Getting across information communities

Amazon’s deforestation affects citizens from varying information communities. Experts like scientists or journalists acquire relevant data on-site and publish valuable information on the Web. But different and sometimes conflicting views on reality impede sharing of information across communities, relevant content remains far too often undiscovered. We introduce rule-based semantic annotations as solution to facilitate the discovery and evaluation of geographical information. With the distinction between shared domain and local information source ontologies, the proposed architecture of a semantically supported SDI for the Amazon also takes the plethora of GI formats into account. Creating semantic annotations is challenging, a recommender system for semantic annotations enables even the non-IT experts to participate. The benefits of the proposed techniques are further illustrated by a scenario which spans across information communities of economics, ecology, and ethnology.     

Recurrent mesoproterozoic continental magmatism in South-Central Norway

We report U–Pb dates and Lu–Hf isotope data, obtained by LAM-ICPMS, for zircons from metamorphic rocks of the Setesdalen valley, situated in the Telemark block south of the classic Telemark region of southern Norway. The samples include infracrustal rocks from the metamorphic basement, metaigneous rocks and metasediments from the Byglandsfjorden supracrustal cover sequence, and metaigneous rocks which intruded the whole succession. The main crustal evolution took place from 1,550–1,020 Ma, beginning with the emplacement of juvenile tonalitic melts; the contribution of older crustal material increased with time. Around 1,320 Ma, further addition of juvenile material occurred, involving both mafic and felsic melts, metamorphism and deformation. Acid magmas with high FeO*/MgO were intruded at 1,215 Ma, coinciding with underplating elsewhere in South Norway. The period starting at 1,215 Ma is represented by supracrustal rocks, principally metarhyolites with minor mafic material and immature sediments of the Byglandsfjorden Group. The crust generation processes ended with the intrusion of diorites and granodiorites at 1,030 Ma, late in the Sveconorwegian orogeny. Regional processes of metamorphism and deformation (around 1,290 and 1,000 Ma) can be related to the assembly of Rodinia. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Range imaging: a new method for high‐resolution topographic measurements in small‐ and medium‐scale field sites

Topographic measurements are essential for the study of earth surface processes. Three‐dimensional data have been conventionally obtained through terrestrial laser scanning or photogrammetric methods. However, particularly in steep and rough terrain, high‐resolution field measurements remain challenging and often require new creative approaches. In this paper, range imaging is evaluated as an alternative method for obtaining surface data in such complex environments. Range imaging is an emerging time‐of‐flight technology, using phase shift measurements on a multi‐pixel sensor to generate a distance image of a surface. Its suitability for field measurements has yet not been tested. We found ambient light and surface reflectivity to be the main factors affecting error in distance measurements. Low‐reflectivity surfaces and strong illumination contrasts under direct exposure to sunlight lead to noisy distance measurements. However, regardless of lighting conditions, the accuracy of range imaging was markedly improved by averaging multiple images of the same scene. For medium ambient lighting (shade) and a light‐coloured surface the measurement uncertainty was approximately 9 mm. To further test the suitability of range imaging for field applications we measured a reach of a steep mountain stream with a horizontal resolution of approximately 1 cm (in the focal plane of the camera), allowing for the interpolation of a digital elevation model on a 2 cm grid. Comparison with an elevation model obtained from terrestrial laser scanning for the same site revealed that both models show similar degrees of topographic detail. Despite limitations in measurement range and accuracy, particularly at bright ambient lighting, range imaging offers three‐dimensional data in real time and video mode without the need of post‐processing. Therefore, range imaging is a useful complement or alternative to existing methods for high‐resolution measurements in small‐ to medium‐scale field sites. Copyright © 2012 John Wiley & Sons, Ltd.     

