The measurement of soil gases and shallow temperature for determination of active faults in a geothermal area: a case study from Ömer–Gecek,Afyonkarahisar (West Anatolia)

Afyonkarahisar is a very important geothermal province of western Anatolia and has low and medium enthalpy geothermal areas. This study has been carried out for the preparation of distribution maps of soil gases (radon and carbon dioxide) and shallow soil temperature and the exploration of permeable tectonic regions associated with geothermal systems and reveal the origins of radon and carbon dioxide gases. The western district of the study area is characterized by the high radon concentration (168.30 kBq/m³), carbon dioxide ratio (0.30%), and soil temperature (21.0 °C) values. Fethibey and Demirçevre faults, which allow the circulation of geothermal fluids, have been detected in the distribution maps of radon, carbon dioxide, and shallow depth temperature and the directions of the curves in these maps correspond to the strikes of Demirçevre faults. The effect of the fault plays an important role in the change of carbon dioxide concentration along the W-E directional geological section prepared to determine the change of soil gas and shallow depth temperature values depending on lithological differences, fault existence, and geothermal reservoir depth. On the other hand, it was determined that Rn²²² concentration and soil temperature changed as a function of geothermal reservoir depth or lithological difference. Tuffs in Köprülü volcano-sedimentary units are the main source of radon due to their higher uranium contents. Besides, the carbon dioxide in Ömer–Gecek soils has geothermal origin because of the highest carbon dioxide content (99.3%) in non-condense gas. The similarities in patterns of soil temperature, radon, and carbon dioxide indicate that the variation in soil temperatures is related to radon and carbon dioxide emissions. It is concluded that soil gas and temperature measurements can be used to determine the active faults in the initial stage of geothermal exploration successfully.     

Examination of the structural characteristics arising in gypsums by the GPR and MASW methods (Sivas,Turkey)

This study was performed at an area of 50?×?48 m² being defined as a new settlement in the northeast of Sivas. In the study, the discontinuities that are not deep and their geophysical characteristics were examined by the GPR and MASW methods. For interpretation, GPR cross sections were prepared as 2D–3D, and MASW cross sections were prepared as 2D. As for geophysical cross sections, about 10 m depth was examined. It was understood that the reflections observed in the form of hyperbolas in GPR cross sections correspond to areas having low S wave velocity (V_s) in MASW cross sections. It was understood that the S wave velocities are lower than 653 m/s, that the seismic velocities in between 653 and 275 m/s indicate partially deteriorated areas and that the S wave velocities of unweathered gypsums are higher than 1275 m/s at these low-velocity zones. Thus, it was thought that the fill material that may arise in the fracture, crack and deterioration areas arises from intercalation and clastic gypsum units, and that it plays a role in having low value S wave velocities. In all the geophysical cross sections, it was understood that the structures with gypsum are intense at the initial 5 m. And a fracture at the south of the study area, that it was estimated might be longer than 40 m, was determined as the largest gypsum structure. It was understood that this fracture starts from a depth of about 5 m in the west and that it slopes down to 7 m depth in the east. According to these results, it was understood that the damage amount arising in time in the gypsum structures from the effect of water may increase, the study area was defined as risky, and the required importance should be attached to these structures especially in foundation engineering.     

Automatic detection of earthquake-induced ground failure effects through Faster R-CNN deep learning-based object detection using satellite images

Natural Hazards - The seismically induced ground failure is defined as any earthquake-generated process that leads to deformations within a soil medium, which in turn results in permanent...     

The investigation of flood risk perception as a quantitative analysis from socio-demographic perspective

The priority of flood management planning is physical victimization and focuses on taking structural measures. Although this approach is an accurate approach, more information is needed in implementing efficient precautionary and planning decisions. It is an indisputable fact that the existence of nothing that is not sustainable in nature cannot continue. Hence, it is necessary to implement a planning decision suitable for the structure of the population living in the region so that the continuity of the policies to be carried out against natural hazards of hydrometeorological origin such as a flood is ensured. How the socio-demographic structures affect the flood risk perception of 245 people living in the city center of Bayburt is examined in this study. It is the first research conducted for the province of Bayburt for this perspective. The participants were asked to fill a questionnaire containing 24 items and consisting of 2 sections. T test and one-way ANOVA (one-way analysis of variance) statistical methods were used to ascertain the difference between the responses of the participants to the questionnaire, based on their demographic structure. As the result of the study, significant differences were observed between the expressions depicting flood risk perception and the participant's age, income levels and educational background. In addition, it has been noted that there is a positive relationship between education and income levels and flood risk perception.

     

Effect of disturbed zone thickness on rock slope stability

Natural Hazards - Cut slope surfaces are affected by excavation activities and weathering agents. Disturbances on the surface can penetrate down to a certain depth. Slope stability analyses made on...     

