西北太平洋浪流相互作用对有效波高的影响研究

西北太平洋强流区会对海浪的特征和分布产生显著的影响,尤其是研究台风过程中海流与海浪的相互作用具有重要的研究意义。本文以ROMS海洋模式和SWAN海浪模式为基础,构建了浪流耦合模式系统,对2013年10月6-17日间的台风“丹娜丝”、“百合”、“韦帕”过程中西北太平洋浪流相互作用中海流对有效波高的影响进行了研究。通过对比模式模拟有效波高与浮标观测资料,发现耦合后的有效波高比非耦合结果更接近观测值,耦合模式中海流的存在对有效波高的分布有明显的影响。研究表明,特别是在有效波高峰值处,海流引起的有效波高增大最大可达1 m。海浪浪向及流向的空间分布以及中国近海浮标处浪向与流向的时间序列表明,流向与浪向反向时,海流的影响造成有效波高增大;二者同向时,有效波高减小。海流对有效波高的调整会沿着海浪传播的方向传播相当一段距离。在西北太平洋的海浪场计算中,引入海流的耦合模式计算结果对改善强流区海浪预报具有重要意义,并且海流的模拟精度对于高精度的海浪预报非常重要。     

高效液相色谱-离子阱质谱法测定海洋微藻藻粉中的8种脂溶性毒素

建立了利用高效液相色谱-电喷雾离子阱质谱(HPLC-ESI-IT-MS)测定海洋微藻藻粉中8种典型脂溶性毒素的分析方法。藻粉样品经超声细胞破碎后,采用超声波辅助提取法对藻毒素进行提取,用HPLC-ESI-IT-MS多反应离子监测(MRM)模式对各种毒素(包括大田软海绵酸(OA)、鳍藻毒素1(DTX-1)、扇贝毒素2(PTX-2)、虾夷扇贝毒素(YTX)、原多甲藻酸1(AZA1)原多甲藻酸2(AZA2)、罗环内酯毒素(SPX),米氏裸甲藻毒素(GYM))进行测定。8种脂溶性藻毒素均在线性范围内线性关系良好(R2均在0.991以上),检出限均介于0.085～1.315 pg之间,加标回收率在88.5%～111.4%之间,方法重复性相对标准偏差(RSD)在4.82%～10.17%范围。应用该方法对利玛原甲藻干藻粉中的毒素进行了测定,分析结果良好,说明本方法是海洋微藻藻粉中脂溶性藻毒素测定的有效方法。     

Advanced glycation endproducts in 35 types of seafood products consumed in eastern China

Advanced glycation endproducts(AGEs) have been recognized as hazards in processed foods that can induce chronic diseases such as cardiovascular disease, diabetes, and diabetic nephropathy. In this study, we investigated the AGEs contents of 35 types of industrial seafood products that are consumed frequently in eastern China. Total fluorescent AGEs level and Nε-carboxymethyl-lysine(CML) content were evaluated by fluorescence spectrophotometry and gas chromatography-mass spectrometry(GC-MS), respectively. The level of total fluorescent AGEs in seafood samples ranged from 39.37 to 1178.3 AU, and was higher in canned and packaged instant aquatic products that were processed at high temperatures. The CML content in seafood samples ranged from 44.8 to 439.1 mg per kg dried sample, and was higher in roasted seafood samples. The total fluorescent AGEs and CML content increased when seafood underwent high-temperature processing, but did not show an obvious correlation. The present study suggested that commonly consumed seafood contains different levels of AGEs, and the seafood processed at high temperatures always displays a high level of either AGEs or CML.     

Relationships among volcanic and hydrothermal activity and faults from the Shunnan 3-D well zone in the Tadong Area (Tarim Basin,China)

Tarim Basin distributed widely two stages of Permian volcanic rocks. However, the location and timing of these rocks pinching out and the relationship between Ordovician carbonate hydrothermal reservoirs and fault activity remain unclear. The Shunnan (Shunnan here in after referred to as SN) 1 3-D well zone in the eastern Tarim Basin contains volcanic rocks, and the Ordovician layer contains a hydrothermal reservoir. This paper describes the lithology, stage, volcanic rock distribution, crater position and deposition pinch-out line of volcanic rocks based on drilling and 3-D seismic data. The Permian strata in the well zone contain only one stage of Kupkuciman Formation basalt and tuff, the Kaipeleicike Formation contains terrigenous clastic rock and the adjacent volcanic rocks of wells SN2 and GL (Gulong here in after referred to as GL) 2 exhibit an absence of deposition. Although the craters are distributed on both sides of the NNW faults that cross well SN4, their positions are also controlled by the intersection of earlier NEE and NW faults and later NNE faults. Furthermore, the Ordovician strata in the SN1 well zone developed abundant tubular high-amplitude anomalies and tabular high-amplitude anomalies via hydrothermal corrosion, and the anomaly distributions are similar to the positions of the craters, which are controlled by the intersection of multi-group faults and the density of the faults.     

苏里格大型致密砂岩气田储层结构与水平井提高采收率对策

在分析苏里格气田辫状河体系及储层结构特征的基础上,提出了剖面储量集中度的概念,建立了厚层块状型、垂向叠置泛连通型、分散局部连通型、分散孤立型4种砂体分布模式,探讨了不同储层结构下的水平井采出程度,提出了水平井提高采收率技术对策。研究结果表明,辫状河沉积体系复合有效砂体由于“阻流带”的存在,直井动用不完善,水平井能克服“阻流带”的影响,提高层内储量动用程度;但由于砂体多层状分散分布,水平井开发会导致纵向含气层系储量动用不充分,影响层间采出程度。对于剖面储量集中度高的厚层块状型、垂向叠置泛连通型储层,采用水平井整体开发,Ⅰ+Ⅱ类井比例达70%以上,可显著提高储量动用程度和采收率。对于剖面储量集中度低的分散局部连通型储层,采用直井井网开发后进行甜点式优选水平井井位加密部署,可提高采收率10%以上。     

Characterizing groundwater/surface-water interactions in the interior of Jianghan Plain,central China

Hydrogeology Journal - Quantifying groundwater/surface-water interactions is essential for managing water resources and revealing contaminant fate. There has been little concern on the exchange...     

Study on the quantitative relationship between soil in situ strength and drilling parameters

The rational use of drilling parameters is a hot issue in the field of geotechnical engineering and geological engineering. A new method, for evaluating the bearing capacity of soils using drilling parameters was proposed. First, through the mechanical analysis of the drill bit, the preconditions and theoretical formulas for calculating the bearing capacity of soils using the bit’s torque are clearly defined. Next, drilling tests and dynamic cone penetration tests were performed on miscellaneous fill, silty clay, sandy clay, medium coarse sand and gravel sand, and the empirical formula for calculating the bearing capacity of these soils were given. Then, using the new method and the empirical formula, the bearing capacity of the soil under the roadbed was examined. The test results show that the bit’s torque is a good parameter for the evaluation of the bearing capacity of the soil. Finally, the application scope of the new method and the empirical formula is discussed, and the subsequent research directions are pointed out.