Using snakes for the registration of topographic road database objects to ALS features

For historical reasons many national mapping agencies store their topographic data in a dual system consisting of a Digital Landscape Model (DLM) and a Digital Terrain Model (DTM). The DLM contains 2D vector data representing objects on the Earth’s surface, such as roads and rivers, whereas the DTM is a 2.5D representation of the related height information, often acquired by Airborne Laser Scanning (ALS). Today, many applications require reliable 3D topographic data. Therefore, it is advantageous to convert the dual system into a 3D DLM. However, as a result of different methods of acquisition, processing, and modelling, the registration of the two data sets often presents difficulties. Thus, a straightforward integration of the DTM and DLM might lead to inaccurate and semantically incorrect 3D objects.In this paper we propose a new method for the fusion of the two data sets that exploits parametric active contours (also called snakes), focusing on road networks. For that purpose, the roads from a DLM initialise the snakes, defining their topology and their internal energy, whereas ALS features exert external forces to the snake via the image energy. After the optimisation process the shape and position of the snakes should coincide with the ALS features. With respect to the robustness of the method several known modifications of snakes are combined in a consistent framework for DLM road network adaptation. One important modification redefines the standard internal energy and thus the geometrical model of the snake in order to prevent changes in shape or position not caused by significant features in the image energy. For this purpose, the initial shape is utilized creating template-like snakes with the ability of local adaptation. This is one crucial point towards the applicability of the entire method considering the strongly varying significance of the ALS features. Other concepts related to snakes are integrated which enable our method to model network and ribbon-like characteristics simultaneously. Additionally, besides ALS road features information about context objects, such as bridges and buildings, is introduced as part of the image energy to support the optimisation process. Meaningful examples are presented that emphasize and evaluate the applicability of the proposed method.     

FESOM under coordinated ocean-ice reference experiment forcing

Characteristics of the ocean state simulated with the Finite-Element Sea-Ice Ocean Model (FESOM) under the normalized year forcing of Coordinated Ocean-ice Reference Experiments (COREs; Griffies et al., Ocean Model 26:1–46, 2009) are compared with those of other models participating in COREs. In contrast to these models, FESOM is run on an unstructured mesh (with resolution varying between 20 and 150 km). It is shown that the ocean state simulated by FESOM is in most cases within the spread of other models, demonstrating that the unstructured mesh technology has reached the stage when it becomes a reliable tool for studying the large-scale ocean general circulation.     

Mechanical compaction and ultrasonic velocity of sands with different texture and mineralogical composition

This study presents the results of experimental compaction while measuring ultrasonic velocities of sands with different grain size, shape, sorting and mineralogy. Uniaxial mechanical compaction tests up to a maximum of 50 MPa effective stress were performed on 29 dry sand aggregates derived from eight different sands to measure the rock properties. A good agreement was found between the Gassmann saturated bulk moduli of dry and brine saturated tests of selected sands. Sand samples with poor sorting showed low initial porosity while sands with high grain angularity had high initial porosity. The sand compaction tests showed that at a given stress well‐sorted, coarse‐grained sands were more compressible and had higher velocities (Vp and Vs) than fine‐grained sands when the mineralogy was similar. This can be attributed to grain crushing, where coarser grains lead to high compressibility and large grain‐to‐grain contact areas result in high velocities. At medium to high stresses the angular coarse to medium grained sands (both sorted sands and un‐sorted whole sands) showed high compaction and velocities (Vp and Vs). The small grain‐to‐grain contact areas promote higher deformation at grain contacts, more crushing and increased porosity loss resulting in high velocities. Compaction and velocities (Vp and Vs) increased with decreasing sorting in sands. However, at the same porosity, the velocities in whole sands were slightly lower than in the well‐sorted sands indicating the presence of loose smaller grains in‐between the framework grains. Quartz‐poor sands (containing less than 55% quartz) showed higher velocities (Vp and Vs) compared to that of quartz‐rich sands. This could be the result of sintering and enlargement of grain contacts of ductile mineral grains in the quartz‐poor sands increasing the effective bulk and shear stiffness. Tests both from wet measurements and Gassmann brine substitution showed a decreasing Vp/Vs ratio with increasing effective stress. The quartz‐rich sands separated out towards the higher side of the Vp/Vs range. The Gassmann brine substituted Vp and Vs plotted against effective stress provide a measure of the expected velocity range to be found in these and similar sands during mechanical compaction. Deviations of actual well log data from experimental data may indicate uplift, the presence of hydrocarbon, overpressure and/or cementation. Data from this study may help to model velocity‐depth trends and to improve the characterization of reservoir sands from well log data in a low temperature (<80–100^o C) zone where compaction of sands is mostly mechanical.     