Deformation and stability of an elasto-plastic softening pillar

Summary A model of rock pillar or coal seam is considered assuming linear elastic behaviour before reaching the maximum strength and post-peak behaviour characterized by the residual strength. The deformation and stress across the pillar height are assumed to be uniform and the interaction with overlying rock strata is treated assuming beam model of the strata. The elasto-plastic stress distribution within pillar and the onset of instability occurring for the critical opening span are determined. Comparison with a solution for a simplified spring model of pillar is also presented.     

On melting of the subducted oceanic crust: Effects of subduction induced mantle flow

Based on petrological and geochemical arguments, it is possible that arc magma is derived from subducted oceanic crust. In this paper, regional thermal models have been constructed to study the feasibility of melting cold subducted oceanic crusts at shallow depth (i.e. at depths of about 100 km) by a dynamic mantle. Calculated results suggest that plate subduction will generate an induced flow in the wedge above the subducting slab. This current continuously feeds hot mantle material into the corner and onto the slab surface. A high temperature thermal environment can be maintained in the vicinity of the wedge corner, immediately beneath the over-riding plate. Our regional models further demonstrate quantitatively that production of local melting is possible just about 30 km down dip from the asthenosphere wedge corner. Additional geological processes such as reasonable amounts of shear heating and minor dehydration (which will lower the local melting temperature) will further increase the probability of melting a cold subducted oceanic crust at shallow depth.     

Lunar structure and dynamics - results from the apollo passive seismic experiment

Analysis of seismic signals from man-made impacts, moonquakes, and meteoroid impacts has established the presence of a lunar crust, approximately 60 km thick in the region of the Apollo seismic network; an underlying zone of nearly constant seismic velocity extending to a depth of about 1000 km, referred to as the mantle; and a lunar core, beginning at a depth of about 1000 km, in which shear waves are highly attenuated suggesting the presence of appreciable melting. Seismic velocitites in the crust reach 7 km s^–1 beneath the lower-velocity surface zone. This velocity corresponds to that expected for the gabbroic anorthosites found to predominate in the highlands, suggesting that rock of this composition is the major constituent of the lunar crust. The upper mantle velocity of about 8 km s^–1 for compressional waves corresponds to those of terrestrial olivines, pyroxenites and peridotites. The deep zone of melting may simply represent the depth at which solidus temperatures are exceeded in the lower mantle. If a silicate interior is assumed, as seems most plausible, minimum temperatures of between 1450°C and 1600°C at a depth of 1000 km are implied. The generation of deep moonquakes, which appear to be concentrated in a zone between 600 km and 1000 km deep, may now be explained as a consequence of the presence of fluids which facilitate dislocation. The preliminary estimate of meteoroid flux, based upon the statistics of seismic signals recorded from lunar impacts, is between one and three orders of magnitude lower than previous estimates from Earth-based measurements.Paper dedicated to Professor Harold C. Urey on the occasion of his 80th birthday on 29 April, 1973.     

On hypoelasticity and plasticity approaches to constitutive modelling of inelastic behaviour of soils

A comparative discussion of constitutive rate equations generated by using the hypoelasticity and plasticity theories is presented. If is shown that these two approaches are equivalent for the loading process but differ essentially in defining the unloading (or reverse loading) paths. The multisurface plasticity formulation proves to be more convenient in incorporating memory rules of particular loading events, whereas loading-unloading criteria used in hypoelasticity may result in an unrealistic prediction of material response for some loading paths, and in particular, for cyclic loading. The violation of the continuity condition between loading–unloading domains in proposed constitutive relations^3,4 limits their applicability to some particular classes of loading paths.     

Şarköy-Mürefte 1912 Earthquake's Tsunami, extension of the associated faulting in the Marmara Sea, Turkey

The historical tsunamis in the Marmara Seawere mainly caused by earthquakes andneeded to be documented. Following 1999Izmit earthquake occurred at the EasternMarmara region, a complete inventory ofactive faults in the Marmara Sea regionbecame much more stressed. To the west, thelatest event is 09.08.1912arköy-Mürefte Earthquake. Itoccurred on the active Ganos Fault zone andwas one of the largest earthquakes in theBalkans. The eastern termination of theassociated faulting is in the deep WestMarmara Trough, westernmost of thesuccessive basins forming the Marmara Sea.On the basis of recent multibeam bathymetryand seismic reflection data, estimatedtotal length of the surface rupture isabout 56 km. The historical data reviewedfrom library and archive documents,geological field surveys and offshoregeophysical investigations have shown thatthe 1912 earthquake produced a tsunami. Inaddition a seabed dislocation, the sourceof 1912 tsunami can also be assigned to thesediment slumps appearing in the form ofechelon landslide prisms along the southernslopes of the West Marmara Trough.