analytical solutions. Finally, the analytical and numerical results for thermal transients are applied to a transect from the Vøring margin (NE Atlantic), with respect to various degrees of early Cenozoic magmatic intrusion. It appears that more than half of the lower crustal body (LCB) in the Vøring margin must be magmatic underplating for the vitrinite reflectance to be substantially higher than for the non-magmatic case, where the LCB is assumed to comprise Caledonian crust.     

Indicators of road network vulnerability to storm-felled trees

In this paper, we exemplify the use of simple indicators of wind storm vulnerability of the road network that can be derived from existing geographic datasets. We point out the possible utilization of the datasets, applying GIS techniques, for highlighting road sections that, due to adjacency of high forest stands, are sensitive to closure by storm-felled trees. Indicators reflecting the reduced access to different areas or to the population in need of emergency aid can be derived based on the parameter tree height along roads and road network analysis. As a case in this study, the methodology is applied to elderly people (+80 years) with possible need of daily care at home following a severe storm. A comparison to the extreme 2005 storm felling in southern Sweden reveals that only limited estimates of road network disruption due to storm-felled trees are possible using the indicators, as other factors, for example, wind direction, which determine the exact impact of a particular storm are not taken into account. However, the indicators and network analysis also provide a possibility to draw attention to locations where disruptions of the road network would have significant effects on the accessibility to large surrounding areas. Potential critical road closures can be identified and preventive measures considered locally at these points.     

Global-Oscillation Eigenfunction Measurements of Solar Meridional Flow

We describe and apply a new helioseismic method for measuring solar subsurface axisymmetric meridional and zonal flow. The method is based on a theoretical model of the response of global-oscillation eigenfunctions to the flow velocity and uses cross spectra of the time-varying coefficients in the spherical-harmonic expansion of the photospheric Doppler-velocity field. Eigenfunction changes modify the leakage matrix, which describes the sensitivity of the spherical-harmonic coefficients to the global-oscillation modes. The form of the leakage matrix in turn affects the theoretically expected spherical-harmonic cross spectra. Estimates of internal meridional and zonal flow were obtained by fitting the theoretical flow-dependent cross spectra to spherical-harmonic cross spectra computed from approximately 500 days of full-disk Dopplergrams from the Helioseismic and Magnetic Imager (HMI) on the SDO spacecraft. The zonal-flow measurements, parameterized in the form of “a” coefficients, substantially agree with measurements obtained from conventional global-mode-frequency analysis. The meridional-flow estimates, in the form of depth-weighted averages of the flow velocity, are similar to estimates obtained from earlier analyses, for oscillation modes that penetrate the outermost one-third of the convection zone. For more deeply penetrating modes, the inferred flow velocity increases significantly with penetration depth, indicating the need for either a modification of the simple conveyor-belt picture of meridional flow or improvement in the cross-spectral model.     

Phytoplankton life cycle transformations lead to species-specific effects on sediment processes in the Baltic Sea

In order to study the sediment response to different addition of organic matter, we added cultures of the dinoflagellates Scrippsiella hangoei and Woloszynskia halophila and the diatom Pauliella taeniata to aquaria containing natural sediment. The biomass added was 1550–3260 mg C m⁻², and in the control, no biomass was added (n=3). Oxygen profiles at the sediment–water interface and inorganic nutrients in the near bottom water were determined once a week. In the additions of P. taeniata and W. halophila the sediment quickly became anoxic, and subsequently there was a flux of >1 mmol PO₄³⁻ m⁻² d⁻¹ out of the sediment in these treatments. The majority of the released P came from P stored in the sediment and not from the organic phosphorus added. The result was very different for the S. hangoei addition. This species underwent a life cycle change to form temporary cysts. During this process there was a net uptake of nutrients. After the formation of cysts the concentration of inorganic nutrient was similar to that of the control. Cysts generally survive for long periods in the sediment (months to years) before germinating, but can also be permanently buried in the sediment. The novel idea presented here is that the phytoplankton composition may directly affect sediment processes such as oxygen consumption and phosphorus release, through species-specific life cycle changes and yields of resting stages produced prior to sedimentation. This can be an important aspect of nutrient cycling in eutrophic waters, like the Baltic Sea, where there is large year-to-year difference in the amount of resting stages settling at the sea floor, mainly due to differences in abundance of diatoms and dinoflagellates during the spring bloom. If yields of resting stages change, e.g. due to changes in the phytoplankton community, it may lead to alterations in the biogeochemical cycling of nutrients.     

The effect of organics on lead sorption onto Apatite II™

Training activities at firing ranges, both civilian and military, deliver large quantities of Pb bullets into range soils where the physical and geochemical properties of the soil can influence Pb transport. Some best management practices (BMPs) developed for range managers include the addition of phosphate amendments, such as apatite, to immobilize Pb and other metals associated with firing ranges. In this study, the effect of the organic matter content of apatite II™ on its metal sorption properties was investigated. Batch and column experiments were conducted using mechanically, enzymatically, and thermally-treated forms of Apatite II™ to sorb soluble Pb. In batch experiments, mechanically and enzymatically-treated Apatite II™ reduced soluble Pb concentrations from 29% to 96%, depending on the age of the Apatite source. Thermally-treated Apatite II™ consistently reduced soluble Pb concentrations in solution by more than 90%, regardless of aging. The mechanically and enzymatically-treated Apatite II™ produced significantly higher dissolved organic carbon (DOC) and biochemical oxygen demand (BOD) concentrations while undergoing aging. This contrasts with the thermally-treated Apatite II™ that produced very low to non-detectable levels of DOC and BOD while aging. To determine the effects of thermal treatment on performance efficiencies, studies were performed using 500 mg L⁻¹ Pb solutions in columns packed with Apatite II™ that had been preheated at various temperatures for 2 h. The column study showed Pb loading of the Apatite II™ at different thermal treatments that ranged from 10.5% to 16.8% Pb by weight of substrate. The Pb loading capacity (by weight of substrate) increased as the treatment temperature of the Apatite II™ increased.