Geophysical characterisation of karstic networks – Application to the Ouysse system (Poumeyssen,France)

In the framework of the management of karstic aquifers, geophysical reconnaissance can be used to locate conduits and caves, and to characterise the surrounding limestone matrix. Suitable characterisation of heterogeneities in the karstic environment is, however, challenging for ground-based geophysical methods. The present article describes the results, and evaluates the response and accuracy of combined geophysical measurements carried out at the Poumeyssen test site in France, involving electrical resistivity imaging (ERI), magnetic resonance sounding (MRS), “mise-à-la-masse” electrical mapping, and seismic tomography. This site provides the opportunity to study a relatively wide, shallow, water-filled conduit whose location and shape are known from topographic work carried out by cave divers. Seismic and MRS provided the exact location and width of the conduit, to within a few meters. The seismic and electrical data suggest that the limestone medium surrounding the conduit is not homogeneous.     

Joint use of TEM and MRS methods in a complex geological setting

Transient Electromagnetic (TEM), known also as Time Domain Electromagnetic (TDEM) and Magnetic Resonance Sounding (MRS) methods were applied jointly to investigate variations in lithology and groundwater salinity in the Nahal Hever South area (Dead Sea coast of Israel). The subsurface in this area is highly heterogeneous and composed of intercalated sand and clay layers over a salt formation, which is partly karstified. Groundwater is very saline, with a chloride concentration of 100–225 g/l. TEM is known as an efficient tool for investigating electrically conductive targets like saline water, but it is sensitive to both the salinity of groundwater and the porosity of rocks. MRS, however, is sensitive primarily to groundwater volume, but it also allows delineating of lithological variations in water-saturated formations. MRS is much less sensitive to variations in groundwater salinity in comparison with TEM. We show that MRS enables us to resolve the fundamental uncertainty in TEM interpretation caused by the equivalence between groundwater resistivity and lithology. Combining TEM and MRS, we found that the sandy Dead Sea aquifer filled with Dead Sea brine is characterized by a bulk resistivity of ρ_x > 0.4 Ωm, whereas zones with silt and clay in the subsurface are characterized by a bulk resistivity of ρ_x < 0.4 Ωm. These observations are confirmed by calibration of the TEM method performed near 18 boreholes.     

Chemistry of metal–humic complexes contained in Megalopolis lignite and potential application in modern organomineral fertilization

Lignite samples from two deposits located in the Megalopolis Basin, Southern Greece, were evaluated for their potential applicability as raw materials for the production of organomineral fertilizers. Fundamental chemical analyses were carried out to demonstrate high humic substances and metal contents. To determine their relative distribution in the Megalopolis lignite extract, eight elements, namely Na, K, Cd, Mn, Mg, Pb, Zn, and Cu, were studied both in H₂O and in Na₄P₂O₇/NaOH solutions. The behavior of these metals showed significant variations; Zn, Pb, Cd, and Cu associate mostly to the humic substances and proved scarce in the water extract. Contrarily, K and Mg gave a significantly low total yield in the Na₄P₂O₇/NaOH solution, while Mn was classified among the least extracted elements. Further enrichment of Megalopolis humic substances in these metals was achieved; Pb and Mg proved the most and least retained metal, respectively. Decomplexation titration curves of humic matter saturated with these metal ions demonstrated that novel organomineral fertilizing materials may develop based on optimized metal ion and humate contents, which can retain metals in a soluble form within a wide pH range. Formation of complexes between humic substances and Zn, Cd, and Mg was clearly indicated.     

Object-based image analysis through nonlinear scale-space filtering

In this research, an object-oriented image classification framework was developed which incorporates nonlinear scale-space filtering into the multi-scale segmentation and classification procedures. Morphological levelings, which possess a number of desired spatial and spectral properties, were associated with anisotropically diffused markers towards the construction of nonlinear scale spaces. Image objects were computed at various scales and were connected to a kernel-based learning machine for the classification of various earth-observation data from both active and passive remote sensing sensors. Unlike previous object-based image analysis approaches, the scale hierarchy is implicitly derived from scale-space representation properties. The developed approach does not require the tuning of any parameter—of those which control the multi-scale segmentation and object extraction procedure, like shape, color, texture, etc. The developed object-oriented image classification framework was applied on a number of remote sensing data from different airborne and spaceborne sensors including SAR images, high and very high resolution panchromatic and multispectral aerial and satellite datasets. The very promising experimental results along with the performed qualitative and quantitative evaluation demonstrate the potential of the proposed approach.     

