马里亚纳弧前区锥形海山岩石学及成因

锥形海山是马里亚纳弧前区非火山成因的海山。它是由俯冲的太平洋板块对仰冲板块的上推作用,地壳下的上地幔物质底辟侵入的结果。海山顶部的岩石是由蛇纹石化超镁铁质方辉橄榄岩组成。其主要矿物成分为斜方辉石、橄榄石、尖晶石、磁铁矿、蛇纹石和碳酸盐。手标本呈显晶质块状构造,薄片中呈粒状、残留状、筛网状及斑状变晶结构。岩石化学特征表现为:低Si和Al,高M/F值,含水,亏损了所有过渡金属。岩石的成因属超基性岩浆直接结晶,后经海水的参入,在热液作用下普遍发生蛇纹石化和碳酸盐化。     

Paraconchoecia diacanthus n. sp., a new species of planktonic Ostracoda

Ｐａｒａｃｏｎｃｈｏｅｃｉａｄｉａｃａｎｔｈｕｓｎ．ｓｐ．,ａｎｅｗｓｐｅｃｉｅｓｏｆｐｌａｎｋｔｏｎｉｃＯｓｔｒａｃｏｄａ￥ＣｈｅｎＲｕｉｘｉａｎｇａｎｄＬｉｎＪｉｎｇｈｏｎｇ（ＲｅｃｅｉｖｅｄＡｐｒｉｌ１６,１９９３１ａｃｃｅｐｔｅｄＪｕｌｙ２０...     

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

碘－钒盐催化下合成的四溴邻苯二甲酸酐

报道一种新的有效催化剂－碘－钒盐和在一定条件下合成四溴邻苯二甲酸酐的方法。探讨催化剂的组成配比、用量、温度及废酸循环使用等因素对合成方法的影响。该催化剂的催化效果和常用的碘、碘－铁催化剂相同，适用于四溴邻苯二甲酸酐的合成。     

伶仃洋L＿2和L＿（16）孔第四纪有孔虫群与孢粉化石带特征及其地质意义

本文所依据的分析样品是取自珠江最大的一个河口湾伶仃洋中部的水下钻孔岩芯，其底部到达花岗岩基底。通过对第四纪有孔虫群与孢粉化石带特征的分析，阐明在相同的钻孔岩芯中，有孔虫分布变化所反映的古沉积环境特征与孢粉分析的古气候特征较为吻合，并与相应的沉积相对应，结合￣（１４）Ｃ和￣（２３０）Ｔｈ／￣（２３２）Ｔｈ比值法测年数据，从而较好地重塑本区晚更新世中期以来的地质历史。     

海底勘查技术的最新发展

本文将介绍用于探测海底三维地质特征的海底勘查的最新发展。它主要包括海底地形测绘技术，海底形貌观测技术、海底地层声学探测技术等。     

一种基于异步串行口的IBM-PC局部网

在综合的科学考察船上以异步通讯口实现的IBM-PC局部网具有较好的性能价格比。本文介绍了该网的联网环境、网络系统的组成及其拓扑结构、网络的服务功能以及网络软、硬件的安装和配置。     

钛胶海水提铀动力学研究Ⅱ——吸附机理的推断

海水提铀机理的研究,已逐渐受到重视,然而,至今研究还不是很深入,观点也各有差别.例如,Keen等[1]认为钛胶从海水中吸附铀是阳离子交换过程,即海水中的铀是UO₂2+离子的形式与钛胶进行交换;尾方升等[2]则倾向于阴离子吸着,即铀是以UO₂(CO₃)₃4-的形式被吸附.我们曾于1973年在海洋局系统的一次会议上提出阳离子给合交换的看法,并在后来的两次专业会议上予以补充发展.张正斌[3]认为是阳离子交换或一价阳离子失水络合.最近崔清晨[4]提出可能是UO₂(OH)₃-的络合吸附.根据几年来的工作,我们仍认为,钛胶从海水中的吸铀机理可能是一种阳离子形式的络合交换过程.     

培养基对海藻真菌PT2菌株的生长及活性代谢产物合成的影响

本文采用PD、GPY、YES、SYE、GPM5种不同培养基培养海藻真菌菌株PT2，并对其在不同培养基中的生长情况、代谢产物的形成及抗肿瘤活性进行分析，旨在了解不同培养基对菌株生长和活性物质合成的影响．结果显示，PT2菌株在不同培养基上的培养特征及生长速率有所不同，液体培养基发酵液抽提物的抗肿瘤活性也有较大差别，其中SYE发酵液抽提物活性最强，对KB、Raji和Hela 3种肿瘤细胞的IC50分别为7．6μg／cm^3、2．4μg／cm^3和3．3μg／cm^3．采用HPLC法对不同抽提物进行分析，发现它们之间的组成成分有显著差异．本文的实验结果表明，不同培养基对该菌株的生长及活性代谢产物的合成具有显著的影响。