Composition and origin of organic matter in surface sediments of Lake Sarbsko: A highly eutrophic and shallow coastal lake (northern Poland)

We present an organic geochemical study of surface sediments of Lake Sarbsko, a shallow coastal lake on the middle Polish Baltic coast. The aim was to provide evidence concerning the origin of the organic matter (OM) and its compositional diversity in surface deposits of this very productive, highly dynamic water body. The content and composition of the OM in the bottom sediments were investigated at 11 sampling stations throughout the lake basin. OM sources were assigned on the basis of bulk indicators [total organic carbon (TOC), total nitrogen (TN), δ¹³C_TOC and δ¹⁵N and extractable OM yield], biomarker composition of extractable OM and compound-specific C isotope signatures. The source characterization of autochthonous compounds was verified via phytoplankton analysis. The distribution of gaseous hydrocarbons in the sediments, as well as temporal changes in lake water pH, the concentration of DIC (dissolved inorganic carbon) and δ¹³C_DIC were used to trace OM decomposition.The sedimentary OM is composed mainly of well preserved phytoplankton compounds and shows minor spatial variability in composition. However, the presence of CH₄ and CO₂ in the bottom deposits provides evidence for microbial degradation of sedimentary OM. The transformation of organic compounds in surface, bottom and pore waters via oxidative processes influences carbonate equilibrium in the lake and seasonally favours precipitation or dissolution of CaCO₃.The data enhance our understanding of the relationships between the composition of sedimentary OM and environmental conditions within coastal ecosystems and shed light on the reliability of OM proxies for environmental reconstruction of coastal lakes.     

Wind-induced drift of objects at sea: The leeway field method

A method for conducting leeway field experiments to establish the drift properties of small objects (0.1-25 m) is described. The objective is to define a standardized and unambiguous procedure for condensing the drift properties down to a set of coefficients that may be incorporated into existing stochastic trajectory forecast models for drifting objects of concern to search and rescue operations and other activities involving vessels lost at sea such as containers with hazardous material.An operational definition of the slip or wind and wave-induced motion of a drifting object relative to the ambient current is proposed. This definition taken together with a strict adherence to a 10 m wind speed allows us to refer unambiguously to the leeway of a drifting object. We recommend that all objects if possible be studied using what we term the direct method, where the object’s leeway is studied directly using an attached current meter.We establish a minimum set of parameters that should be estimated for a drifting object for it to be included in the operational forecast models used for prediction of search areas for drifting objects.We divide drifting objects into four categories, depending on their size. For the smaller objects (less than 0.5 m), an indirect method of measuring the object’s motion relative to the ambient current must be used. For larger objects, direct measurement of the motion through the near-surface water masses is strongly recommended. Larger objects are categorized according to the ability to attach current meters and wind monitoring systems to them.The leeway field method proposed here is illustrated with results from field work where three objects were studied in their distress configuration; a 1:3.3 sized model of a 40-foot Shipping container, a World War II mine and a 220 l (55-gallon) oil drum.     

Factors affecting the Nd3+ (REE3+) luminescence of minerals

In this paper, possibilities and limits of the application of REE³⁺ luminescence (especially the Nd^{3+ 4}F_3/2 → ⁴I_9/2 emission) as structural probe are evaluated. Important factors controlling the Nd³⁺ luminescence signal are discussed, including effects of the crystal-field, crystal orientation, structural state, and temperature. Particular attention was paid to the study of the accessory minerals zircon (ZrSiO₄), xenotime–(Y) (YPO₄), monazite–(Ce) (CePO₄) and their synthetic analogues. Based on these examples we review in short that (1) REE³⁺ luminescence can be used as non-destructive phase identification method, (2) the intensities of certain luminescence bands are strongly influenced by crystal orientation effects, and (3) increased widths of REE³⁺-related emission bands are a strong indicator for structural disorder. We discuss the potential of luminescence spectroscopy, complementary to Raman spectroscopy, for the quantitative estimation of chemical (and potentially also radiation-induced) disorder. For the latter, emissions of Nd³⁺-related centres are found to be promising candidates.