Morphological and molecular analysis of bloom-forming Cyanobacteria in two eutrophic, shallow Mediterranean lakes

We investigated the diversity of Cyanobacteria by microscopic observation and sequencing of cyanobacterial-specific amplified 16S rRNA genes in the water column of two shallow, eutrophic lakes (Doirani and Kastoria, northern Greece) during summer blooms. Previous phytoplankton studies in these lakes have shown that prolonged cyanobacterial blooms can occur, which are dominated by known toxic species, as well as other less known, co-occurring species. A total of 118 clones were sequenced which were grouped in 23 Cyanobacteria and 11 chloroplast-like phylotypes. Phylogenetic analysis revealed that each library included several unique phylotypes, as well as members of all common bloom-forming Cyanobacteria. Most of the phylotypes belonged to the genera Microcystis, Anabaena, Aphanizomenon, Cylindrospermopsis-Raphidiopsis group, Limnothrix and Planktothrix, comprising most of the diversity previously recognized by morphological observations in cyanobacterial morphospecies in these lakes. In addition, novel phylotypes belonging to the Chroococcales were recognized in both lakes. The structure of the cyanobacterial communities of the lakes were very similar, as revealed by the diversity index H (2.06 and 2.01 for L. Doirani and Kastoria, respectively) and LIBSHUFF analysis (XY₁₂P-value = 0.122 and YX₁₂P-value = 0.536), due to occurrence of groups of common phylotypes. This study gives an example for successful cyanobacterial bloom analysis by the combination of morphological and phylogenetic methods useful for monitoring cyanobacteria and water quality in freshwaters.     

Visitors’ perceptions on the management of an important nesting site for loggerhead sea turtle (Caretta caretta L.): The case of Rethymno coastal area in Greece

Tourism has important impacts, both positive and negative, on the management of coastal areas with high biodiversity value. It is therefore important to investigate visitors’ perceptions concerning environmental policy alternatives for these areas along with the factors influencing these perceptions. The present paper aims to investigate visitors’ perceptions of an important nesting ground for loggerhead sea turtles located in a highly touristic area of Greece (Rethymno, Crete) registered in the Natura 2000 network. The paper focuses on the level of environmental awareness of visitors and their perceptions of two proposed policy instruments which will secure funding for the improvement of the environmental management of the area: an entrance fee to the beach and a tax to be levied on local accommodation costs. The influence of social and institutional trust on these perceptions is also explored. According to the results of the study, awareness of the existence of the Natura 2000 site was low. Furthermore, the accommodation tax was regarded as a more effective policy when compared to the entrance fee. Average Willingness to Pay (WTP) was also explored for the two policies, estimated at €1.13 for the daily accommodation tax and €1.59 for the entrance fee. The influence of social and institutional trust had a significant influence both on the perceived level of effectiveness of the proposed policies and the stated Willingness to Pay. The study concludes that the accommodation tax would be a more appropriate policy for the management of Rethymno beach taking into consideration visitors’ perceptions and the current level of trust.     

The 30 October 2020, MW = 7.0, Samos earthquake: aftershock relocation,slip model,Coulomb stress evolution and estimation of shaking

Bulletin of Earthquake Engineering - We study the major MW = 7.0, 30 October 2020, Samos earthquake and its aftershocks, by calculating improved locations using differential travel times and...     

An integrative geological and geophysical approach to characterize a superficial deltaic aquifer in the Camargue plain,France

Deltaic aquifers are complex due to the important heterogeneity of their structure and their hydrogeological functioning. Auger drilling provides localized, but very robust geological and hydrogeological information, while geophysical surveys can provide integrated subsurface information. An effective, easy-to-use and low-cost methodology combining geological/hydrogeological information from Auger drillings and the results from three geophysical techniques (Electromagnetic mapping, Electrical Sounding and Electrical Resistivity Tomography) is being developed to characterize the structure of a typical Mediterranean deltaic aquifer. A first hypothesis about hydrodynamic properties of the aquifer is also obtained. The study area is located in the Rhone delta (Middle Camargue/southern France). Integration of geophysical and geological techniques allowed identifying the presence and lateral extension of the Saint-Ferréol paleochannel, the vertical contact between lagoonal–fluvial deposits and the marine clayed silt that separate the superficial aquifer from the deeper aquifer. Likewise, high north–south heterogeneity and east–west homogeneity were highlighted in the study area. Presence of clay in sandy deposits in the low areas implies changes in lateral hydraulic permeability. This fact, jointed to the low hydraulic gradient, suggests a slow groundwater flow in the local system. The Rhone delta presents a typical configuration of a Mediterranean deltaic aquifer, thus this methodological approach can be used for similar deltaic Mediterranean systems.     

Extension of direct displacement‐based design methodology for bridges to account for higher mode effects

An improvement is suggested to the direct displacement‐based design (DDBD) procedure for bridges to account for higher mode effects, the key idea being not only the proper prediction of a target‐displacement profile through the effective mode shape method (wherein all significant modes are considered), but also the proper definition of the corresponding peak structural response. The proposed methodology is then applied to an actual concrete bridge wherein the different pier heights and the unrestrained transverse displacement at the abutments result in an increased contribution of the second mode. A comparison between the extended and the ‘standard’ DDBD is conducted, while further issues such as the proper consideration of the degree of fixity at the pier's top and the effect of the deck's torsional stiffness are also investigated. The proposed methodology and resulting designs are evaluated using nonlinear response‐history analysis for a number of spectrum‐compatible motions. Unlike the ‘standard’ DDBD, the extended procedure adequately reproduced the target‐displacement profile providing at the same time a good estimate of results regarding additional design quantities such as yield displacements, displacement ductilities, etc., closely matching the results of the more rigorous nonlinear response‐history analysis. However, the need for additional iterations clearly indicates that practical application of the proposed procedure is feasible only if it is fully ‘automated’, that is, implemented in a software package. Copyright © 2012 John Wiley & Sons, Ltd.