一种新的用于极化SAR图像船只检测的散射相似性测度

本文提出了一种新的用于极化合成孔径雷达（SAR）海上船只目标检测的测度。首先利用散射相似性参数研究船只与海杂波散射机制的差异。基于这些差异,提出了一种新的船只检测测度,该测度能够有效区分船只目标和海杂波。然后提出了利用核密度估计（KDE）方法对该测度进行建模的方法。基于统计模型,实现了自适应恒虚警率（CFAR）的检测方案。本文利用多景C波段RADARSAT-2极化SAR（Pol-SAR）数据上进行实验,系统分析了所提出测度的海杂波拟合性能与船只检测性能,并与两个经典的极化测度进行了比较,实验和比较结果证明了所提的测度的可行性。     

反向沙丘近地层气流变化及其对沙丘形态的影响

反向沙丘形态-动力学过程是风沙地貌的重要研究内容.选择腾格里沙漠东南缘推平沙地发育的反向沙丘为研究对象,采用二维超声风速仪对沙丘表面5个位置0.25 m和0.5 m高度的气流进行野外观测.结果表明:(1)气流方向影响近地层气流特征.以沙丘脊线垂线为轴,0.25 m高度处沙丘脊线的垂线两侧风向变化不完全对称.当丘顶气流方...     

Chemical analysis of mineral dust grains by SIMS: Application to a cometary mission

Analysis of a dust sample (e.g. collected during a cometary rendezvous mission) by SIMS (Secondary Ion Mass Spectroscopy) can provide information on elemental abundances (? 100 amu), the molecular composition of grain surfaces, and isotopic ratios of selected elements. This can be accomplished with dust covering as little as 10^?4 of the collector surface area. In order to demonstrate these capabilities a special experimental set-up for substrate preparation, dust collection and SIMS analysis of dust under ultrahigh vacuum conditions was developed. The comparison of elemental abundance ratios for different olivines and pyroxenes measured with the special SIMS equipment with that measured by an electron microprobe indicated an accuracy for SIMS of the elemental abundance measurements of ? 30%. By varying the energy threshold of secondary ions to be mass-analysed from 0 to 50 eV it is possible to identify molecular ions in the spectra and to estimate their abundance with respect to elemental ions on the same mass line. The ratios of molecular to elemental ions vary by a factor of 1–25. The concept for a future cometary rendezvous experiment as well as first results of chemical investigation on mineral dust samples obtained are reported.     

Comparison of Different Generation Mechanisms of Free Convection between Two Stations on the Tibetan Plateau

Based on high-quality data from eddy covariance measurements at the Qomolangma Monitoring and Research Station for Atmosphere and Environment(QOMS) and the Southeast Tibet Monitoring and Research Station for Environment(SETS),near-ground free convection conditions(FCCs) and their characteristics are investigated. At QOMS, strong thermal effects accompanied by lower wind speeds can easily trigger the occurrence of FCCs. The change of circulation from prevailing katabatic glacier winds to prevailing upslope winds and the oscillation of upslope winds due to cloud cover are the two main causes of decreases in wind speed at QOMS. The analysis of results from SETS shows that the most important trigger mechanism of FCCs is strong solar heating. Turbulence structural analysis using wavelet transform indicates that lowerfrequency turbulence near the ground emerges from the detected FCCs both at QOMS and at SETS. It should be noted that the heterogeneous underlying surface at SETS creates large-scale turbulence during periods without the occurrence of FCCs. Regarding datasets of all seasons, the distribution of FCCs presents different characteristics during monsoonal and non-monsoonal periods.     

梅雨锋云系内对流回波与层状回波的研究

本文利用1998年“淮河流域能量与水分循环试验（HUBEX）”所获得的大量雷达资料及遥测雨量计计资料，细致分析了淮河流域梅雨锋云系的结构，根据层状云和对流云在雷达回波图中的不同特征，本文提出用松散系数D（反映云系结构疏松程度）来区分大范围云带中的降水云类型，同529张PPI资料统计表明，若D＞0．17则说明该区结构松散，降水属于层状云降水，D≤0．17时，云区是对流性降水，由于梅雨锋水具有明显的不均匀结构特征，其中锋面对流云带和强下挂回波带是造成强降水的主要原因，在用地面雨量资料和雷达资料对地面降水进行短时（3小时以内）校正时，针对不同的降水类型采用不同的Z－R关系比用同一种Z－R关系的校正精度大约提高4％。     

新疆哈密三岔口铜矿成因探讨

三岔口铜矿含矿主岩为海西中期石英闪长岩—闪长岩体边缘相石类闪长(玢)岩和英云闪长斑岩。岩体形态简单,西宽东窄。含矿岩石Na_2O(?)K_2O,钙碱指数CA=67,里特曼指数δ=1,属钙性系列。磷灰石几乎不含氯,黄铁矿Co/Ni值为7.9。岩体蚀变弱,呈面状及不规则条带状,不具同心带状。流体包裹体气液比很小,为不饱和的低盐度包裹体。均一温度为150—240℃。该矿应为受断裂裂隙控制的中—低温热液交代-充填型铜矿床,不属斑岩型铜矿。     

乌拉山金矿带成矿物质来源的初步研究

通过原岩的含金建造,岩石含金性讨论,微量元素、稀土元素、包裹体特征及硫、氢、氧、碳、铅同位素的研究,对乌拉山金矿带成矿物质来源作了探讨。认为上有太古界乌拉山群是金矿形成初始矿源层,铅、硫等成矿物质主要来自地壳及下层富含金的某些强烈活动带,而成矿流体主要为渗流加热大气降水,部分来自变质—岩浆水的混合水。原岩属幔源分熔的基性—中基性火山沉积建造,幔源物质经后期大陆增生,沉积壳叠加改造,由幔源变成壳源物质,后期地质事件产生能源,使矿源层中的成矿物质活化,转移,富集成矿。     

Stress determination by back-analysis of excavation-induced stress changes — a case study

Summary An Underground Research Laboratory (URL) has been constructed by Atomic Energy of Canada Limited (AECL) to study various aspects of disposing of nuclear fuel waste in the Canadian Shield. In order to ensure good quality and long life of the construction, one important factor to be considered is the in situ stress field. As part of the research program, stress changes have been measured during the advance of a tunnel to monitor the stress response to excavation. It is desirable to estimate the state of in situ stress from these stress change measurements and to compare the results with overcoring data. This paper describes the application of a recently developed stress change fitting technique for stress determination. The basic principle and the fitting procedure are briefly summarized and the back-analysis process for the data collected at the URL is presented in detail. A boundary element model was used to predict the stress changes as required by the fitting approach. This new method of in situ stress determination was successfully applied in this case. The back-analyzed stresses agree very well with those determined from overcoring tests. The quality of individual measurements was assessed and the required minimum number of measurements for a conclusive data interpretation is evaluated.